Hydrolytic degradation of POSS-PEG-lactide hybrid hydrogels

A polyhedral oligomeric silsesquioxane (POSS), functionalized with eight arms of poly(ethylene glycol) (PEG; MW 400) and then acrylated, was incorporated into a hydrogel network based on triblock copolymers of poly(lactide-b-ethylene glycol-b-lactide) diacrylates using a redox-initiated polymerization. The organic-inorganic hybrid hydrogels so prepared contained the inorganic crosslinker POSS from 1 to 28 wt.%. The degradation properties of the hydrogels in a pH 7.4 phosphate-buffered saline solution at 37 °C were studied using measurements of mass loss, cryogenic SEM, and ATR-FTIR spectroscopy. It was found that copolymerization of acrylated 1kPEG-lactide with increasing amounts of POSS created a more porous network which was more resistant to hydrolysis. The ATR-FTIR technique was used to monitor the progress of degradation with exposure time through the changes in the carbonyl and C-H deformation bands of the lactide and the Si-C stretching band of the POSS. Increasing POSS incorporation resulted in decreased rate of degradation due to its hydrophobic nature and inertness to hydrolysis. Conversely, an increase in lactide content increased the degradation rate due to the increased number of hydrolytically-sensitive ester groups in the network.     

The hydrolytic effect of moisture and hygrothermal aging on poly(butylene succinate)/organo-montmorillonite nanocomposites

The study of hydrolysis on biodegradable poly(butylene succinate) (PBS) is essential to predict the materials properties in a humid environment. In this study, PBS nanocomposites were exposed to different conditions of relative humidity (RH) and temperature. The moisture uptake increased with organo-montmorillonite (OMMT) loading and the RH of the testing environment. The exposure of PBS and the nanocomposites to a humid environment caused changes in the mechanical properties. The hydrolytic degradation becomes more pronounced upon hygrothermal aging at high temperature, whereby premature failure occurred. PBS nanocomposites were found to exhibit a better hydrolytic stability than neat PBS. The degradation was evaluated through Fourier transform infrared (FTIR) spectroscopy and gel permeation chromatography (GPC). A drastic reduction in the molecular weight of PBS has revealed the occurrence of degradation after exposure to moisture and heat. This has led to an alteration of the thermal behavior as investigated using differential scanning calorimetry (DSC).     

An in situ oxidation route to fabricate graphene nanoplate-metal oxide composites

We report our studies on an improved soft chemical route to directly fabricate graphene nanoplate-metal oxide (Ag₂O, Co₃O₄, Cu₂O and ZnO) composites from the in situ oxidation of graphene nanoplates. By virtue of H⁺ from hydrolysis of the metal nitrate aqueous solution and NO₃⁻, only a small amount of functional groups were introduced, acting as anchor sites and consequently forming the graphene nanoplate-metal oxide composites. The main advantages of this approach are that it does not require cumbersome oxidation of graphite in advance and no need to reduce the composites due to the lower oxidation degree. The microstructures of as-obtained metal oxides on graphene nanoplates can be dramatically controlled by changing the reaction parameters, opening up the possibility for processing the optical and electrochemical properties of the graphene-based nanocomposites.     

Hydrolysis of the amide bond in N-acetylated l-methionylglycine catalyzed by various platinum(II) complexes under physiologically relevant conditions

The hydrolytic reactions between various Pt(II) complexes of the type [Pt(L)Cl₂] and [Pt(L)(CBDCA-O,O′] (L is ethylenediamine, en; (±)-trans-1,2-diaminocyclohexane, dach; (±)-1,2-propylenediamine, 1,2-pn and CBDCA is the 1,1-cyclobutanedicarboxylic anion) and the N-acetylated l-methionylglycine dipeptide (MeCOMet-Gly) were studied by ¹H NMR spectroscopy. All reactions were realized at 37 °C with equimolar amounts of the Pt(II) complex and the dipeptide at pH 7.40 in 50 mM phosphate buffer in D₂O. Under these experimental conditions, a very slow cleavage of the Met-Gly amide bond was observed and this hydrolytic reaction proceeds through the intermediate [Pt(L)(H₂O)(MeCOMet-Gly-S)]⁺ complex. In general, it can be concluded that faster hydrolytic cleavage of the MeCOMet-Gly dipeptide was observed in the reaction with the chloride complex than with corresponding CBDCA Pt(II) complexes. The steric effects of the Pt(II) complex on the hydrolytic cleavage of the amide bond in the MeCOMet-Gly dipeptide were also investigated by ¹H NMR spectroscopy. It was found that the rate of hydrolysis decreases as the steric bulk of the CBDCA and chlorido Pt(II) complexes increase (en > 1,2-pn > dach). These results contribute to a better understanding of the toxic side effects of Pt(II) antitumor drugs and should be taken into consideration when designing new potential Pt(II) antitumor drugs with preferably low toxic side effects.     

聚乳酸立构复合物的研究最新进展与应用展望

立构复合型聚乳酸(SC-PLA)由于聚左旋乳酸(PLLA)与聚右旋乳酸(PDLA)分子链之间强烈的相互作用,可以使熔点提高约50℃,改善了聚乳酸在耐热性上的不足,同时这种立构复合结构使聚乳酸的力学性能、结晶性能、耐水解性等也得到提升.立构复合型聚乳酸的合成新进展主要集中在嵌段型SC-PLA的制备,同时广泛采用X射线衍射...     

Optimized polymer-enzyme electrostatic interactions significantly improve penicillin G amidase efficiency in charged PEGA polymers

Hydrolytic yields as high as 80% were obtained by using penicillin G amidase (PGA) on substrates anchored on optimized positively charged PEGA polymers. By increasing the amount of permanent charges inside the polymer, electrostatic interactions between the positively charged PEGA⁺ and the negatively charged PGA (pI=5.2-5.4) were strengthened, thus favouring the accessibility of the bulky enzyme (MW=88 kDa) inside the pores. The effect of different amounts of charges on polymer swelling and protein retention inside the polymer was investigated and correlated to the enzyme efficiency demonstrating that electrostatic interactions predominate over swelling properties in determining enzyme accessibility.     

Steady-State Kinetics of Aminopeptidase Catalysis: A Stopped-Flow Radiationless Energy Transfer Study

Stopped-flow radiationless energy transfer experiments have been carried out to investigate the hydrolysis of some dansyl peptide substrates (S) catalyzed by aminopeptidase (E). RET between enzyme tryptophanyl residues and the dansyl group in the substrate allowed direct observation and quantitation of the enzyme-substrate (ES) complexes. Analysis of the stopped-flow RET traces gives k_cat = 1.32 s^?1 and K_M = 47 μM for Leu-Ala-NH(CH₂)₂NH-Dns (Leu-Ala-DED) and k_cat = 4.80 s^?1 and K_M = 196 μM for Leu-Gly-NH(CH₂)₂NH-Dns (Leu-Gly-DED). The activation energies of the enzymatic reactions were determined from the Arrhenius plots to be 57 and 38 kJ mol^?1 for Leu-Ala-DED and Leu-Gly-DED, respectively. The kinetic results indicate that the enzyme binds Leu-Ala-DED more tightly than Leu-Gly-DED as revealed by a small value of K_M. That this enzyme catalyzes the turnover of Leu-Gly-DED more efficiently than Leu-Ala-DED is reflected in a large value of k_cat and a small activation energy. The RET signals during the hydrolysis of Leu-Val-NH(CH₂)₂NH-Dns were extremely weak probably because of the inefficient energy transfer in the ES complex or the retention of the product in the enzyme after completion of the reaction. Aminopeptidase was inactive towards the dansyl compounds of the single amino acid studied. This fact may be due to an unfavorable conformation of these compounds in the ES complexes (small k_cat) or a weak binding of the substrates to the enzyme (large K_M) or both.     

Surface properties and aggregation of basic aluminium sulphate hydrolysis products: 1. Electrokinetic potential and hydration of BAS hydrolysis product particles

The action of pre-hydrolysed coagulants such as basic aluminium chloride (BAC) and sulphate (BAS) in water treatment is of considerable practical and fundamental interest. Variables such as working solution concentration, dosage, pH and ionic strength are known to be important. We have investigated the influence of these variables on the ζ-potential and degree of hydration of hydrolysis products of basic aluminium sulphate samples with different basicities. The products were characterised by a timed ferron complexation procedure, giving information on the degree of polymerisation of the BAS samples. Electrokinetic measurements showed that the ζ-potentials of hydrolysis product particles were consistently higher (more positive) for the higher basicity samples. The ζ-potential decreased with increasing concentration of the working solution and with increased dosage.

The degree of hydration of the hydrolysis products was investigated using the spin-lattice relaxation time of protons of water molecules bound to their surfaces. This was found to decrease with increasing basicity of BAS, indicating a greater degree of hydration. Since this effect is expected to decrease ζ potential by a displacement of the electrokinetic shear plane, the observed increase in ζ is probably due to the adsorption of highly charged positive hydrolysis products of BAS.     

聚苯乙烯—吡啶树脂的合成及催化水解反应

在氢氧化钠作用下，氯甲基化聚苯乙烯与吡啶反应制成聚苯乙烯－吡啶树脂，测定了其化学组成和红外光谱，并考察了在酯水解反应中的催化活性。     

2-亚甲基丁二酸酐和甲基丙烯酸甲酯的共聚反应研究

2—亚甲基—丁二酸酐(M_1,ITANH)和甲基丙烯酸甲酯(M_2,MMA)在四氢呋喃(THF)中以过氧化二苯甲酰(BPO)作引发剂进行自由基共聚合。由作图法衣得这两种单体在66℃的共聚竞聚率:表明它们趋于嵌均共聚。用粘度法和GPC测量了共聚物的分子量和分子量分布。共聚物在温和的条件下进行部分水解,得到一带有短的羧基侧链的聚电解质[11]。将[11]与无机盐LiClO_4混合后测得电导率δ-2.8272×10~(-4)S·cm~(-1),表明它具有较好的离子导电性。