理想流体一维绝热稳定流动能量方程推导

对理想流体一维绝热稳定流动作了讨论．对一般理想流体(可压缩或不可压缩)，用两种方法推出了能量方程．在此基础上，讨论了流动可逆性及不同流体性质对流动参数的影响．     

饱和水蒸汽与水的焓与熵参数的新关联式

饱和水蒸汽与水的焓与熵参数的新关联式李斯特，马润梅，吴冷（北京化工大学机械工程系北京１０００２９）关键词统计力学，剩余函数，焓与熵１引言本文根据统计力学与热力学剩余函数原理，结合本课题组曾已建立的饱和水蒸汽与水的新简明状态方程模型，经推导出一则适合于...     

La（NCS）3.4.5H2O和B15C5在乙醇中的相平衡及热化学研究

采用半微量相平衡方法测定了三元体系Ｌａ（ＮＣＳ）３．４．５Ｈ２Ｏ－Ｂ１５Ｃ５－Ｃ２Ｈ５ＯＨ在２９８．１５Ｋ的溶解度，测定了各饱和溶液的折光率。     

配合物的生成热和配体的质子化热之间的直线焓关系——Ⅶ.Ni(Ⅱ)-2,2′-联吡啶-N-(间位取代苯基)氨基乙酸三元体系

有关Ni(Ⅱ)-N-(间位取代苯基)氨基乙酸二元体系的直线焓和直线熵关系,前文已有报道,本文报告Ni(Ⅱ)-2,2′-联吡啶-N-(间位取代苯基)氨基乙酸(Ni(Ⅱ)-biPy-m-RPhG:R=CH_3,H,CH_3O,Cl)三元体系的生成热研究,发现在此三元体系中亦存在良好的直线焓和直线熵关系。     

Thermodynamic properties of transition metals in aqueous solution. 2. The enthalpies of mixing of aqueous solutions of CoCl2, CuCl2, and MnCl2 with NaCl at varying ionic strength at 25°C

Enthalpies of mixing (_m H) aqueous solutions of CoCl₂, CuCl₂, and MnCl₂ with NaCl solutions were measured at constant ionic strengths of 0.5, 1.0, and 3.0 molal at 25°C. The excess enthalpy equations of Pitzer were then fit to the resulting _m H data. The resulting parameters are the temperature derivatives of the activity coefficient mixing parameters in the Pitzer system. The heat of mixing data for CoCl₂ and CuCl₂ were in agreement with earlier isomolal results by other workers.     

氮杂冠醚与碱金属离子配位反应的研究

滴定量效法是研究反应热化学和热力学的重要手段之一．用这种方法对冠醚与金属离子的配位反应热力学性质进行研究一直受到很大关注【且S习．但是对氨杂冠林，尤其是一系列结构相似的氨杂冠醚体系进行系统的热力学性质研究的报导不多．前文K则曾报导了用自组装的消定量热计对银（I）－a吹体系和铜（11）·N，N’一问位取代革基乙二胺体系的配位反应热化学研究结果·本文报导从（对位取代革基）k杂15冠5卜RPW15CS，R＝CIZH；CHa；CHso）与碘化钠和碘化钾在25T、无水乙过溶液中进行配位反应的消定量效研究结果．讨论了配体上取代基的电…     

(R)-N-乙酰四氢噻唑-2-硫酮-4-羧酸的合成和量子化学研究

（R）－N－乙酰四氢噻唑－2－硫酮－4－羧酸在三乙胺存在下同乙酰氯反应得到光学活性产物（R）－N－乙酰四氢噻唑－2－硫酮－4－羧酸．用半经验的量子化学方法研究反应物及产物的电子结构和反应热焓．     

Calorimetric approach to tetronic/water interactions

Tetronic^®comprises X-shaped copolymers formed by four poly(propylene oxide) (PPO) andpoly(ethylene oxide) (PEO) block chains bonded to an ethylene diamine centralgroup. Micellization behaviour of three representative Tetronics (T304, T904and T1307) was characterized to gain an insight into the interactions betweenthe copolymer unimers and the state of water in their solutions. The enthalpyof demicellization, recorded at 37°C in an isoperibol microcalorimeter,indicated that the process was in all cases exothermic and the enthalpy rankedin the order T1307≥T904>>T304. Micellization is entropy-driven owing tohydrophobic interactions between the PPO chains.DSC analysisshowed that the crystallization and melting peaks of the free water remainingin T304 and T904 solutions were progressively shifted toward lower temperaturesas the surfactant proportion increased, owing to a colligative effect. Boundwater corresponded to 3 water molecules per EO repeating unit. In the caseof T1307, which has longer PEO chains, a splitting of the melting peak wasobserved, one peak appearing around 0°C due to free water and anotherat –15°C due to interfacial water. As T1307 proportion raised, theenthalpy of the former decreased, whilst the enthalpy of the latter increased.In 40% T1307 solutions, interfacial water overcame the proportion of freewater; there being 1 interfacial and 3 bound water molecules per EO repeatingunit. Gaussian deconvolution of FTIR spectra also enabled to characterizethe evolution of free water as a function of Tetronic proportion. The dependenceof micellization and water interaction behaviour on Tetronics structure shouldbe taken into account to use these copolymers as drug solubilizers and micellarcarriers.