Determination of the boiling point distribution of sulfur compounds in light cycle oil using GC with a flame photometric detector and pyrolyzer

A method has been developed to determine the boiling point distribution of sulfur compounds in light cycle oils (LCO'S). The method chosen for this analysis was GC with a flame photometric detector (FPD) and pyrolyzer. Tests were carried out to evaluate the recovery efficiency, repeatability, and accuracy of the method. Repeatabilities within 2% were obtained. The recovery of benzothiophenes and dibenzothiophenes was close to 100%; this was important because these are the major sulfur components in LCO's. No hydrocarbon or solvent interferences were observed with the use of the pyrolyzer, even for a 95% solvent level. Comparison with results from other techniques showed that the method accurately determined the levels of sulfur compounds in the LCO boiling point range.     

Nitro musks in cosmetic products—determination by headspace solid-phase microextraction and gas chromatography with atomic-emission detection

Summary The combination of headspace solid-phase microextraction with atomic-emission detection enables highly selective and sensitive determination of itro musk compounds in cosmetic products. Sample preparation is considerably simplified; there is no solvent extraction step. Enrichment is influenced by the type and amount of cosmetic product investigated. The lowest amount giving well detectable peaks is 1 mg musk compound per kg sample. Calibration curves obtained from spiked solutions of selected reference cosmetics in water show very good linearity. Relative standard deviations of peak areas from repeated measurements are usually <10%. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

高剂量率单次快脉冲辐射参量测量

记述了“强光一号”高剂量率脉冲辐射装置在状态调试过程中对其出射波形和辐射剂量进行监测的基本情况，实际监测的结果与设计方监测的结果进行了比对，双方的剂量监测值基本一致，偏差在20％以内；双方的波形形状十分相似，但测量得到的波形半宽度却相差10～20ns，最后对双方束流监测产生的差异进行了定性分析。     

Basic principles of technological shaping of optical properties and radiation hardness of PWO crystals

Technological conditions ensuring growth of optically homogeneous lead tungstate (PWO) crystals are reported. It is shown that the basic scintillator characteristics of PWO grown from highly purified raw material and properly doped with lanthanides are mainly determined by inclusions of oxides W_1−yL_yO_3−x (L=Y, La, Gd; 0<x<0.3). Moreover, surface-located inclusions with structure close to tungstenite may also be of importance. It is demonstrated that the scintillation properties can be intentionally designed by varying the oxygen content in the inclusions x and the surface structure. The optimal value for x and the most favorable surface structure are achieved by proper thermal regimes and environment content during the crystal annealing. The results enabled low-cost fabrication of PWO scintillators with steady and reproducible characteristics acceptable for the CERN project ALICE and ensured production of PWO on an industrial scale by “North Crystals” company at a rate of 125–135 crystals per year from every growth apparatus.     

苯磺酰苯胺类药物理化性能的研究

利用高效液相色谱和分光光度法，研究了新合成的5个苯磺酰苯胺类化合物的酸离解常数和脂溶性，结果表明，他们具有较弱的酸性和合适的脂溶性。预计会有较好的抗肝片吸虫活性。     

InAs/GaAs quantum dot infrared photodetectors with different growth temperatures

InAs/GaAs quantum dot infrared photodetectors were fabricated with quantum dots grown at three different temperatures. Large detection wavelength shift (5–14.5 μm) was demonstrated by changing 40 degrees of the epitaxy temperature. The smaller quantum dots grown at lower temperature generate 14.5 μm responses. The detectivity of the normal incident 15 μm QDIP at 77 K is 3 × 10⁸ cm Hz^1/2/W. A three-color detector was also demonstrated with quantum dots grown at medium temperature. The three-color detection comes from two groups of different sizes of dots within one QD layer. This new type of multicolor detector shows unique temperature tuning behavior that was never reported before.     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

非标准色传感器引起的颜色误差分析

本文推导了两种非标准色传感器在测色时引入的误差公式,并对其进行分析。最后通过计算8个样品的颜色对分析结果给于验证。     

超大规模集成电路波导光互连技术的现状与前景

介绍超大规模集成电路(VLSI)波导(?)互连技术的最新进展,并预测其发展方向,以及如阿解决存在的实际问题。