Quantum states in fabricating poly-Si films

The quantum states are presented in these processions of fabricating poly-Si films. Amorphous silicon films prepared by PECVD has been crystallized by conventional furnace annealing (FA) and rapid thermal annealing (RTA), respectively. It is found that the thin films grain size present quantum states with the increasing of the gas flow ratios of SiH₄, H₂ mixture, substrate temperatures, frequency power, annealing temperature and time.     

Monte Carlo simulation of grain growth in polycrystalline materials

Understanding the kinetics of grain growth, under the influence of second phase (such as impurities, voids and bubbles) is fundamental to advances in the control of microstructural evolution. As a precursor to this objective, we have investigated the grain growth kinetics in a polycrystalline material using a standard Q-state Potts’ model under Monte Carlo settings. Based on physical reasoning, new modifications are suggested to circumvent some of the disadvantages in the basic Potts model. The efficacy of these modifications vis-à-vis the basic model is verified. The influence of second phase particles on the impurity loaded grain boundaries is investigated for the study of grain growth kinetics.     

Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel

This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J₅₀₀₀ better than 1.7 T, using hot rolling conditions 40 mm transfer bar thickness, finish mill entry temperature 1000 °C, and finishing temperature 800–840 °C and after decarburization heat treatment and grain growth treatment, was obtained.     

Sm, Pr掺杂CeO2和CeMoO15基固体电解质的结构与性能

采用溶胶凝胶法制备了Sm和Pr掺杂的CeO2和CeMoO15基固体电解质, 通过X射线衍射(XRD)、拉曼光谱(Raman)、场发射扫描电镜(FE-SEM)等手段对氧化物结构进行了分析, 用交流阻抗谱测试了其电性能, 并比较了不同基体及其掺杂体系的结构与电性能. 结果表明, Ce6MoO15基掺杂体系的导电性能高于CeO2基掺杂体系; 元素Mo的加入使Ce6MoO15基材料的晶粒尺寸增大, 晶界相成分减少, 材料的晶界电导率增加, 600 ℃以下材料导电性能明显提高; Pr的掺入减小了材料的晶粒尺寸, 提高了材料的晶界电导率.     

Heterogeneities of grain boundary arrangement in polycrystals

Data on mutual arrangements of different types of grain boundaries in polycrystals are presented. The heterogeneity in grain boundary distribution, namely, the effect of gathering low-angle or special tilt grain boundaries is found in pure aluminum thin films, in sheets of Fe-3% Si alloy and in Al₂O₃ doped with MgO or MgO and Y ₂O₃. The local texture, i.e., formation of colonies or clusters of close-oriented grains is considered as a reason of this heterogeneity. The influences of grain boundary gathering on the transport properties of polycrystals and on the crack propagation are discussed. A new concept of effective grain size is suggested to analyze the relationship between material microstructures and material properties.     

Pressure effect on grain boundary wetting at various temperatures

Bicrystals of Fe-6 at.% Si alloy containing <001> 5 tilt grain boundaries with a deposited zinc layer have been annealed at various hydrostatic pressure at four temperatures between 700° and 905°C. After the anneals the dihedral angle of the grain boundary groove formed at the site of the grain boundary intersection with the solid-melt interphase boundary has been measured. The transition from complete to incomplete wetting of the grain boundary by the zinc-rich melt (dewetting phase transition) has been found to occur as the pressure increased at all temperatures studied. The temperature dependence of the dewetting transition pressure p _w has been determined. That dependence has a minimum at a temperature of 790°C, which is close to the peritectic temperature in the Fe–Zn system (782°C). A thermodynamic analysis of the wetting phenomena in the two-component system, based on Becker's regular solution model for the surface tension of the interphase boundary, explains the minimum in the p _w (T) dependence.     

Mechanical properties of twist grain boundaries in Cu

In a previous paper we studied the Young's and shear modulus of a high-angle twist grain boundary (5) in Cu, using the EAM, and related it to the uniaxial strain derivatives of single crystals. In this paper, we discuss elastic properties of ten additional twist grain boundaries, from 8.8–43.6°. The monolayer Young's modulus at each boundary was calculated and found to be 20–50% higher than the bulk value for all eleven boundaries for both csl and type1 structures. The monolayer shear modulus at each boundary was calculated and found to be 93–98% lower than the bulk value for six grain boundaries with csl structure and found to decrease with increasing twist angle. The critical shear stress was also calculated for eleven boundaries with csl structure and found to roughly decrease with increasing twist angle.     

High pressure studies on new chiral compounds exhibiting TGBA phase

Effects of high pressures on phase sequences of the two homologousn=16 andn=18 of the (3-fluoro-4 ((R) or (S)-methylheptyloxy) 4, (4-fluoro benzoyloxy) tolans) series have been studied. Both compounds exhibit the new twisted Smectic A phase called Twist Grain Boundary TGB_A phase. The high pressure experiments were performed by thermobarometric analysis. The order of the transitions (first or second) have been determined in respect to pressure and temperature. The pressure-temperature phase diagrams show that the TGB_A phase is stabilized by increasing pressure; an inducedN ^* phase appears under high pressure for n=18 leading to the observation of TGB_A-N ^*-I triple point.     

Spray pyrolysis deposition of undoped SnO2 and In2O3 films and their structural properties

In this paper the results of structural analysis of the SnO₂ and In₂O₃ films deposited by spray pyrolysis are presented. The main goals of this analysis are summarizing the results obtained in this field, highlighting a correlation between parameters of film deposition and the material structure and formulating some general regularities, typical for metal oxides. Peculiarities and mechanisms of pyrosol deposition as well as advantages and disadvantages of this technology for deposition of the films with required parameters were also discussed. It is shown that this technology has great potential for controlling structural parameters of metal oxides such as thickness, the grain size, texturing, roughness, the grain faceting and the porosity.     

Sedimentary process inferences from Humic substances analysis and deposition rates (Western Ross Sea,Antarctica)

The first 40?cm of sediment of three basins in the Ross Sea were sampled using a box corer. Site Y1 was located close to the coast in Terra Nova Bay; the sediment of site Y3 was collected in a more distal basin in the central sector of the Ross Sea; finally site Y5 was sampled in the deepest zone of the Joides Basin.

Sediment cores were sliced and analysed with a depth resolution of 2–4.5?cm. The distribution of humic substances and their structural features along the cores were determined and related to the pattern of Total Organic Carbon (TOC) and sedimentological data. The grain size distribution and the ²¹⁰Pb inventories allow the sediment of the study sites to be characterised.

The humic substance content in the sediment decreases, with a change in slope between 23 and 26?cm at Y1, between 12 and 15?cm at Y3 and constant values with further depth. At Y5 the depth profile of humic substance content shows constant values in the upper 17?cm and values decrease with further depth. The pattern of humic substance yield is similar to that found for TOC. The analysis of the elemental composition of the humic acids extracted from different sediment depths shows an increasing C/N atomic ratio at sites Y1 and Y3 and constant values along the Y5 core. The depth profile of the C/N atomic ratio is confirmed by the changes observed in the structural characterisation and indicates a shift from the freshly deposited organic matter on the sediment surface to more humified material (humin). The results obtained highlight a different sedimentation rate at the three sites as deduced from sedimentological analysis.