Al3Ti1B1RE细化剂对罐用铝材的细化效果及稀土的作用

采用XRD，OM，SEM，EDAX等探讨了一种新型Al3Ti1B1RE中间合金细化剂对罐用铝材的细化效果及RE的作用。结果表明，该细化剂对罐用铝材的细化效果优于进口和国产Al3Ti1B，且具有长效性，达6h后仍未见明显衰退，明显提高了该材料的强度和塑性；其细化效果及稳定性好的主要原因是：RE可降低铝液的表面能，增加铝液对细化核心(如TiAl3，TiB2)的润湿性，既充分发挥了异质形核作用，又防止了TiB2聚集沉淀倾向；RE也极易在结晶前沿富集造成成分过冷，阻碍了α-Al晶粒生长，并促进其在细化核心上形核；此外RE还兼有一定的净化、细化和变质作用，尤其是净化作用提高了该细化剂的冶金质量。     

稀土与含硫有机配体配合物的研究 Ⅳ.轻稀土元素与3-苯基-5-(呋喃-2)吡唑啉二硫代甲酸固体配合物的合成及性质

吡唑啉类化合物具有杀菌特性和植物生长调节作用,3-苯基-5-(呋喃-2)吡唑啉二硫代甲酸盐能与许多过渡金属离子形成稳定的配合物。而与稀土的配合物尚未报道。为考察稀土与含硫有机配体形成配合物的条件及该配合物的性质,我们在非水体系和保护气氛     

纳米级NiTiO3粉体的合成

以Ｈ２ＴｉＯ３，Ｈ２Ｏ２及ＮｉＣｌ２为主要原料，用化学共沉淀法制备了纳米级ＮｉＴｉＯ３。确定了反应物Ｈ２ＴｉＯ３，Ｈ２Ｏ２，ＮＨ３的最佳摩尔比为１：８：２，用不同的退火温度和退火时间对样品处理得到相应粒径的纳米级粉体。     

2-取代亚肼基-1,3-二硫杂环戊烷类化合物的合成及其生物活性研究

以取代苯甲醛、取代吡啶和取代苯甲酸酯等为原料合成了 10种含硫杂环化合物 (其中 2a～ 2g化合物为国内外未见报道 ) .在合成过程中采用了超声波技术 ,极大地缩短了反应时间 ,提高了收率 .所得化合物的结构经IR ,1 HNMR ,MS和元素分析证实 .对其生物活性进行了初步测试 ,结果证明一些化合物具有良好的抑菌或杀菌作用 ,其中 2b ,2c ,2e ,2h ,2i和2j对大肠杆菌 ( 10 40 7号 )的抗菌效果与CET和SMZ相当 ;2b ,2c ,2f对草绿色链球菌 ( 112 3号 )的抗菌效果与CET和SMZ相当 .     

植物纤维及其提取物增强聚合物的3D打印成型研究

3D打印技术作为新型成型技术,近年来受到了巨大的关注,但常见的PLA、ABS等单体打印耗材由于其自身的不同缺点,限制了其进一步的应用。本文综述了植物纤维及其提取物增强聚合物复合材料在3D打印领域的应用研究进展,重点阐述了木纤维、竹纤维,秸秆纤维等常见植物纤维用于3D打印的研究现状,还介绍了纤维素、木质素、半纤维素等植物纤维提取物增强聚合物用于3D打印的研究情况。同时对植物纤维/聚合物材料存在的一些问题及改性方法进行了分析与展望。     

Synthesis and Antibacterial Activities of 4-Amino-3-(1-aryl-5-methyl-1,2,3-triazol-4-yl)-5-mercapto-1,2,4-triazoles/2-Amino-5-(1-aryl-5-methyl-1,2,3-triazol-4-yl)-1,3,4-thiadiazoles and Their Derivatives

ＩｎｔｒｏｄｕｃｔｉｏｎＳｃｈｉｆｆｂａｓｅｓ ,ａｍｉｄｅｓ ,ｉｍｉｄａｚｏｌｏ[2 ,1 ｂ] 1,3,4 ｔｈｉａｄｉａｚｏｌｅｓ,ａｎｄ 7Ｈ ｓ ｔｒｉａｚｏｌｏ[3,4 ｂ] 1,3,4 ｔｈｉａｄｉ ａｚｉｎｅｓｃｏｎｔａｉｎｉｎｇｈｅｔｅｒｏｃｙｃｌｅｓｈａｖｅｂｅｅｎａｔｔｒａｃｔｉｎｇｍｕｃｈａｔｔｅｎｔｉｏｎａｓｐｏｔｅｎｔｉａｌａｎｔｉｆｕｎｇａｌａｇｅｎｔｓ .1 51,2 ,3 ｔｒｉａ ｚｏｌｅ ,6 7ｍｅｒｃａｐｔｏ 1,2 ,4 ｔｒｉａｚｏｌｅ ,81,3,4 ｔｈｉａｄｉａｚｏｌｅ9 10ａｎｄｔｈｅｉｒｒｅｌａｔｅｄｃｏ…     

New far infrared laser lines obtained by optically pumping13CD3OD

We have obtained laser action on 34 far infrared lines for the first time in fully deuterated methyl alcohol with the¹³C isotope (¹³CD₃OD), and we have measured the frequency of 13 lines. The molecule was pumped by a cw CO₂ laser. We have measured the wavelength, the relative polarization, the relative intensity of most lines, the frequency, and the CO₂ pump frequency offset of the strongest lines. The new lines are distributed in the wavelength region from 75.27 m to 464.7 m.Supported in part by a joint grant with the U.S. National Science Foundation grant # INT 80-19014 and the Brazilian Conselho Nacional de Pesquisas (CNPq).     

4-Hydroxy-2-quinolones 113. Synthesis and antitubercular activity of N-R-amides of 4-hydroxy-6-methyl-2-oxo-1-propyl-1,2,5,6,7,8-hexahydroquinoline-3-carboxylic acid

A preparative method has been developed and the synthesis has been effected of anilides and heterylamides of 4-hydroxy-6-methyl-2-oxo-1-propyl-1,2,5,6,7,8-hexahydroquinoline-3-carboxylic acid. A comparative analysis has been carried out of the structure and antitubercular properties of the synthesized compounds and their analogs unsubstituted in the quinoline nucleus. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 405–414, March, 2007.     

Influence of the heating conditions on the thermal and chemical behaviour of solid particles undergoing a fast endothermic decomposition

This paper deals with models describing the thermal and chemical behaviour of solid particles undergoing fast endothermic reactions under the influence of an external heat flux. The heat source temperature is supposed to be constant, to increase with time, or to deliver a simple thermal flash. It is shown that the pyrolysis conditions (reaction temperature, conversion, etc.) depend on the chemical characteristics of the reaction and also to a large extent on the external heating conditions. Relationships are proposed to take into account these parameters. The results are applied to the thermal decomposition of NaHCO₃. The pyrolysis of cellulose is finally chosen in order to show how these operating parameters can also affect the selectivity of a more complex reaction.     

搅拌釜中制备草酸铈的团聚尺寸模型研究

以硝酸铈和草酸铵反应生成草酸铈沉淀为研究对象，探讨了搅拌釜中输入功率、溶液过饱和度与产物团聚尺寸之间的变化关系并在团聚和破碎动力学的基础上建立了团聚尺寸模型。根据草酸铈沉淀实验中得到的实验结果求得了一定反应体系浓度下的模型K1，K2和K3值，最后通过－↑LtE,max的模型计算值与实验值，ε--↑LtE的模型曲线与实验曲线的比较初步证明了该模型的实际适用性。