Anomalous capacitance of quantum well double-barrier diodes

The S-parameters of several different quantum well double barrier diodes have been measured. A technique has been developed for measuring whisker contacted diodes with and HP 8510B automatic network analyzer. Special coaxial mounts using K-connectors were designed to enable measurements up to 20 GHz. The voltage-dependent conductance and capacitance were derived from the measured reflection coefficient of each device. The C/V characteristics were observed to exhibit an anomalous increase at voltages corresponding the the negative differential resistance region (NDR). These are the first reported S-parameter measurements in the negative differential resistance region of quantum well double barrier diodes. A theory is presented that explains, in part, the observed results.     

Spatial decay in a double diffusive convection problem in Darcy flow

This paper deals with a model of time-dependent double diffusive convection in Darcy flow. In particular it is concerned with the spatial decay of solutions when the flow is confined to a semi-infinite cylinder. Decay bounds for an energy expression are derived.     

高功率双包层光纤激光器受激拉曼散射和热效应的理论研究

 受激拉曼散射和热效应会限制光纤激光器功率的提高。利用高功率光纤激光器的速率方程和热传导方程，理论研究了双端泵浦和分布泵浦下双包层光纤激光器的受激拉曼散射和热效应，得到了光纤中的泵浦光、激光和斯托克斯光的功率分布，光纤激光器的输出特性以及光纤中的温度分布。分析表明，当泵浦功率增大到一定值时，光纤激光器中出现SRS，一部分激光功率会转移给斯托克斯光，影响激光功率进一步提高;与双端泵浦方式相比，分布泵浦下光纤激光器的斜率效率和最大输出功率相差不大，但是，光纤中的温度分布被有效地降低，因此，分布泵浦方式更为有效。     

Features of the total disintegration events of heavyemulsion targets caused by 4.5A GeV/c16O

Total disintegration events produced by 4.5\,A GeV/c $^{16}$O--AgBr interactions are analysed to investigate the characteristics of secondary charged particles produced in such collisions. The multiplicity distributions of grey, black, and relativistic charged particles can be well represented by Gaussian distribution. The average multiplicity of grey particles is found to increase with the mass of projectile increasing, while that of black particles is found to decrease with the mass of projectile increasing. This result is in good agreement with the prediction of fireball model. Finally, the linear dependence between grey and black particles is observed, but there is no distinct dependence between the production of relativistic charged particles and the target excitation.     

银盐干板的皱缩控制及其在彩色反射全息上的应用

分析了影响全息干板银盐乳胶在处理过程中收缩的几个因素，并通过实验，找出了在拍摄及处理体积反射全息图过程中，曝光量、漂白液温度及脱水的方式对乳胶收缩影响的规律.在此基础上提出控制乳胶的收缩，即控制反射全息图衍射波长的方法，从而达到彩色反射全息图的实现.实验结果表明该方法做出的全息图效果良好.     

一种区间数的因子分析技术及其在证券市场中的应用

传统的因子分析技术能够有效地对高维变量空间进行降维处理,但它对于样本空间却缺乏行之有效的降维效果.为了解决这一问题,一种针对大量样本数据、新的因子分析技术———区间数因子分析技术(intervaldatafactoranalysis,IFA)被提出并得到了迅速的发展。IFA方法对传统的数据概念做了本质性的扩张,运用'数据打包'的理念,对海量原始数据在不破坏其原有内在逻辑关系的前提下,可以进行变量和样本点维度的双重降维。本文详细阐述了区间数因子分析技术的原理,并以中国股票市场为案例研究背景,结果表明IFA分析技术对大规模多维数据系统做综合简化是十分有效的。     

三组元乳化液雾化特性的研究

采用Malvern粒度仪对柴油、甲醇和水三组元乳化液的雾化特性进行了研究。实验发现:对于压力雾化喷嘴来说,本文所涉及的乳化液由于粘度高于纯柴油,因此雾化效果比纯柴油差,而且喷射压力、乳化剂的粘度和乳化液的组份对乳化液的雾化特性具有显著的影响。随着喷射压力的升高,乳化液喷雾粒径将随之减小;若乳化液中柴油的含量(柴油不少于50％)降低,乳化液的雾化粒径将随之增加;若采用高粘度的乳化剂,相应乳化液喷雾的粒径也大。     

Almost strongly regular matrices and a core theorem for double sequences

The idea of almost convergence for double sequences was introduced by Moricz and Rhoades [Math. Proc. Cambridge Philos. Soc. 104 (1988) 283-294] and they also characterized the four dimensional strong regular matrices. In this paper we define and characterize the almost strongly regular matrices for double sequences and apply these matrices to establish a core theorem.     

Block copolymers of acrylic acid and butyl acrylate prepared by reversible addition–fragmentation chain transfer polymerization: Synthesis,characterization, and use in emulsion polymerization

Amphiphilic block copolymers of poly(acrylic acid‐b‐butyl acrylate) were prepared by reversible addition–fragmentation chain transfer polymerization in a one‐pot reaction. These copolymers were characterized by NMR, static and dynamic light scattering, tensiometry, and size exclusion chromatography. The aggregation characteristics of the copolymers corresponded to those theoretically predicted for a star micelle. In a butyl acrylate and methyl methacrylate emulsion polymerization, low amounts of these copolymers could stabilize latices with solid contents up to 50%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 684–698, 2003     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003