Temperature-controlled combustion and kinetics of different rank coal samples

Differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG) has been used to obtain information on the temperature-controlled combustion characteristics of seventeen coals of different origin from Thrace basin of Turkey. Experiments were performed in air atmosphere up to 600°C at a heating rate of 10°C min^-1. The DSC/TG curves clearly demonstrate distinct transitional stages in the entire coal samples studied. Reaction intervals, peak and burn-out temperatures of the coal samples are also determined. Two different kinetic methods known as, Arrhenius and Coats-Redfern, were used to analyze the kinetic data and the results are discussed.     

硬木热解过程中颗粒内部二次反应的数值研究Ⅱ.数值模拟结果

为了研究生物质（硬木）热解过程中颗粒内部的二次反应，对流化床环境下单颗粒生物质热解模型进行了求解。计算针对典型大颗粒和典型小颗粒在流化床反应器反应条件下的热解过程，对不同大小颗粒内部各种产物的生成、消耗、积累以及逃逸行为进行了定量描述。计算结果表明：对于直径为2mm的小颗粒，颗粒内二次裂解的份额可以忽略，但是对于直径10mm的大颗粒，热争过程中有超过20%的一次焦油参加了颗粒内部二次反应，颗粒内二次裂解显著地改变了热解产物分布，改变了热解产物的品质。     

压力和温度对4-甲基二苯并噻吩和二苯并噻吩加氢脱硫反应的影响

研究了4-甲基二苯并噻吩(4-MDBT)和二苯并噻吩(DBT)在CoMo/γ-Al2O3上的加氢脱硫反应产物分布及其可能的反应网络,通过反应压力和温度对产物分布影响的研究,揭示了加氢脱硫反应的可能机理。研究发现4-MDBT在CoMo/γ-Al2O3上的加氢脱硫反应主要通过直接氢解路径和加氢路径进行,且两者反应速率相当；DBT在 CoMo/γ-Al2O3上的加氢脱硫反应主要通过直接氢解路径进行。4-MDBT分子位于4位的甲基阻碍其在催化剂表面通过硫原子的端连吸附,从而降低了其直接氢解脱硫路径的反应速率,因而也降低了其总的加氢脱硫转化率。反应压力降低,DBT和4-MDBT加氢脱硫反应中加氢路径反应速率明显下降,而其对氢解路径影响较小,但效果却与加氢路径相反,反应压力对4-MDBT转化率的影响大于DBT。反应温度对DBT和4-MDBT加氢脱硫反应中加氢路径和氢解路径都有明显影响,但是对DBT加氢脱硫反应中氢解路径的影响小于加氢路径,而对4-MDBT加氢脱硫反应中氢解路径的影响稍高于加氢路径,4-MDBT分子中甲基的供电子作用有利于相连苯环的加氢反应。     

5-芳胺-4,7-吲唑二酮的合成

以1,4-对醌、芳肼为原料,通过Aza-Nenitzescu反应、氧化银氧化得到吲唑醌,亲核试剂(各种芳香胺)在Ce3 催化下与吲唑醌发生迈克尔加成反应,得到一系列5-芳氨基基取代的吲唑醌.化合物结构经元素分析、IR及1H NMR证实.初步的生理活性研究表明,这些化合物具有良好的抗哮喘活性.     

分子CH_3NH=B:的结构及重排反应的理论研究

采用量子化学中的从头计算方法, 在MP2/6-31G(d,p)水平上研究了不饱和硼烯CH3NH=B:的结构及重排反应机理。结果表明, CH3NH=B:的单线态结构比三线态结构稳定, 该分子的基态是单线态。分子CH3NH=B:可以发生3种不同的重排反应。本文找到了这3种重排反应的过渡态, 并详细计算了不饱和硼烯CH3NH=B:重排反应的动力学函数, 据此讨论了不饱和硼烯CH3NH=B:的稳定性问题。     

Halogenated arenes in the Duff reaction at high pressures

The reaction of fluorobenzene with urotropine in trifluoroacetic acid (TFAA) at high pressures and temperatures affords predominantly fluorobenzaldehydes andN-(fluorophenylmethyl)trifluoroacetamides. The yields of these products depend considerably on the reaction conditions. The rates of their formation have the maximum values at the momemt of the phase transition (PT) of TFAA. A new efficient cyclic (dynamic) regime is proposed for the synthesis at high pressures. The regime involves periodically occurring PT of the solvent. The change in the relative rate of product formation with the degree of fluorobenzene conversion is wave-like.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 319–323, February, 1995.     

Cl+C2H6→HCl+C2H5反应的准经典轨线研究

用三原子模型的准经典轨线方法研究了Ｃｌ与Ｃ２Ｈ６（ｖ＝０，ｊ）的反应。计算结果表明，反应产物ＨＣｌ的角度分布基本上为各向同性，其振动分布处于基态，与实验结果相一致。对反应轨线的研究表明，该反应为一直接反应，而且反应碰撞在低及高的碰撞参数下的机理不一样，在低碰撞参数下反应碰撞是直接完成的，产物ＨＣｌ以向后散射为主，转动基本上是冷的，但比高碰撞参数下的热。在高的碰撞参数下则生成短寿命的碰撞复合物，产物     

Synthesis and Crystal Structur of (4,4''-H2bipy)[CdBr4]·H2O

The title compound (4,4'-H2bipy)[CdBr4]·H2O 1 has been synthesized via hydrothermal reaction and characterized by X-ray diffraction. The crystal belongs to monoelinic,space group P21/c with a=8.260(3), b=23.926(7), c=9.774(2) (A), β=106.777(9)°,C10H12Br4CdN2O, Mr=608.26, V=1849.4(9)(A)3, Z=4, Dc=2.185 g/cm3, S=1.005, μ(MoKα)=9.814 mm-1, F(000)=1128, R=0.0646 and wR=0.0989. The crystal structure analysis of 1reveals that the title compound features an isolated structure, based on discrete 4,4'-H2bipy moieties and lattice water molecules which are linked by hydrogen bonds together with tetrahedral cadmium atoms terminally coordinated by four bromine atoms.     

Soluble and polymer-supported 2- and 3-benzylated furans for the preparation of α,β-ethylenic carbonyl compounds

Soluble and polymer-supported 2- and 3-benzylated furans were subjected to a sequence involving a Diels-Alder reaction with α,β-acetylenic carbonyl compounds, a Michael addition, and a subsequent retro-Diels-Alder reaction to yield olefinic compounds. On solid support, this traceless strategy is advantageous since pure compounds were released in the thermal cycloreversion step. The fur-2-ylated resin allowed a highly diastereoselective synthesis.     

A sequential reaction process to assemble polysubstituted indolizidines, quinolizidines and quinolizidine analogues

The ω-iodo-α,β-alkynoates and their ketone, sulfone or phosphonate analogues react with δ-chloropropylamines in MeCN assisted with K₂CO₃ to undergo a sequential S_N2/Michael addition/S_N2/S_N2 reaction process, giving polysubstituted indolizidines or quinolizidines in good to excellent yields. This sequential reaction process is also compatible with three other substituted α,β-alkynoates, affording quinolizidine analogues in moderate to good yields.