受限空间油气爆燃火焰形态

通过受限空间油气爆燃可视化实验发现，在不同初始油气体积分数下，爆燃火焰呈现出不同的表观特征，据此提出了受限空间油气爆燃的3种火焰形态，即光滑球形火焰、褶皱球形火焰和卷曲絮状火焰。分析了3种火焰形态的形成机理，并通过实验观测与理论分析，给出了区分3种火焰形态的临界条件。结合实验中采集到的关键参数，总结了不同的火焰形态下受限空间油气爆燃的反应产物、最大压力、升压速率、反应时间、火焰强度等关键参数的特征与变化规律。     

Deposition pattern of drying droplets

The drying of liquid droplets is a common daily life phenomenon that has long held a special interest in scientific research. When the droplet includes nonvolatile solutes, the evaporation of the solvent induces rich deposition patterns of solutes on the substrate. Understanding the formation mechanism of these patterns has important ramifications for technical applications,ranging from coating to inkjet printing to disease detection. This topical review addresses the development of physical understanding of tailoring the specific ring-like deposition patterns of drying droplets. We start with a brief introduction of the experimental techniques that are developed to control these patterns of sessile droplets. We then summarize the development of the corresponding theory. Particular attention herein is focused on advances and issues related to applying the Onsager variational principle (OVP) theory to the study of the deposition patterns of drying droplets. The main obstacle to conventional theory is the requirement of complex numerical solutions, but fortunately there has been recent groundbreaking progress due to the OVP theory. The advantage of the OVP theory is that it can be used as an approximation tool to reduce the high-order conventional hydrodynamic equations to first-order evolution equations,facilitating the analysis of soft matter dynamic problems. As such, OVP theory is now well poised to become a theory of choice for predicting deposition patterns of drying droplets.     

Sonocatalytic degradation of Acid Blue 92 using sonochemically prepared samarium doped zinc oxide nanostructures

Pure and Sm-doped ZnO nanoparticles were synthesized applying a simple sonochemical method. The nanocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) techniques which confirmed the successful synthesis of the doped sonocatalyst. The sonocatalytic degradation of Acid Blue 92 (AB92), a model azo dye, was more than that with sonolysis alone. The 6% Sm-doped ZnO nanoparticles had a band gap of 2.8 eV and demonstrated the highest activity. The degradation efficiency (DE%) of sonolysis and sonocatalysis with undoped ZnO and 6% Sm-doped ZnO was 45.73%, 63.9%, and 90.10%, after 150 min of treatment, respectively. Sonocatalytic degradation of AB92 is enhanced with increasing the dopant amount and catalyst dosage and with decreasing the initial AB29 concentration. DE% declines with the addition of radical scavengers such as chloride, carbonate, sulfate, and tert-butanol. However, the addition of enhancers including potassium periodates, peroxydisulfate, and hydrogen peroxide improves DE% by producing more free radicals. The results show adequate reusability of the doped sonocatalyst. Degradation intermediates were recognized by gas chromatography–mass spectrometry (GC–MS). Using nonlinear regression analysis, an empirical kinetic model was developed to estimate the pseudo-first-order constants (k_app) as a function of the main operational parameters, including the initial dye concentration, sonocatalyst dosage, and ultrasonic power.     

Multidimensional space groups: Tables and standards

The previous speakers have dealt with tangible physical objects; I am to deal with organizational and symbolic problems. The symbolic problems are of greater scientific importance, but I must begin with those of human organization and in particular with the structure of the International Union of Crystallography (acronym IUCr).     

Degradation effects in the extraction of antioxidants from birch bark using water at elevated temperature and pressure

Experiments with birch bark samples have been carried to enable a distinction between extraction and degradation effects during pressurised hot water extraction. Two samples, E80 and E180, contained birch bark extracts obtained after extraction at 80 and 180 °C for up to 45 min, respectively. Two other samples, P80 and P180, were only extracted for 5 min at the two temperatures and were thereafter filtered and hydrothermally treated at 80 and 180 °C, respectively. During the latter treatment, samples were collected at different times to assess the stability of the extracted compounds. An offline DPPH (2,2-diphenyl-1-picrylhydrazyl) assay, as well as a high performance liquid chromatographic separation coupled to an electrochemical detector, were used to determine the antioxidant capacity of the processed samples. The results obtained with the different techniques were compared to assess the yield of the extraction and degradation processes. In addition, an online hyphenated system comprising high performance liquid chromatography coupled to diode-array; electrochemical; and tandem mass spectrometric detection (HPLC-DAD-ECD-MS/MS) was used to study the compositions of the extracts in more detail. The results for the samples processed at 80 °C showed that the extraction reached a steady-state already after 5 min, and that the extracted compounds were stable throughout the entire extraction process. Processing at 180 °C, on the other hand, gave rise to partly degraded extracts with a multitude of peaks in both the diode array and electrochemical detectors, and a higher antioxidant capacity compared to for the extracts obtained at 80 °C. It is concluded that HPLC-DAD-ECD is a more appropriate technique for the determination of antioxidants than the DPPH assay. The mass spectrometric results indicate that one of the extracted antioxidants, catechin, was isomerised to its diastereoisomers; (+)-catechin, (−)-catechin, (+)-epicatechin, and (−)-epicatechin.     

Phase retrieval from fringe pattern with 1-D discrete wavelet transform

This paper proposes a novel method to obtain frequency modulation (FM) signals from a single fringe pattern for phase retrieval. First, a 1D discrete Meyer wavelet is employed to decompose the pattern image signal row by row and the soft-thresholding approach is applied to remove noise. The low frequency coefficients of the wavelet decomposition are then set to 0, and the signal is reconstructed. Moreover, the optimal wavelet decomposition level is adaptively determined using a cost function-based method. The reconstructed signal, which no longer contains a background component, is normalized using a nonlinear and piecewise normalization method. The proposed method is faster and more accurate than some other phase retrieval approaches, which is illustrated with two test cases.     

Gaussian pre-filtering for uncertainty minimization in digital image correlation using numerically-designed speckle patterns

This paper discusses the effect of pre-processing image blurring on the uncertainty of two-dimensional digital image correlation (DIC) measurements for the specific case of numerically-designed speckle patterns having particles with well-defined and consistent shape, size and spacing. Such patterns are more suitable for large measurement surfaces on large-scale specimens than traditional spray-painted random patterns without well-defined particles. The methodology consists of numerical simulations where Gaussian digital filters with varying standard deviation are applied to a reference speckle pattern. To simplify the pattern application process for large areas and increase contrast to reduce measurement uncertainty, the speckle shape, mean size and on-center spacing were selected to be representative of numerically-designed patterns that can be applied on large surfaces through different techniques (e.g., spray-painting through stencils). Such “designer patterns” are characterized by well-defined regions of non-zero frequency content and non-zero peaks, and are fundamentally different from typical spray-painted patterns whose frequency content exhibits near-zero peaks. The effect of blurring filters is examined for constant, linear, quadratic and cubic displacement fields. Maximum strains between ±250 and ±20,000 µε are simulated, thus covering a relevant range for structural materials subjected to service and ultimate stresses. The robustness of the simulation procedure is verified experimentally using a physical speckle pattern subjected to constant displacements. The stability of the relation between standard deviation of the Gaussian filter and measurement uncertainty is assessed for linear displacement fields at varying image noise levels, subset size, and frequency content of the speckle pattern. It is shown that bias error as well as measurement uncertainty are minimized through Gaussian pre-filtering. This finding does not apply to typical spray-painted patterns without well-defined particles, for which image blurring is only beneficial in reducing bias errors.     

Sulfur-Containing Vinyl Monomers. XV. Kinetic Study of Radical Polymerization of Vinyl Mercaptobenzothiazole and Its Copolymerization

A kinetic study of radical polymerization of vinyl mercaptobenzothiazole (VMBT) with α,α′-azobisisobutyonitrile (AIBN) at 60°C was carried out. The rate of polymerization (R_p) was found to be expressed by the rate equation: R_p = k[AIBN]^0.5 [VMBT]^1.0, indicating that the polymerization of this monomer proceeds via an ordinary radical mechanism. The apparent activation energy for overall polymerization was calculated to be 20.9 kcal/mole. Moreover, this monomer was copolymerized with methyl methacrylate, acrylonitrile, vinyl acetate, phenyl vinyl sulfide, maleic anhydride, and fumaronitrile at 60°C. From the results obtained, the copolymerization parameters were determined and discussed.     

Biochemical study for the effect of henna (Lawsonia inermis) on Escherichia coli

Leaf samples of Lawsonia inermis (Li) were examined for their antimicrobial potential. Broth extracts in different concentrations were prepared and bioassayed in vitro for the growth of Escherichia coli. The growth of E. coli pathogen was inhibited to various degrees by increasing the concentration of the herbal powder. In addition to the observed alterations which were detected electrophoretically in the protein pattern, were activities of the amylase enzyme and glycoprotein fractions. The protein pattern has one common band of Rf 0.47 and two characteristic bands of Rf 0.36 and Rf 0.42 for E. coli sample. The quantitative mutation was observed in the bacteria with different concentrations of L. inermis compared with the control. Some types of proteins in E. coli completely disappeared upon being S.I affected. The amylase pattern showed one common band with Rf 0.037 and two characteristic bands with Rf 0.18 and Rf 0.37 for E. coli sample. The obvious quantitative mutation observed in bacteria with different concentrations of L. inermis compared with E. coli. The glycoprotein pattern recorded one common band at R₁ with Rf 0.94 for E. coli sample and bacteria inoculated with different concentrations of L. inermis. These results confirmed the antibacterial activity of henna leaves and supported the traditional use of the plant in therapy of bacterial infections and disturbances that occurred at the biochemical level. The broth extract of the L. inermis leaves showed obvious antibacterial activity against E. coli.     

Unsaturated polyester resins modified with phosphorus-containing groups: Effects on thermal properties and flammability

A novel reactive phosphorus-containing monomer [1-oxo-2,6,7-trioxa-1- phosphabicyclo-[2.2.2]octane-methyl diallyl phosphate, PDAP] was synthesized, and various amounts of PDAP were combined with unsaturated polyester by radical bulk polymerization. The resulting flame-retardant unsaturated polyester resin (FR-UPR) samples were investigated by thermogravimetric analysis (TGA), microscale combustion calorimetry (MCC), and limiting oxygen index (LOI) tests. Due to the relatively high phosphorus content of PDAP (18.2 wt%), incorporation of this monomer into unsaturated polyester resin (UPR) led to a marked decrease in the heat release capacity (HRC), the total heat release (THR), an increase in the LOI and the char yield upon combustion. In order to elaborate the interactions between the UPR and PDAP in degradation, differences between the experimental and theoretical mass losses of a FR-UPR sample were evaluated. Furthermore, thermogravimetry-Fourier transform infrared (TG-FTIR) and real-time Fourier transform infrared (RTIR) spectroscopy were employed to investigate the degradation behavior of UPRs, providing insight into the degradation mechanism.