Fe(0)催化三氯乙酸烯丙酯的环化反应研究

通过对Fe(O)催化烯烃自由基环化反应的研究，发现以Fe(O)为催化剂催化三氯 乙酸烯丙酯分子内自由基环化反应可以高化学选择性得到五元环内酯产物，反应中 不需加入配体。和大多数自由基反应一样，反应温度与催化剂用量对该反应的转化 率和产率有着很大的影响。     

燃烧催化剂中LaAlO3作为第2载体的研究

在载体堇青石表面涂覆一层LaAlO3作为第二载体，用浸渍法制备负载型LaMnO3、LaCoO3等钙钛矿型燃烧催化剂时，发现能促进LaMnO3等活性相的生长，从而提高了二甲苯完全氧化的催化活性；对于负载型LaCo3O3催化剂，可避免因用γ－Al2O35作第二载体而生成的低活性CoAl2O4类尖晶石相，因而有利于提高催化剂的耐热性。     

水/有机两相体系中催化氧化反应的研究进展

论述了水／有机两相体系中催化氧化反应的一些最新进展。由于采用水溶性催化剂，使得水／有机两相体系中的催化反应具有催化剂与产物容易分离的优点。阐述了水溶性催化剂在催化氧化反应中的应用，列举了一些典型的水溶性配体、水溶性催化剂以及催化氧化反应实例。参考文献21篇。     

固相萃取-气相色谱-质谱联用法测定水中的硝基苯类有机污染物的分析方法研究

建立了固相萃取、毛细柱气相色谱-质谱、内标标准曲线法使用选择离子(SIM)监测采集数据定量分析水中硝基苯类有机化合物的分析方法.通过对固相萃取柱的选择、固相萃取条件(样品溶液的pH、上样速率、上样体积、洗脱液选择及配比)的优化,得出了最佳实验条件.始漏体积达1.5 L.回收率大于80%.检出限为0.015～0.045 μg/L.RSD在1.1%～5.9%之间.     

壳聚糖表面修饰的SiO2负载Ni-B非晶态合金的制备及催化性能

以壳聚糖(CS)对SiO2进行表面修饰, 采用浸渍还原法制备了负载型Ni-B非晶态合金催化剂(Ni-B/CS/SiO2), 并采用XRD、FTIR、电感耦合等离子体发射光谱(ICP)、BET、XPS、TEM、SAED等表征方法研究了催化剂的非晶性质、原子组成、尺寸分布及粒径大小等. 考察了催化剂对糠醇加氢制四氢糠醇反应的催化性能, 并与没有壳聚糖修饰的Ni-B/SiO2催化剂及Raney Ni催化剂进行了对比. 结果表明, 加入壳聚糖制得的Ni-B/CS/SiO2催化剂的活性组分Ni-B团簇粒径更小, 表面活性组分浓度更高, 催化活性更高.     

The isolation, structural determination, and total synthesis of terfestatin A, a novel auxin signaling inhibitor from Streptomyces sp.

Indole 3-acetic acid, a plant hormone auxin, regulates every aspects of plant growth and development. In the screening for specific inhibitors on auxin signaling using the transgenic Arabidopsis plant harboring the auxin-responsive reporter gene, terfestain A was found to be a novel inhibitor of auxin signaling from the culture of Streptomyces sp. F40. The structure of terfestatin A was determined to be p-terphenyl β-glucoside on the basis of spectroscopic analyses, chemical degradation, and total synthesis.     

分子筛体系的氢溢出效应

分子筛体系的氢溢出效应李晓燕，盛太成，杨孔章（山东大学化学院，济南２５０１００）关键词铂／分子筛催化剂，氢溢出，程序升温脱附负载型金属催化剂的表面氢溢出效应近年来引起了人们的重视．人们采用不同的实验方法对此进行了广泛的研究，但对以分子筛为担体的负载型...     

Synthesis and fluorination of nitro-substituted thionocarbonates

Thiocarbonylchloride reacts with -nitroalcohols yielding symmetrical thionocarbonates. Transesterification of bis(2-fluoro-2,2-dinitroethyl)thioncarbonate affords alkyl 2-fluoro-2,2-dinitroethylthionocarbonates. Fluorination of these thionocarbonates yields the corresponding difluoroformals.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 375–376, February, 1993.     

Influence of two grinding methods on the uncertainty of determinations of heavy metals in atomic absorption spectrometry/electrothermal atomisation of plant samples

 Chemical analyses of trace elements are affected by relatively high analytical errors due to the different steps of the laboratory procedures: samples grinding, mineralisation and instrumental measurements. In the present communication, the influence of the grinding phase on the global uncertainty of Pb, Cd, Ni and Cr determinations in plant samples by the classical method of atomic absorption spectrometry/electrothermal atomisation (AAS-ETA) after dry ashing is quantified. Two grinding machines, a planetary mill with balls and jars of agate versus a stainless steel grinder were compared by analysing leaf samples of cucumber, strawberry, kiwivines, apple trees and grapevines from agricultural experimental plots under controlled conditions. Variance components due to the difference between grinding methods and experimental plots were estimated. Further, the simultaneous effects of the grinding methods on all considered metals have been evaluated by analysis of variance. With the stainless steel grinder, on average, higher levels of the considered heavy metals were obtained (up to 67% of the mean values). On average, the increments were similar for metals contained in steel (Ni and Cr) and those not contained (Pb and Cd). The true causes of these differences need further investigation to determine whether the higher metal detection is due to possible contamination, to a different grinding quality or to other reasons. Finally, the grinding methods did not seem to affect the combined uncertainty of the analyses. Received: 3 November 1997 · Accepted: 29 November 1997     

Conversion ofn-hexane over Pt?Sn/γ-Al2O3 catalyst

Conversion ofn-hexane has been applied as a test reaction to study differences between the series of Pt−Sn/γ-Al₂O₃ catalysts obtainedvia different methods of preparation. Preliminary results of catalytic experiments have been compared with some changes occurring on the catalysts surfaces as the results of the preparation technique applied. It has been found that catalysts with the second metal (Sn) introduced to the support by the coprecipitation technique were much more stable in comparison to the catalysts where the tin component has been added by the impregnation method, however, we have not observed large differences in catalytic activity.