Use of the internal standardization for difficult sampling by graphite furnace atomic absorption spectrometry

This work shows the potentiality of As as internal standard to compensate errors from sampling of sparkling drinking water samples in the determination of selenium by graphite furnace atomic absorption spectrometry. The mixture Pd(NO₃)₂/Mg(NO₃)₂ was used as chemical modifier. All samples and reference solutions were automatically spiked with 500 μg l⁻¹ As and 0.2% (v/v) HNO₃ by the autosampler, eliminating the need for manual dilutions. For 10 μl dispensed sample into the graphite tube, a good correlation (r=0.9996) was obtained between the ratio of analyte absorbance by the internal standard absorbance and the analyte concentrations. The relative standard deviations (R.S.D.) of measurements varied from 0.05 to 2% and from 1.9 to 5% (n=12) with and without internal standardization, respectively. The limit of detection (LD) based on integrated absorbance was 3.0 μg l⁻¹ Se. Recoveries in the 94-109% range for Se spiked samples were obtained. Internal standardization (IS) improved the repeatability of measurements and increased the lifetime of the graphite tube in ca. 15%.     

钒、铬、锰磷桥络合物中31P NMR化学位移的研究

ISSIe山和W6flSChllh山子1960年首次用pdCI。和二苯基磷合成出黄色的二聚络合物，后被H。yieY＊确认为具有pRZ的桥式结构．此后一系列该类结构的化合物被合成并引起了广泛的兴趣．磷可以和两个甚至多个金属原子络合构成多核金属络合物，在催化反应中有重要应用．磷原子存在多种电子态，其3d空轨道也能参与成键．P乃1的NMR谱是研究含磷化合物立体结构的有力工具．P－31与其它核素之间的耦合常数以及P－31的化学位移对阐明化合物的立体构象以及电子结构具有重要作用．近年来，West饲用计算机神经网络技术预测P－：if的化学位移，但仅…     

原油溶胶-凝胶等温转变过程中的流变性研究

使用RS75流变仪，采用小振幅振荡剪切方法和稳态剪切方法对含蜡原油在溶胶 -凝胶等温转变过程中的流行了研究．结果表明，等温转变成的凝胶原油的结构在 很大程度上决定于预剪切速率，非牛顿含蜡原油在结构恢复过程中表现出不可逆的 触变特性．而凝胶原油在外力作用下向溶胶状态转变的过程中，要经历从线性粘弹 性变形，到非线性粘弹性变形，再到结构屈服的过程，且高剪切应力下的溶胶原油 结构与预剪切速率无关．     

新型YS类高分子铑配合物催化甲醇羰基化反应制备乙酸和乙酐

以含有两种不同配位原子的线型或交联大孔球型共聚物为配体的新型铑配合物,能在温和条件下催化甲醇羰基化为乙酸和乙酐.实验结果表明,这些新型共聚物铑配合物具有鳌合型顺-二羰基铑(Ⅰ)的结构特征,并有良好的热稳定性及高的催化活性和选择性.     

Deposition of complex multielemental thin films

Modern condensed-matter physics is increasingly concerned with the design, synthesis, analysis, and exploitation of chemically complex materials and structures. Complex metal oxides and strongly correlated electron systems such as YBa₂Cu₃O_7−x and La_1−xSr_xMnO₃ are paradigmatic examples. Their production in the form of high-quality thin films is of both technological and fundamental importance and has stimulated a concerted effort in the last two decades to find and optimize efficient techniques to this end. This review discusses the physics behind and the requirements for synthesizing high-quality films of such materials and examines fundamental aspects of the growth processes associated with magnetron sputtering and pulsed laser deposition, the two techniques which presently offer the best solutions in this burgeoning field.     

Determination of complex formation constants by phase sensitive alternating current polarography: Cadmium-polymethacrylic acid and cadmium-polygalacturonic acid

The use of phase sensitive alternating current polarography (ACP) for the evaluation of complex formation constants of systems where electrodic adsorption is present has been proposed. The applicability of the technique implies the previous selection of the phase angle where contribution of capacitive current is minimized. This is made using Multivariate Curve Resolution by Alternating Least Squares (MCR-ALS) in the analysis of ACP measurements at different phase angles. The method is checked by the study of the complexation of Cd by polymethacrylic (PMA) and polygalacturonic (PGA) acids, and the optimal phase angles have been ca. −10° for Cd-PMA and ca. −15° for Cd-PGA systems. The goodness of phase sensitive ACP has been demonstrated comparing the determined complex formation constants with those obtained by reverse pulse polarography, a technique that minimizes the electrode adsorption effects on the measured currents.     

Theoretical study on conformational conversion of 1,3-dioxane inside a capsular host

The conformational conversion of 1,3-dioxane guest encapsulated inside a cylindrical capsular host was investigated with PM3 method and single point energies were evaluated by B3LYP method. When entrapped in the capsule, the guest tumbles were slower than that in the free condition. The influences of the inner phase of the capsule on the guest conformational conversion were discussed in detail.     

Vibronic intensities in centrosymmetric lanthanide complex ions. I

Summary A theoretical model to calculate the vibronic intensities induced by the odd vibrational modes in centrosymmetric lanthanide complexes is developed and applied to octahedral complex ions, LnX ₆ ^3– , such as occur in the hexachloroelpasolites Cs₂NaLnCl₆. Both the crystal field and the ligand polarisation contributions are evaluated using a standard set of symmetry coordinates. For the crystal field term a truncated expansion of the intermediates states is employed rather than the more conventional closure approximation. Special care is necessary to ensure that the phases of the contributions are correctly determined since the cross-term between the ligand polarisation and crystal field contributions is signed. General equations applicable to anyf ⁿ complex ion are derived and an example of their application to the PrCl ₆ ^3– ion is given The agreement with experiment is satisfactory.     

Cu（Ⅱ）—胱氨酸络合物吸附波的研究及蛋白质中胱氨酸的测定

研究了Cu(Ⅱ)-胱氨酸络合物极谱波的性质;提出了一种用示波极谱法测定蛋白质中胱氨酸的新方法,可在8.0×10~(-4)mol/L Cu~(2+)+8.0×10~(-3)mol/L三乙醇胺的溶液中测定0.05～20mg/L的胱氨酸。     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.