The overall adhesion-spreading process of liposomes on a mercury electrode is controlled by a mixed diffusion and reaction kinetics mechanism

Using high-resolution chronoamperometric measurements, with sampling each 1.333 μs, the initial step of the adhesion-spreading of liposomes on a mercury electrode was studied. These measurements allow getting a deeper insight into the first interaction of the liposomes with the mercury electrode, and they show that the overall adhesion-spreading process at different potentials is partially controlled by a fast but weak interaction equilibrium resulting in a mixed diffusion- and reaction-kinetics-controlled mechanism of the overall reaction. The authors dedicate this contribution to Keith Oldham on the occasion of his 80th birthday. Since my (FS) first meeting with Keith Oldham in Alan Bond’s laboratory in Australia in 1987, I had the privilege to get Keith’s unerring advice and have stimulating discussions with him for which I like to cordially thank him.     

A model for the propagation of a redox reaction through microcrystals

Chronoamperometry of reversible redox reactions with the insertion of cations into solid particles immobilised at an electrode surface is analysed theoretically using a semiinfinite planar diffusion model. A coupled diffusion of electrons and ions within the crystal lattice is separated in two differential equations. The redox reaction is initiated by the polarisation of the three-phase boundary, where the crystal is in contact with both the electrode and the solution. From this contact line the redox reaction advances on the surface and into the crystal body by the diffusion of ions and conductance of electrons. The effects of the geometry and conductivity of the particles on the current are discussed. Received: 28 December 1996 / Accepted: 17 February 1997     

微环电极上双电位阶跃计时电流和计时库仑法可逆波理论及其验证

推导了微环电极上双电位阶跃计时电流和计时库仑法可逆波理论方程式，并得到了解析表达式。对其电流电量曲线的特性进行了讨论。在亚铁氰化钾－氯化钾体系中，用金微环电极在自制的微机多功能电化学仪器上进行了实验验证，实验结果与理论相符。     

Chronoamperometric and Voltammetric Characterization of Gold Ultramicroelectrode Arrays

Some prototypes of photolithographic‐built arrays of gold ultramicroelectrodes (UMEAs) have been electrochemically characterized and compared with a normal‐size electrode. The achievement of steady‐state conditions, effects of supporting electrolyte and the role of conditioning and activation have been considered. The results obtained show that it is possible to monitor the effective area of those devices by chronoamperometry, which confirms the convenience of using the internal auxiliary and reference electrodes and this evidences that steady‐state currents are holding in a wide range of scan rates. Additionally, some preliminary tests show the promising features of gold UMEAs in flow systems like FIA or HPLC.     

Electrocatalytic Oxidation and Voltammetric Determination of L‐Cysteic Acid at the Surface of p‐Bromanil Modified Carbon Paste Electrode

The electrochemical properties of L ‐cysteic acid studied at the surface of p‐bromanil (tetrabromo‐p‐benzoquinone) modified carbon paste electrode (BMCPE) in aqueous media by cyclic voltammetry (CV) and double step potential chronoamperometry. It has been found that under optimum condition (pH 7.00) in cyclic voltammetry, the oxidation of L ‐cysteic acid at the surface of BMCPE occurs at a half‐wave potential of p‐bromanil redox system (e.g., 100 mV vs. Ag|AgCl|KCl_sat), whereas, L ‐cysteic acid was electroinactive in the testing potential ranges at the surface of bare carbon paste electrode. The apparent diffusion coefficient of spiked p‐bromanil in paraffin oil was also determined by using the Cottrell equation. The electrocatalytic oxidation peak current of L ‐cysteic acid exhibits a linear dependency to its concentration in the ranges of 8.00×10^?6 M–6.00×10^?3 M and 5.2×10^?7 M–1.0×10^?5 M using CV and differential pulse voltammetry (DPV) methods, respectively. The detection limits (2σ) were determined as 5.00×10^?6 M and 4.00×10^?7 M by CV and DPV methods. This method was used as a new, selective, rapid, simple, precise and suitable voltammetric method for determination of L ‐cysteic acid in serum of patient's blood with migraine disease.     

Electrochemical study of the interaction between cytochrome P450sccK201E and cholesterol

Cytochrome P450sccK201E, mutated form of cytochrome P450scc native recombinant (P450sccNR), was employed to study the enzyme–substrate interaction. The detection of the cholesterol was performed by electrochemical method using cyclic voltammetry (CV) and chronoamperometry measurements. The biochemical analysis was realized to observe the electrochemical responses of the engineerized enzyme to three different forms of cholesterol: free, low-density lipoprotein (LDL) and high-density lipoproteins (HDL). Compared to cytochrome P450sccNR, the cytochrome P450sccK201E displays a different behavior in the interaction with the substrate detection.

The results show that the engineerized enzyme can be utilized for the cholesterol detection in biosensor field.     

Pitting corrosion of zinc in alkaline medium by thiocyanate ions

This paper describes the use of potentiodynamic anodic polarization, cyclic voltammetry and chronoamperometry techniques in order to study the pitting corrosion susceptibility of a Zn electrode in KOH solutions containing KSCN as a pitting corrosion agent. Measurements were conducted under different experimental conditions. The results demonstrated that in the absence of KSCN, the anodic voltammetric response displays two anodic peaks prior to reaching the oxygen evolution potential. The first anodic peak A₁ is related to the electroformation of Zn(OH)₂. Peak A₁ is followed by a wide passive region which extends up to the appearance of the second anodic peak A₂. The latter is assigned to the formation of ZnO₂. Addition of SCN⁻ ions to the KOH solutions stimulates the anodic dissolution through peak A₁ and breaks down the passive layer prior to peak A₂. The breakdown potential decreases with an increase in SCN⁻ concentration and temperature, but increases with an increase in KOH concentration and potential scan rate. Successive cycling leads to a progressive increase in breakdown potential. The current/time transients show that the incubation time for passivity breakdown decreases slightly with increasing applied positive potential, SCN⁻ concentration, and temperature.     

Electrochemical properties of modified carbon paste electrodes containing some amino derivatives of 9,10-anthraquinone

The preparation and aqueous electrochemistry of carbon paste electrodes modified by some amino-substituted 9,10-anthraquinones are reported. In all cases, the reduction processes studied by cyclic voltammetry reveal a quasi-reversible behavior. The half-wave potentials were calculated as a function of the solution pH and from the resulting potential-pH plots the formal potentials and pK _a ^′ values of different redox and acid-base couples involved at various pH ranges were evaluated. The diffusion coefficients of different anthraquinone derivatives used in paraffin oil were calculated by chronoamperometry. Received: 3 May 1999 / Accepted: 15 November 1999     

Novel amperometric sensor using metolcarb-imprinted film as the recognition element on a gold electrode and its application

A molecularly imprinted film is electrochemically synthesized on a gold electrode using cyclic voltammetry to electropolymerize o-aminothiophenol in the presence of metolcarb (MTMC). The mechanism of the imprinting process and a number of factors affecting the activity of the imprinted film are discussed and optimized. Scanning electron microscope observations and binding measurements have proved that an MTMC-imprinted film (with a thickness of nearly 100 nm) was formed on the surface of the gold electrode. The film exhibited high binding affinity and selectivity towards the template MTMC, as well as good penetrability, reproducibility and stability. A novel amperometry sensor using the imprinted film as recognition element was developed for MTMC determination in food samples. Under the experimental conditions, the MTMC standard is linear within the concentration range studied (r² = 0.9906). The limit of detection (S/N = 3) of the modified electrode was achieved to 1.34 × 10⁻⁸ mol L⁻¹. Recoveries of MTMC from spiked apple juice, cabbage and cucumber samples for the developed electrochemical assay ranged from 94.80% to 102.43%, which was with great correlation coefficient (0.9929) with results from high-performance liquid chromatography. In practical application, the prepared amperometric sensor also showed good reproducibility and long lifetime for storage. The research in this study has offered a rapid, accurate and sensitive electrochemical method for quantitative determination of MTMC in food products.     

双水杨醛缩乙二胺烷基钴(Ⅲ)配合物电化学氧化动力学的研究

用循环伏安法、计时电流法、线性扫描伏安法及lgi～E法研究了双水杨醛缩乙二胺烷基钴(Ⅲ)配合物[RCo(Salen),R=CH₃,C₂H₅,n-C₄H₉,i-C₄H₉]在Au电极上的电化学氧化动力学过程,测定了RCo(Salen)的电极反应的速率常数k_s、电子转移数n₁、电荷传递系数a、标准电极电位E⁰、扩散系数D;同时,还测定了氧化产物化学分解加速率常数k_f及分解产物电解氧化的电子转移数n₂等参数,实验表明RCo(Salen)的电化学反应是ECE过程,R基对E⁰、k_f等均有影响。