一种新的乙酰胆碱酶电极的研究

本文制备了一种以溶剂聚合膜ＰＨ电极作原电极，经高碘酸钠活化的醋酸纤维膜固定乙酰胆碱酯酶的乙酰胆碱生物电极。研究了酶固定化条件的影响，测得静态和动力学条件下的线性中响应范围分别为２４０－１３００μｇ／ｍＬ和３００－１７００μｇ／ｍＬ将电极用于实际样品的回收率试验中，获得了满意的结果。     

巯基丁二胺铜单层修饰金电极上HIV-p24抗原的电化学免疫检测

制备了用巯基丁二胺铜(CuL)修饰的金电极并用作HIV-p24抗原蛋白(简称p24)免疫检测的化学传感器。CuL通过单层自组装固定在金电极表面,其覆盖率为1.02×10-11mol.cm-2,在含有1.0 mmol.L-1过氧化氢并在pH 6.2的磷酸盐缓冲溶液中,制备的校正曲线的线性范围为0.5-150μg.L-1p24对相应的伏安响应,方法的检出限为0.2μg.L-1。在10μg.L-1p24浓度水平作精密度试验,得RSD值为3.5%,于试样中分别加入5,15,20及30μg.L-1p24进行回收率试验,所得结果在98%-102%之间。此方法毋需另加电子传递媒介体。应用此方法于临床血清分析,所得结果与放射性免疫法的结果一致,且所得RSD值均小于0.3%。     

聚中性红膜修饰电极的电化学特性及其电催化性能

研究了中性红在玻碳电极表面电聚合成膜的方法和条件，对膜内电荷传输过程和电化学特性分别用循环伏安技术和电位阶跃暂态技术进行了初步探讨。该膜对维生素Ｃ和亚硝酸盐有较强的电催化作用，催化电流与底物浓度在很宽的范围内呈线性关系，可用于实际样品的分析。     

Investigation of the electrocatalytic behavior of single-wall carbon nanotube films on an Au electrode

The voltammetric behavior of uric acid (UA) was studied with an Au electrode modified with single-wall carbon nanotubes (SWNTs). In 0.1 M HAc-NaAc buffer solution (pH 5.0), the SWNT-modified electrode shows high electrocatalytic activity toward UA oxidation. The electro-oxidation of UA is an irreversible diffusion-controlled process with a diffusion coefficient (D) of 8.85×10⁻⁶ cm² s⁻¹. The peak current increases linearly with the concentration of UA in the range of 4.0×10⁻⁶-7.0×10⁻⁴ M. The detection limit is 1.0×10⁻⁶ M. The SWNT was characterized with scanning electron microscopy (SEM). Furthermore, the SWNT-modified electrode has favorable electrocatalytic activity toward dopamine and norepinephrine. This SWNT-modified electrode can also separate the electrochemical responses of uric acid, norepinephrine and ascorbic acid.     

三氯乙酸根离子选择电极的研制

以长链季铵盐为活性物研制成功PVC膜三氯乙酸根离子选择电极。该电极在1×10~(-1)～2×10~(-6)M Cl_3CCOO-离子浓度范围内显示良好的Nernst响应,检测下限为1.2×10~(-6)M。用固定干扰法测定了该电极对Ac~-、Cl~-,SO_4~-、H_2PO_4~-、HCO_3~-、CO_3~-,Cl_2CHCOO~-、NO_3~-等离子的选择性系数,仅NO_3~-有明显干扰。电极适用于中性、偏碱性溶液,在1×10~(-3)M Cl_3CCOONa溶液中,pH 7.0～12.5电势读数稳定。电极连续工作五小时电势变化为±1mV,可以作为一种分析三氯乙酸盐的简便快速方法。这对控制环境污染,判断职业中毒都十分重要。     

低电流密度下恒电流法制备的聚苯胺修饰电极

研究了低电流密度下恒电流法制备的聚苯（ＰＡ）修饰电极的性质及其影响因素，探讨了低电流密度聚合的ＰＡ膜的优点。发现此种条件下聚合的ＰＡ膜具有较好的电荷传输能力，它不仅对Ｂｒ＾－，Ｔｌ＾＋／Ｔｌ等电对的氧化还原反应有更好的电催化活性，而且对Ｈ＾＋的Ｎｅｒｎａｓｔ响应也更接近理论值。     

电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

Underpotential deposition of tin(II) on a gold disc electrode and determination of tin in a tin plate sample

This work describes a study of the underpotential deposition (UPD) of Sn²⁺ on a polycrystalline gold disc electrode using cyclic voltammetry (CV) and chronocoulometry (CC). Sn²⁺ ions showed well-defined peaks from UPD and UPD stripping (UPD-S) in 1 mol/L HCl solutions, while bulk deposition (BD) and BD stripping (BD-S) of the ions were also observed. The measured UPD shifts, E_UPD, between the UPD-S and the BD-S peaks were more than 200 mV. The UPD charge and the surface coverage of tin were measured by CC. A new method for determining Sn²⁺ was therefore developed, based on the excellent electrochemical properties of the Au/Sn UPD system. A plot of the UPD-DPASV (differential pulse anodic stripping voltammetry) signal versus the Sn(II) concentration was obtained for [Sn(II)] of 1.98×10^–7 to 3.64×10^–5 M. The method developed here has been applied to determine the tin in a tin plate sample.