Use of zwitterionic buffer additives to improve the separation of proteins in capillary zone electrophoresis

In CZE, the adsorption of the proteins on the capillary wall is a common problem. This paper describes the simple method of utilizing zwitterionic buffer additives to improve the separation of proteins in untreated fused silica capillaries at neutral pH. Three kinds of zwitterion are evaluated in the separation of acidic, neutral, and basic proteins, including their effect on protein efficiency, mobility, separation, and resolution; the difference between the effects of the different additives are also highlighted. The method has proved to be a possible means of reducing protein adsorption, especially for basic proteins.     

Nitro musks in cosmetic products—determination by headspace solid-phase microextraction and gas chromatography with atomic-emission detection

Summary The combination of headspace solid-phase microextraction with atomic-emission detection enables highly selective and sensitive determination of itro musk compounds in cosmetic products. Sample preparation is considerably simplified; there is no solvent extraction step. Enrichment is influenced by the type and amount of cosmetic product investigated. The lowest amount giving well detectable peaks is 1 mg musk compound per kg sample. Calibration curves obtained from spiked solutions of selected reference cosmetics in water show very good linearity. Relative standard deviations of peak areas from repeated measurements are usually <10%. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Native ethylene glycol in wine: Application of a dead volume free,very fast “deans heart-cut” system on-line with multi-chromatography

Data about the existence of native HO? CH₂? CH₂? OH (MEG) in natural wines and champagne has led to delicate questions because of legal decisions already made to declare wine or champagne illegal for sale if the MEG concentrations found are above 10 mg/liter. Action has been taken because of the DEG (diethylene glycol) disaster in European wines of 1985…86. An incorrect legal decision was made due to the belief that MEG cannot be produced biochemically by grape vines. A further reason may be lack of correct data on native MEG trace concentrations, as a result of the special behavior of this diol. As first member of a homologous series whose higher members (C₄) are normally found in all wines at quite high concentration levels, MEG shows extremely adsorptive behavior. The solution of the chromatographic problems is summarized in this paper. MEG concentrations in Riesling as example are in the range of 2 to 6 mg/liter and can easily be increased by biotechnological steps to a level of around 10 to 60 mg/liter. This is again due to the specific adsorptive behavior of MEG, which can be enriched on filter surfaces and displaced when the wine acidity changes with changing types. In order to control and guarantee the qualitative and quantitative results of MEG analyses we used a combination of Deans heart cutting on-line with Multi-Chromatography. It was easy to produce false data by many otherwise useful single column or two-dimensional separation processes, etc.     

Separation and determination of m-phenoxybenzaldehyde reaction products by capillary gas chromatography

A capillary GC method employing an internal standard has been developed and successfully used for quantitative determination both of the raw materials used for the manufacture of m-phenoxybenzaldehyde and for the components of the reaction mixtures obtained at various stages of the development of the process. A complete analysis can be performed in a single temperature programmed run.     

利用电泳技术在不锈钢和铁基底上制备MgB2带材

本文首次报道了利用电泳技术在铁和不锈钢基底上制备MgB2超导带材.电阻测量表明,沉积在铁和不锈钢基底上MgB2带材的超导零电阻转变温度分别为37.5K和31K,超导转变宽度分别为0.3K和1K.磁测量表明,(5K,OT)时不锈钢基底上带材的临界电流密度为6×105(A/cm2).X射线衍射谱和扫描电子显微镜图象表明样品结晶良好,晶粒生长致密.本工艺制备MgB2带材时不受系统真空度的限制,生长迅速,成本低廉,并且可以根据不同的需要任意选择基底的形状和大小.     

Adsorption of argon and nitrogen in cylindrical pores of MCM-41 materials: application of density functional theory

Adsorption of argon and nitrogen at their respective boiling points in cylindrical pores of MCM-41 type silica-like adsorbents is studied by means of a non-local density functional theory (NLDFT), which is modified to deal with amorphous solids. By matching the theoretical results of the pore filling pressure versus pore diameter against the experimental data, we arrive at a conclusion that the adsorption branch (rather than desorption) corresponds to the true thermodynamic equilibrium. If this is accepted, we derive the optimal values for the solid-fluid molecular parameters for the system amorphous silica-Ar and amorphous silica-N₂, and at the same time we could derive reliably the specific surface area of non-porous and mesoporous silica-like adsorbents, without a recourse to the BET method. This method is then logically extended to describe the local adsorption isotherms of argon and nitrogen in silica-like pores, which are then used as the bases (kernel) to determine the pore size distribution. We test this with a number of adsorption isotherms on the MCM-41 samples, and the results are quite realistic and in excellent agreement with the XRD results, justifying the approach adopted in this paper.     

Synthesis of Bioactive and Porous Organic-Inorganic Hybrids for Biomedical Applications

Bioactivity has been exhibited by a limited range of ceramics since the invention of Bioglass®. Recently, some bioactive polymeric organic-inorganic hybrids were introduced, including not only organically modified silicates (Ormosils) synthesized from polydimethylsiloxane (PDMS) and tetraethoxysilane but also those with gelatin and 3-glycidoxypropyl-tremethoxysilane. Preparation of the bulk and porous hybrids and their polymeric structures analyzed by Si NMR spectroscopy were presented. In vitro bioactivity or apatite deposition in a simulated body fluid of the Kokubo recipe were also described for those hybrids. Freeze-drying techniques introduced porosity (up to 90%) and pores extending in a preferred direction.     

Synthesis of MgAl2O4 Spinel Nanometer Powder via Biology Polysaccharide Assisted Sol-Gel Process

A novel and cost-effective sol-gel process for preparation of MgAl₂O₄ spinel nanometer powders has been developed in this study. A solution of magnesium and aluminum nitrates in stoichiometric proportion was successfully embraced in the biology polysaccharide gel network, formed by the synergistic interaction between xanthan gum (XG) and locust bean gum (LBG) utilizing their broad-spectrum stability of salt tolerance and character of transformation from sol to gel on the condition of proper temperature and relative proportion of polymeric components. Dry gel could be obtained by vacuum dehydration of aqueous gel at low temperatures. Monolithic MgAl₂O₄ spinel nanometer powders were produced by calcining the dry gel above 800°C, with average crystallite size of 20 nanometers.     

毛细管放电X光激光中的预脉冲研究

 为研究毛细管放电X光激光中预脉冲放电对增益的影响，用简化的XDCH程序，模拟计算了聚乙烯毛细管充Ar气、2μs脉宽的预脉冲放电过程，把预放电之后的等离子体温度、密度和电离度作为初始条件，输入XDCH程序，进行40kA典型主脉冲放电的计算模拟，给出了一些典型预放电幅度下的增益和电子密度分布情况。比较分析的结果发现，对2μs脉宽的预脉冲，100A的电流将得到较好的增益，并且预言激光线时间谱可能出现双峰结构，空间谱会出现环状结构。     

Thickness decrease of a grafted polyelectrolyte membrane exposed to shear flow

The effect of the shear flow on the thickness change of a polyelectrolyte membrane grafted onto a glass substrate was directly investigated with a flow cell combined with a confocal laser scanning microscope. The membrane thickness decreased proportionally to an increase in the shear stress of the flow when the shear rate exceeded a critical value of 1 s^?1. The higher the ionic strength was of the fluid, the greater the thinning effect was. The correlation between the critical shear rate and the relaxation of the polymer in the gel membrane was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2808–2815, 2003