多氟烷基取代的环丙烷衍生物的合成

以连二亚硫酸钠为引发剂, 烯丙基丙二酸二乙酯与多氟烷基碘代烷在温和反应条件下反应, 方便地得到一系列多氟烷基取代的环丙烷衍生物, 产率45%～55%. 在相同条件下, 烯丙基乙酰乙酸乙酯与多氟烷基碘代烷反应得到相应的加成物, 加成物随后用碱处理也得到环合的产物.     

固体超强酸SO_4~(2-)/SiO_2-TiO_2催化合成异维生素C钠

在异维生素C钠(D-VcNa)的合成过程中,以SO42-/S iO2-TiO2复合固体超强酸作为酯化反应催化剂,2-酮基-D-葡萄糖酸(2-KGA)和甲醇为原料,采用精馏脱水酯化工艺,不断除去酯化过程中产生的水。催化剂的最佳焙烧温度为550℃,催化剂用量为2.5%;反应时间3~4 h,产品收率为88.6%,催化剂的重复使用性较好,催化体系优于硫酸法。     

高血压类风湿症疗效与锌,钙关系初探

以临床典型病案为例，探讨了中医中药传统理论和现代微量元素研究的关系，重点讨论了向量元素锌、宏量元素钙与高血压、风湿症的病因病机和治疗关系。     

硼氢化钠水解制氢的研究

采用置换镀的方法在泡沫镍基体上获得不同载钌量的NaBH4水解制氢催化剂。实验结果表明，NaBH4水解制氢反应为零级反应，氢气生成速率随载钌量的增加而变快；当泡沫镍表面完全被钌覆盖时，载钌量为6%，相应的催化能力最强。与离子交换树脂载钌催化剂相比，泡沫镍载钌催化剂更稳定、耐用。实验还证实，30%比35%的NaBH4水溶液在相同的催化剂作用下更易发生水解反应；NaBH4水溶液中加入少量的NaOH有助于提高钌催化剂的催化性能。通过对NaBH4储氢体系的能量计算，说明采用该氢源体系的微型燃料电池的能量密度有望达到甚至超过锂离子电池的比能量水平。     

A common method for the determination of several calcium channel blockers using an HPLC system with ultraviolet detection

We report a common HPLC method for the single or simultaneous determination of four calcium channel blockers (CCB), namely diltiazem (DTZ), verapamil (VER), nifedipine (NIF) and nitrendipine (NIT) and their active metabolites demetildiltiazem and deacetildiltiazem (MA and M1), norverapamil (NOR), and dehydronifedipine (DHN). DHN was first synthesised in our laboratory and different pH values of the mobil phase were subsequently prepared and tested for chromatographic separation. The detection system and the environmental light conditions were optimised. The best separations of all analytes were obtained using a C₁₈ column and a mobile phase of methanol, 0.04 M ammonium acetate, acetonitrile and triethylamine (2:2:1:0.04 v/v). Quantitation was performed using imipramine (IMI) as the internal standard. For DTZ and its metabolites (M1 and MA), the wavelength chosen was 237 nm; for VER and its metabolite NOR, it was 210 nm; and, finally for NIF and its metabolite DHN and NIT it was 216 nm. When a simultaneous analysis was carried out the wavelength was of 230 nm. The optimum pH were 7.90 and 7.10 when the separation of NIT and DTZ or VER and NIF were carried out, respectively, and 7.90 when a simultaneous separation was carried out. The detection limit of the assay was less than 8 ng ml⁻¹ for all compounds, with coefficients of variation less than 7% (for inter- and intra-day) over the concentration range of 1–1000 ng ml⁻¹. The retention times were less than 11 min. When NIF or NIT were studied, it was necessary to use a sodium vapour lamp in order to avoid the photodegradation which takes place under daylight conditions.     

Ion-exchange selectivity of a network calixarene-containing polymer obtained by the template synthesis on Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, and Ba<Superscript>2+</Superscript> matrices

The ion-exchange equilibrium in network polymers obtained from cis-2,8,14,20-tetraphenyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene by template synthesis on cations Na⁺, K⁺, and Ba²⁺ as matrices was studied. The selectivity coefficients of ion exchanges Ba²⁺-H⁺, Na⁺-H⁺, K⁺-H⁺, Na⁺-K⁺, and Na⁺-NH₄ ⁺ were determined. The template synthesis enhanced the affinity of the polymers to matrix-forming cations by 6–8 kJ mol⁻¹. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1919–1922, August, 2005.     

Catalytic Kinetic Spectrophotometric Method for Determination of Phosphate Ion

The kinetic method for the determination of phosphate microamounts was described. The developed method is based on catalytic effect of phosphate on sodium pyrogallol-5-sulphonate （PS） by dissolved oxygen. The reaction was followed spectrophotometrically by measuring the rate of change in the values of the absorbance of the oxidation product at 437 nm. The optimum reaction conditions are PS （0.44×10^-3 mol·L^-1） and HClO4 （3.6×10^-6 mol·L^-1） at 25 ℃. Following this procedure, phosphate can be determined with a linear calibration graph up to 0.23 μg·mL^-1. The interference effect of several species was also investigated and it was found that the most common cations and anions did not interfere with the determination. The developed procedure was successfully applied to the determination of phosphate in natural waters and soil.     

Macro-, Micro-, Nano- and Crystal Structures of a Homodinuclear Complex [NH3（ CH2）3NH3]2{Na2[（C6H4O2）2]（C6H4O2H）2}

A homodinuclear complex （NH3CH2CH2CH2NH3）2 {Na2[（C6H4O2）2] （C6H4O2H）2} （1） has been synthesized by a solution-based self-assembly route. It crystallized in monoclinic system with space group P21/c. Every sodium ion coordinates in a tetragonal prism fashion with two O atoms of a terminal chelating catecholate ligand and three O atoms from two bridging catecholate ligands. Two neighboring NaO5 tetragonal prisms are edge-shared and centrosymmetric with regard to the inversion center to form a binuclear cluster {Na2[（C6H4O2）2]（C6H4OOH）2}^4- anion. The complex anions were aligned parallelly by n-n interaction and linked with the protonated 1,3-propylenediamine through hydrogen bonds which were assembled into a multi-lamellar structure with channels. The crystal exhibits rectangular geometry with an interior triangle hollow structure under optical microscopy. And the scanning electron microscopy （SEM） indicates that the wall of the tubes shows multi-lamella morphologies. Further, the transmission electron microscopy （TEM） reveals that the crystal is composed of multi-lamellar nano-tubes with diameters less than 100 nm. The molecular structure of the complex was compared with that of its isomer complex 2.     

Poly(N-vinyl-2-pyrrolidone) and 1-Octyl-2-pyrrolidinone Modified Ionic Microemulsions

The influence of the nonionic polymer poly(N-vinyl-2-pyrrolidone) (PVP) in comparison to the surfactant 1-octyl-2-pyrrolidinone (OP) on the phase behavior of the system SDS/pentanol/xylene/water was studied. In both modified systems a strong increase in the water solubilization capacity was found, accompanied by a change in the spontaneous curvature toward zero. In the polymer-modified system an isotropic phase channel is formed with increasing polymer content that connects the L1 and the L2 phase. The lamellar liquid crystalline phase is destabilized in both cases. In the L1 phase the adsorption of PVP at the surface of the microemulsion droplets and the formation of a cluster-like structure is proven by several methods like ¹³C NMR T₁ relaxation time measurments, zeta potential measurements, and rheology. In the L2 phase a modification of the interface of the inverse droplets is detected by a shift in the percolation boundary (conductivity) and ¹³C NMR T₁ relaxation measurements. The formation of a cluster-like structure can be assumed on the basis of our rheological measurements.     

Apparent molar heat capacities of aqueous solutions of acetic,propanoic and succinic acids,sodium acetate and sodium propanoate from 300 to 525 K and a pressure of 28 MPa

The apparent molar heat capacities of dilute aqueous solutions of acetic, propanoic and succinic acid and sodium salts of the two monofunctional acids were measured at 300 Kp,2 ^o . After subtracting the heat capacity of a point mass, the remaining heat capacity was successfully decomposed into functional group contributions at all temperatures. Together with the results of our previous paper on alcohols and diols the heat capacity contributions of the CH₂, CH₃, OH, COOH, (COOH)₂, and COONa groups are now available and these allow reasonably accurate predictions of the heat capacities of all compounds composed of these groups in this temperature range.