Concanavalin a immobilized affinity adsorbents for reversible use in yeast invertase adsorption

Concanavalin A (Con A) immobilized poly(2-hydroxyethyl methacrylate) (PHEMA) beads were investigated for specific adsorption of yeast invertase from aqueous solutions. PHEMA beads were prepared by a suspension polymerization technique with an average size of 150-200 microm, and activated by epichlorohydrin. Con A was then immobilized by covalent binding onto these beads. The maximum Con A immobilization was found to be 10 mg/g. The invertase-loading capability of the PHEMA/Con A beads was 107 mg/g. The maximum invertase adsorption capacity on the PHEMA/Con A adsorbents was observed at pH 5.0. The values of the Michaelis constant K(m) of invertase were significantly larger upon adsorption, indicating decreased affinity by the enzyme for its substrate, whereas V(max) was smaller for the adsorbed invertase. Adsorption improved the pH stability of the enzyme as well as its temperature stability. Thermal stability was found to increase with adsorption. The adsorbed enzyme activity was found to be quite stable in repeated experiments. Storage stability of adsorbed invertase.     

4-hydroxy-2-quinolones. 96. Synthesis and properties of 4-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylic acid

Alkaline hydrolysis of the ethyl ester of 4-(cyanoethoxycarbonylmethyl)-2-oxo-1,2-dihydroquinoline-3-carboxylic acid is accompanied by decarboxylation with loss of two molecules of CO₂ and leads to 4-methyl-2-oxo-1,2-dihydroquinoline-3-carboxylic acid. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 887–893, June, 2006.     

On the Existence and Hydrolytic Stability of Titanosiloxane Bonds in the System: Glycidoxypropyltrimethoxysilane-Water-Titaniumtetraethoxide

Heterometal materials based on glycidoxypropyltrialkoxysilane and titaniumalkoxide are used for optical applications and require a high homogeneity on the molecular level. The presence of heterometal titanosiloxanes, their distribution and hydrolytic stability should influence the homogeneity of these materials. 29Si and 17O NMR spectroscopy has been used to investigate sols with molar ratios Si : Ti = 1 and H2O : OR (H) = 0.5 – 2.0 and their gels after heat treatment at 130°C. The presence of Si—O—Ti bonds in sols with a low water content (H < 0.2) and in the corresponding gels was identified by the high-field shift of the 29Si NMR signals of T1 and T2 units of up to 2–3 ppm compared to corresponding signals of homo-condensed Si—O—Si bonds. The existence of Si—O—Ti bonds in the sols is supported by 17O NMR spectra which show a characteristic signal around 340 ppm. A cleavage of the Si—O—Ti bonds occurs with increasing water/OR ratio in the sols. The cleavage of the heterometal bonds and the building up of homo-condensed species leads to a separation into areas with predominantly Ti—O—Ti and Si—O—Si bonds resulting in a decreased molecular homogeneity of the materials.     

Synthesis of thiopheno-quinizarine derivatives

4,11-Dihydroxyanthra[2,3-b]thiophene-5,10-dione (thiophenoquinizarine) and its 3-methyl derivative were obtained by the cyclization of quinizarin-2-yl derivatives of mercaptoacetaldehyde or mercaptoacetone in acid medium. 4,11-Dimethoxy-and 4,11-dibutoxyanthra[2,3-b]thiophene-5,10-dione were synthesized by the alkylation of the hydroxyl group in the synthesized anthrathiophenes with dimethylformamide dimethylacetal or butyl iodide respectively. Radical bromination of 4,11-dimethoxy-3-methylanthra[2,3-b]thiophene-5,10-dione, depending on the amount of N-bromo-succinimide taken, leads to the formation of 3-bromomethyl-or 3-dibromomethyl-4,11-dimethoxy-anthra[2,3-b]thiophene-5,10-diones. The action of sodium acetate on the obtained bromo derivatives with subsequent hydrolysis of the intermediate acetates led to the synthesis of 3-hydroxymethyl-or 3-formyl-4,11-dimethoxy-anthra[2,3-b]thiophene-5,10-diones. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1478–1485, October, 2007.     

Efficient regio- and stereoselective ring opening of epoxides with alcohols, acetic acid and water catalyzed by ammonium decatungstocerate(IV)

Epoxides can be cleaved in a regio- and stereoselective manner under neutral conditions with alcohols and acetic acid in the presence of catalytic amounts of decatungstocerate(IV) ion, ([CeW₁₀O₃₆]⁸⁻), affording the corresponding β-alkoxy and β-acetoxy alcohols in high yields. In water, ring opening of epoxides occurs with this catalyst to produce the corresponding diols in good yields.     

Novel reaction systems for the synthesis of O-glucosides by enzymatic reverse hydrolysis

Our studies are presented to replace alcohols as solvents in reverse hydrolytic reactions catalyzed by immobilized β-glucosidase to synthesize O-substituted β-d-glucopyranosides in preparative-scale. We found that 1,2-diacetoxyethane is a suitable solvent and O-alkyl or aryl β-d-glucosides were synthesized in moderate yields (after isolation 12-19%). In these reactions proportion of glucose and glucosyl acceptor hydroxy compounds was 1:20. We suggest that 1,2-diacetoxyethane can be useful not only for alcohols but for other glucosyl donor compounds unsuitable for the role of solvent (e.g., phenols) in the synthesis of O-β-d-glucosides by reverse hydrolysis.     

水杨酸-2’-乙基己基酯在胶束中的增溶位点

考察了阳离子、非离子和阴离子表面活性剂存在下水杨酸-2’-乙基己基酯(EHS)的吸收光谱和激发态分子内质子转移(ESIPT)荧光光谱. 结果表明, EHS可增溶在胶束中, 2’-乙基己基碳链朝向胶束内核, 而水杨酸基朝向胶束-水界面; 胶束环境有利于EHS分子对紫外光的吸收和分子内氢键的形成, 从而使ESIPT 荧光显著增强, 激发态分子以发射可见光和非辐射去活化方式衰减; 并根据EHS和表面活性剂分子的结构和大小, 解释了EHS分子在胶束中的结合位点, 荧光猝灭和酯水解的光谱测量进一步为此结合位点提供了佐证.     

Kinetic and stability characterization ofChromobacterium viscosum lipase and its comparison withPseudomonas glumae lipase

A kinetic study ofChromobacterium viscosum lipase was undertaken, and compared withPseudomonas glumae lipase. Optimum operation conditions were pH 9.0 and 50°C for both enzymes. A substrate specificity study was also developed. Both enzymes showed higher activity on triglycerides with a long chain of fatty acid; the specific activity was always higher for C.viscosum lipase. Stability of both enzymes in aqueous medium at 60°C and pH 9.0 was evaluated. C.viscosum lipase was three times more stable than P.glumae lipase, with at _1/2 value of 0.75 h. In addition, the activity of C.viscosum lipase with substrate concentration was studied with a triolein emulsion. A dependence of the intrinsic characteristics of the emulsion was observed. Therefore, stability ofC. viscosum lipase B with reaction products was assayed in a micellar system. Acid products reduced the specific activity of the enzyme. Glycerol and high buffer concentration were stabilizers of enzyme deactivation. Finally, substrate specificity ofC. viscosum lipase B in a micellar system was developed with tributyrin, tricaprylin, and triolein. Only tributyrin showed an apparent Michaelis-Menten kinetic with V_max ^app = 958 U/mg and K_ma ^app = 75.5 mM. Tricaprylin and triolein showed diffusion limitations at low substrate concentration and substrate inhibition at high substrate concentration. Diffusion parameters were calculated for both these substrates. Mass transfer coefficients (k₁) were 0.314 Å/min and 1.53 Å/min for tricaprylin and triolein, respectively. Effectiveness factors (η) were 0.536 and 0.768 for tricaprylin and triolein, respectively.     

Preparation of high surface area ZrO2 and ZrO2-Y2O3 from the alkoxide

In order to obtain a catalyst support with a high surface area, ZrO₂ and ZrO₂-Y₂O₃ were prepared by the hydrolytic decomposition of the corresponding isopropoxide dissolved in benzene. The hydrolysis was carried out at 80°C using an excess amount of distilled water in flowing dry nitrogen. The precipitates thus obtained were dried at 100°C followed by calcination at 500°C in air or nitrogen for 1 h. The specific surface areas for both of the ZrO₂ and ZrO₂-Y₂O₃ increased with increasing amount of water added for hydrolysis, and the surface areas for ZrO₂-Y₂O₃ increased with increasing yttrium content. A ZrO₂ having a surface area of 130 m²/g was produced, and a stabilized tetragonal ZrO₂ with 15 mol% Y³⁺ having a surface area of 200 m²/g was produced. Furthermore, despite the difference in the ZrO₂ and ZrO₂-Y₂O₃ crystal structures, the lattice-strain of ZrO₂ has been unequivocally related to the surface area.     

New fluorescent probes for testing combinatorial catalysts with phosphodiesterase and esterase activities

Combinatorial development of new catalysts with phosphodiesterase and esterase activities requires specific fluorescent probes for rapid visual detection of hydrolytic activity. Such fluorescent probes have been synthesized with special attention to solubility in water and stability towards spontaneous hydrolysis at a given pH. The probes reported here include compound 5 based on a fluorescein fluorophore, compound 12 for FRET-detection of phosphodiester hydrolysis and compound 25 based on a quinolinium fluorophore.