基于储量结构变化的油田开发指标预测与优化数学模型研究

大型油田开发过程中,随着不同类型新储量的不断投入,地质储量结构发生变化,表征油田整体开发技术与经济效果的关键性指标,如产量、可采储量、采收率、储采比、开发成本与操作成本等等也随之改变,其变化规律可用一套数学模型来描述。在开发指标预测基础上,运用多属性决策方法如TOPSIS,可以实现新投产区块组合方案的优选。应用实例表明,本文方法实用、操作性强,可以为油区开发决策提供重要方法与手段。     

Synthesis and Crystal Structure of a Novel 1D Coordination Polymer: [Pr(BYBA)3(H2O)2]·[Pr(BYBA)3(H2O)]

The novel coordination polymer [Pr(BYBA)3(H2O)2]·[Pr(BYBA)3(H2O)] (BYBAH = 2-benzoylbenzoic acid) was yielded by hydrothermal synthesis, determined by single-crystal X-ray diffraction, and characterized by FT-IR and UV-Vis spectra. The crystal crystallizes in the triclinic system, space group P with a = 9.112(3), b = 14.644(5), c = 27.076(11) (A), α = 84.223(3), β = 87.816(4), γ = 88.902(4)o, V = 3592(2) (A)3, C84H60O21Pr2, Mr = 1687.14, Z = 2, F(000) = 1700, Dc = 1.560 g/cm3, μ = 1.419 mm-1, the final R = 0.0485 and wR = 0.1258 for 13035 observed reflections with I＞2((I). The compound contains two different building units, [Pr2(BYBA)6(H2O)4] and [Pr2(BYBA)6(H2O)2]. It is noticeable that [Pr2(BYBA)6(H2O)4] is an isolated binuclear building block, in which the Pr3 ion centers are both located in an eight-coordinated environment. However, in [Pr2(BYBA)6(H2O)2] the Pr3 ion centers are located in a nine-coordinated environment and connected by BYBA ligands to form 1D chains.     

端羟基芳香酯二醇扩链的聚氨酯－酯的DSC研究

端羟基芳香酯二醇扩链的聚氨酯－酯的ＤＳＣ研究陈静，余学海，杨昌正（南京化工学院应化系南京２１０００９）（南京大学化学系南京２１００９３）关键词嵌段聚醚聚氨酯－酯，结晶性，微观相结构，差示扫描量热法，形态结构众所周知，聚氨酯嵌段共聚物是一类结构特殊、用...     

Synthesis of tridimensional polymers by the copolymerization of phenylglycidylether with aromatic diglycidylethers

Copolymers from phenylglycidylether and several aromatic diglycidylethers are prepared using different ratios of difunctional comonomers and the AIP/ZnCl₂ initiator system. It is found that the percentage of incorporated comonomer depends on the nature of the aromatic moiety introduced. The copolymers are characterized by ¹³C-NMR spectroscopy and turn out to be completely regular and with a high degree of isotacticity (about 80%) that confirms the high degree of regio- and stereoselectivity of the initiator system used. The thermal characteristics of copolymer networks are investigated using differential scanning calorimetry and thermogravimetry. Two fusion endotherms are observed which vary with the degree of crosslinking. By thermogravimetric analyses the thermal stability is found to increase when the crosslinking degree does. © 1994 John Wiley & Sons, Inc.     

聚醚酮酮（PEKK）／4，4′-二苯氧基二苯砜（DPODPS）多嵌段共聚物的合成与性能

采用溶液缩聚法由酰氯端基聚醚酮酮(PEKK)齐聚物和4，4′-二苯氧基二苯砜(DPODPS)制备了PEKK／DPODPS多嵌段共聚物，用DSC、TGA等方法对共聚物进行了表征和性能测试。结果表明，随着共聚物中DPODPS含量的增加，共聚物的熔融温度逐渐降低，而其玻璃化转变温度则逐渐升高。当DPODPS质量分数在32．63％～40．73％范围内时，所得共聚物的Tg为185～193℃，比纯PEKK的Tg高出20～28℃；其Tm为322～346℃，比纯PEKK的Tm降低35～59℃，这既保持了纯PEKK的耐热性，又改善了熔融加工性能。该组成范围内的共聚物的拉伸强度(σi)为86．6～84．2MPa，拉伸模量(M)为3．1～3．4GPa，断裂伸长率(ε)为18．5％～20．3％。     

A new Monte Carlo simulation for two models of self-avoiding lattice trees in two dimensions

By means of a new Monte Carlo sampling of a grand canonical ensemble, we verify universality for the critical exponents and of two models of lattice trees constrained to be self-avoiding on sites or on bonds. The attrition constants are also obtained. This algorithm, a generalization of that recently proposed by Berretti and Sokal for random walks, appears to optimize the critical slowing down in the scaling region. Systematic and statistical errors are carefully estimated.     

反应挤出法合成S/B多嵌段共聚物的研究

在阴离子引发体系下 ,以双螺杆挤出机为反应器 ,采用丁二烯、苯乙烯混和单体加料方式 ,本体法一步合成了S B多嵌段共聚物 .考察了螺杆转速、进料速率以及不同丁苯配比对反应挤出合成PS及S B嵌段共聚物聚合转化率的影响 .用1 H NMR、IR、DMA、TEM等方法对S B嵌段共聚物进行了表征 ,结果表明共聚物由多个微小的丁二烯嵌段和少量无规段组成 .当丁二烯含量少至 15 %左右时 ,其嵌段可回缩成球状 ,粒径大约在 30～ 5 0nm .该材料的韧性随着共聚物中丁二烯含量的增加而逐渐提高 ,特别是断裂延伸率的提高尤为显著     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

用透射电镜法研究聚(苯乙烯-异戊二烯)二嵌段共聚物微相分离的微区尺寸

本文采用透射电镜(TEM)法,系统地研究了具有不同组成,不同分子量和不同形态结构的聚(苯乙烯-异戊二烯)二嵌段共聚物,并由TEM照片直接测量具有栓状,层状和有规双连续双金钢石(OBDD)结构的PS-PI二嵌共聚物的微区尺寸,讨论了其与分子量的关系。实验证明嵌段共聚物微相分离有规结构的微区尺寸大小与分子量呈2/3的关系。     

α－甲基苯乙烯对HIPS／SBS共混物流变行为及力学性能的影响

用锥板式流变仪研究了α－ＭＳ对ＨＩＰＳ／ＳＢＳ共混物流动行为的影响，结果表明：不同α－ＭＳ用量的共混物和如曲线相似．均随增加τ＿ｗ增大、η＿ａ下降。流动指数，ｎ均小于１为非牛顿假塑性流体。加入少量（约２．５％）α－ＭＳ使共混物熔融指数提高３倍，其总体力学性能变化不大。