Construction of a Graphene/Au‐Nanoparticles/Cucurbit[7]uril‐Based Sensor for Pb2+ Sensing

The development of highly sensitive and selective methods for the detection of lead ion (Pb²⁺) is of great scientific importance. In this work, we develop a new surface‐enhanced Raman scattering (SERS)‐based sensor for the selective trace measurement of Pb²⁺. The SERS‐based sensor is assembled from gold nanoparticles (AuNPs) and graphene using cucurbit[7]uril (CB[7]) as a precise molecular glue and a local SERS reporter. Upon the addition of Pb²⁺, CB[7] forms stronger complexes with Pb²⁺ and desorbs from AuNPs, resulting in a sensitive “turn‐off” of SERS signals. This SERS‐based assay shows a limit of detection (LOD) of 0.3 nm and a linear detection range from 1 nm to 0.3 μm for Pb²⁺. The feasibility of the assay is further demonstrated by probing Pb²⁺ in real water samples. This SERS‐based analytical method is highly sensitive and selective, and therefore holds promising applications in environmental analysis.     

Gold catalysed Suzuki-Miyaura coupling of arenediazonium o-benzenedisulfonimides

Arenediazonium o-benzenedisulfonimides have been used as efficient electrophilic partners in Au(I) catalysed Suzuki coupling reactions. The synthetic protocol is general, easy and produced either biaryls or heteroaryl arenes in good yields (51 positive examples, average yield 80%). o-Benzenedisulfonimide was recovered at the end of the reactions and was reused to prepare the starting salts for further reactions. Mechanistic insights suggest that the o-benzenedisulfonimide anion act as an electron transfer agent and promotes a catalytic cycle which does not require the presence of photocatalysts or external oxidants.     

Three-ligand Co-assembled 2D Au(I)-Thiolate Nanosheets

Two-dimensional (2D) Au(I)-thiolate assemblies are a special type of material that can balance high structural stability and rich surface functionality, which shows promising prospects in both fundamental research and applications. Co-assembly of multiple ligands is a facile way to further enrich the surface properties and functions, and expand their application potentials. In this work, taking 3-mercaptopropionic acid (MPA), cysteine (Cys) and 1-thioglycerol (TGO) as example ligands, we studied in detail the possibility to co-assemble them into one nanosheet. Although the three ligands have significantly different controllability and pathways when self-assembling individually with Au(I), they can still be effectively co-assembled by reacting with HAuCl₄ together to obtain three-ligand nanosheets with good colloidal stability. The key points for successful co-assembly are also revealed by comparing single- and three-ligand self-assembly processes, laying a solid foundation for co-assembly of even more ligands. The easy but powerful strategy for 2D materials with closely-packed and multiple tunable surface functional groups addresses the surface engineering problem for 2D materials and paves the way for their wider applications in sensing and biomaterials.     

Synthesis of 5-[(2-hydroxynaphthalen-1-yl)diazenyl]isophthalic acid and its application to electrocatalytic oxidation and determination of adrenaline,paracetamol, and tryptophan

In this study,Au nanoparticles/poly 5-[(2-hydroxynaphthalen-l-yl)diazenyl]isophthalic acid film modified glassy carbon electrode(AuNPs/poly(NDI)/GCE) has shown excellent electrocatalytic activity toward the oxidation of adrenaline(ADR),paracetamol(PAC),and tryptophan(Trp).The bare glassy carbon electrode(GCE) fails to separate the oxidation peak potentials of these molecules,while the poly(NDI) film modified electrode can resolve them.Electrochemical impedance spectroscopy(EIS)indicates that the charge transfer resistance of the bare electrode decreases as 5-[(2-hydroxynaphthalen-l-yl)diazenyl]isophthalic acid is electropolymerized on the bare electrode.Furthermore,EIS exhibits enhancement of electron transfer kinetics between analytes and the electrode after electrodeposition of Au nanoparticles.Differential pulse voltammetry results show that the electrocatalytic current increases linearly in the ranges of 0.01-680.0 μmol L~1 for ADR,0.05-498.0 μmol L~1 for PAC,and 3.0-632.0 μmol L~1 for Trp;with detection limits(S/N = 3) of 0.009 μmol L~1,0.005 μmol L~1,and 0.09 μmol L~1 for ADR,PAC,and Trp,respectively.The proposed method has been successfully applied for simultaneous determination of ADR,PAC,and Trp in biological samples.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40 nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83 A·m²·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。     

Chemisorption assembly of Au nanorods on mercaptosilanized glass substrate for label-free nanoplasmon biochip

The fabrication of a localized surface plasmon resonance nanosensor in a chip based format that utilizes Au nanorods (GNRs) as the optical transducer were systematically studied. (3-mercaptopropyl)trimethoxysilane (MPTMS) modified glass substrate offers GNR deposition with maximal sensitivity to local refractive index changes, which subsequently results in better optical recognition of receptor–analyte binding. Kinetics governing the mass transport and chemisorption of nanorods from bulk to solid surface can be dynamically controlled in a predictable fashion. We demonstrate that slight aggregation induced by a low ionic strength (5 mM NaCl) can facilitate the nanorod assembly to result in a dense, well-distributed surface monolayer. In high ionic media (e.g. 40–80 mM), anions present electrostatically bind with the positively charged cetyltrimethylammonium bromide (CTAB) surrounding nanorod surfaces, thereby leading to instability with heavy aggregation in solution. However, once chemically bound on silanized substrates, the nanorods exhibit excellent stability in physiological buffer where high amount of ionic species are present. The fundamental study is followed by demonstration of a practical application of the fabricated biochip in label-free detection based on GNR wavelength shift of the longitudinal palsmon maxima as the optical signature of human IgG model detection.     

Determination of Pd,Rh, Pt,Au in road dust by electrothermal vaporization inductively coupled plasma mass spectrometry with slurry sampling

Inductively coupled plasma mass spectrometry coupled with ultrasonic slurry sampling electrothermal vaporization (USS-ETV-ICP-MS) has been applied to determine Pd, Rh, Pt and Au in 0.5% m/v slurries of several road dust samples. 2% m/v ammonium pyrrolidine dithiocarbamate (APDC) was used as the modifier to enhance the ion count. The influence of instrument operating conditions, slurry preparation and interferences on the ion count was reported. This method has been applied to the determination of Pd, Rh, Pt and Au in BCR 723 Road Dust and NIST SRM 2709 San Joaquin Soil reference materials and two road dust samples collected locally. The analysis results of the standard reference materials agreed with the certified values. Precision between sample replicates was better than 10% for all the determinations. The method detection limits estimated from standard addition curves were 0.9, 0.4, 0.6 and 0.4 ng g⁻¹ for Pd, Rh, Pt and Au, respectively, in original dust samples.     

An ultrasensitive quantum dots fluorescent polarization immunoassay based on the antibody modified Au nanoparticles amplifying for the detection of adenosine triphosphate

In this work, an ultrasensitive fluorescent polarization immunoassay (FPIA) method based on the quantum dot/aptamer/antibody/gold nanoparticles ensemble has been developed for the detection of adenosine triphosphate (ATP). DNA hybridization is formed when ATP is present in the PBS solution containing the DNA-conjugated quantum dots (QDs) and antibody-AuNPs. The substantial sensitivity improvement of the antibody-AuNPs-enhanced method is mainly attributed to the slower rotation of fluorescent unit when QDs-labeled oligonucleotides hybridize with antibody modified the gold nanoparticle. As a result, the fluorescent polarization (FP) values of the system increase significantly. Under the optimal conditions, a linear response with ATP concentration is ranged from 8 × 10⁻¹² M to 2.40 × 10⁻⁴ M. The detection limit reached as low as 1.8 pM. The developed work provides a sensitive and selective immunoassay protocol for ATP detection, which could be applied in more bioanalytical systems.     

Preparation and Characterization of Polymer‐Protected Pt@Pt/Au Core‐Shell Nanoparticles

Poly(N‐vinyl‐2‐pyrolidone) protected Pt‐core bimetallic Pt/Au‐shell (Pt@Pt/Au) nanoparticles were prepared by multi‐step reduction of HAuCl₄ and H₂PtCl₆ alternately by hydrogen adsorbed on platinum atom. Transmission electronic microscopy (TEM) and x‐ray diffraction (XRD) were used to characterize Pt@Pt/Au nanoparticles. The structure of the shell of the nanoparticles seems to be the Au‐Pt solid solution.