希土脯氨酸配合物的合成和性质研究

通过希土氯化物与L-脯氨酸反应,制得了四种新的希土脯氨酸固体配合物。其通式为:Ln(prol)Cl₃·nH₂O(Ln=Y、La、Sm和Er).用化学分析、电导测定、热重分析、差热分析、红外光谱和核磁共振氢谱,确定了产物的组成,讨论了金属-配体的化学键性质。     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

微乳液法制备超细K2Ln2Ti3O10及其光催化活性研究

以钛酸四丁酯、氢氧化钾和镧系金属氧化物为原料。采用微乳液法制备了系列超细K2Ln2Ti3O10（Ln=La．Ce,Pr．Nd，Sm，Eu，Gd）光催化剂。并考察了其光催化活性。通过X射线衍射（XRD）、透射电镜（TEM）和紫外可见吸收光谱（UV—Vis）对其进行了表征。结果表明：用微乳液法制备催化剂可以在较低的温度下（900℃），用较短的烧结时间（3h）合成结晶度高、粒径较小（200Mm）的K2Ln2Ti3O10钙钛矿型层状结构化合物。催化剂在紫外光和可见光条件下均具有光催化降解甲基橙的活性。紫外光条件下可以明显提高光催化降解活性，降解率达到60％。     

ZBLAN玻璃中三价铒离子 2H11/2,4S3/2辐射跃迁的量子效率

为了探讨铒离子掺杂材料的激光制冷可能性, 依据测量样品的吸收光谱, 计算了Er3 掺杂的ZBLAN玻璃材料的Judd-Ofelt参数, 得到Ω2=3.01×10-20 cm2, Ω4=1.59×10-20 cm2, Ω6=1.03×10-20 cm2, 进而获得了2H11/2, 4S3/2及其以下各能级间跃迁的跃迁几率、分支比、寿命等数据. 测量了77 K到315 K温度范围内Er3 较强的两个绿色发射2H11/2, 4S3/2→4I15/2的发射谱及荧光寿命. 讨论了2H11/2, 4S3/2这样处于热平衡中的两个能级的量子效率的计算方法, 进而计算了它们的量子效率, 并与其它材料进行了比较.     

Ce(H_2O)_7Al(OH)_6Mo_6O_(18)·4H_2O: A New One-dimensional Zigzag Chainlike Structure of Anderson Cluster Linked by Cerium Ions

IntroductionPolyoxometalates(POMs),as an important familyof metal oxides,have been receiving considerable at-tention in solid-state materials chemistry due to their di-verse topological properties and potential applications incatalysis,photochemistry,electrochemistry,medicineand magnetism[1,2].Recently,one of the intriguingfields in the polyoxometalate chemistry is to find somenovel subunits and then connect them into one-,two-,even three-dimensional(1-,2-,even3-D)extendednetworks,either thro…     

Ni-SDC固体氧化物燃料电池阳极的合成和性质

采用柠檬酸-硝酸盐溶胶-凝胶低温自蔓延燃烧法制备氧化镍（NiO）粉末和Ce0.8Sm0.2O1.9（SDC）粉末，并将NiO与SDC按不同质量比和不同制备工艺制备了固体氧化物燃料电池（SOFC）的阳极前身。再用自组装的还原装置将其在820℃经2．5h还原后，采用四端子法测量其电导率值。分析了阳极片电导率与阳极片微结构、Ni的质量百分数、混合研磨时间及烧结温度之间的关系。结果显示，阳极片的电导率强烈依赖于镍含量和制备工艺。     

立方介孔相含钇氧化硅的合成与表征

以低浓度的十六烷基三甲基溴化铵为结构导向剂,在碱性条件下通过水热法合成了具有立方结构的含钇Y MCM 48介孔分子筛材料。XRD测试表明当Y/Si<0.05时可以获得典型的长程有序介孔立方结构相,随Y/Si比的增加,晶胞参数的增大和红外吸收光谱(FTIR)的变化为Y进入介孔分子筛骨架中提供了有力证据。N2吸附-脱附实验给出这种立方介孔材料的BET表面积为1180m2·g-1,BJH平均孔径为3.4nm。紫外 可见漫反射光谱(UV vis)证明钇以一种六配位的形式存在。X射线光电子能谱(XPS)进一步证明钇以三价形式存在于立方介孔分子筛骨架中。