B2O3/TiO2-ZrO2催化环己酮肟气相Beckmann重排反应研究Ⅱ.焙烧温度的影响

采用XRD、FT-IR和NH3-TPD等方法，研究了载体预焙烧温度和催化剂活化焙烧温度对B2O3/TIO2-ZRO2催化剂的结构、酸性和催化环己酮肟气相Beckmann重排反应性能的影响。结果表明，在383-773K范围内，载体预烧温度对催化剂性能的影响不大，但经973K高温预焙烧后，由于生成了ZrTiO4晶相，使其与H3BO3的相互作用减弱，从而导致催化剂的酸性和反应性能降低，提高催化剂活化焙烧温度，有利于B2O3与TiO2-ZrO2的相互作用，生成更多的Beckmann重排反应所需的中等强度酸中心，使催化剂的活性和选择性提高；但活化焙烧温度过高，会使催化剂中大量的B2O3晶粒析出，引起酸中心数量和催化活性的明显下降。     

[Co(amp)2Cl2]2[ZnCl4]体系中两对称异构体的2D NMR研究

The two symmetrical isomers in [Co(amp)₂Cl₂]₂[ZnCl₄](amp=2-(Aminomethyl)pyridine) system were syn-thesized by general oxidation method and were separated by chromatography and recrystallization method. Their configurations were assigned by using 2D NMR techniques, particularly the NOESY NMR spectra. Solvent used was Me₂SO-d₆ with the central peak of the CD₃ septet as the reference ( ₁₃C,δ 39.37; ₁H,δ 2.49 relative to SiMe₄). Cation exchange media used was Dowex 50Wx 2(H⁺ form, 200～400mesh; Biorad).     

柱前衍生高效液相色谱法测定四氢噻唑-2-硫酮-4-羧酸的光学纯度

用苯胺对四氢噻唑-2-硫酮-4-羧酸(TTCA)进行柱前衍生,将其衍生物在手性固定相上拆分,通过二极管阵列紫外检测器和在线旋光检测仪对其衍生物进行检测,建立了一种拆分TTCA消旋体、测定TTCA光学纯度的新方法。以正己烷和乙醇或异丙醇为流动相,在DNB-Leucine手性固定相上对TTCA衍生物进行了拆分,并考察了流动相组成和柱温对其衍生物分离的影响,获得较优分析条件,分离因子大于1.2。非手性试剂苯胺柱前衍生化法测定(R)-TTCA的光学纯度与旋光度方法比较,结果一致,相对偏差小于1.34%。     

复合Fe2O3纳米粒子的高分子微球的结构表征

近年来，复合有机、无机粒子的高分子微球及其特殊性质越来越引起人们的兴趣与关注［1］．获得有机、无机复合微球的方法很多，如在无机粒子存在下的乳液或无皂乳液聚会[2，3]，通过可聚合的表面活性剂在粒子表面形成胶囊化层[4]以及共沉淀法等[5]．这些无机粒子包括氧化钛、氧化铁、氧化铝及氧化硅等．Haga等[6]增发现包覆在聚合物粒子中的CdS与其本体的光电性质不同；单分散的聚合物微球可以在基片上被组装成二维乃至三维有序的结构[7]．这为信息存储、立体印刷等领域提供了新途径．因此，将无机粒子与聚合物复合成为功能化粒子是一项有…     

2-(N'-乙基咔唑-3'-烯基)-8-羟基喹啉的合成及理论研究

设计合成了2-(N'-乙基咔唑-3'-烯基)-8-羟基喹啉. 以UV-Vis, ¹H NMR, FT-IR, 元素分析和MS进行了结构表征, 并测定了产物的光致发光(PL)性质. 运用Gaussian98量子化学程序包, 采用B3LYP密度泛函(DFT)的方法, 在6-31G(d,p)水平上对分子的几何构型进行结构优化; 预测目标产物的振动光谱, 结果表明与实验值相符.     

HCN及其氢加成物分子间氢键问题的量子化学研究

采用量子化学(MNDO、CNDO/2)方法,探讨了HCN、H_2CNH和H_3CNH_2分子间的N…H-C氢键的构成。计算表明:HCN-HCN分子间氢键作用较强,支持了实验结果。HCN及其氢加成物H_2CNH、H_3CNH_2等分子间的氢键作用依次减弱,其随C≡N、C=N、C-N的差异而变化,碳氮链中氮原子的作用是构成N…H-C型氢键的一个决定性因素。     

Complete assignments of 1H and 13C NMR data for 10 phenylethanoid glycosides

Ten phenylethanoid glycosides, including two new ones, isolated from the aerial parts of the mangrove plant Acanthus ilicifolius were identified. The first complete assignments of the 1H and 13C NMR chemical shifts for these glycosides were achieved by means of 2D NMR techniques, including 1H-1H COSY, TOCSY, HSQC and HMBC spectra.     

SYNTHESIS, STRUCTURE AND ELECTROCHEMICAL STUDIES ON SINGLE MoFe_3S_4 AND WFe_3S_4 CUBANE-TYPE CLUSTER COMPOUNDS*

Single cubane-like clusters, MFe_3S_4(R_2dtc)_5 (M=Mo, R_2=—(CH_2)_4—, Bz_2; M=W, R_2=Me_2, —(CH_2)4—; dtc=dialkyldithiocarbamate) were synthesized by assembly reaction of (NH_4)_2MS_4 (M=Mo, W), FeCl_2 with R_2dtcNa (or NH_4) in DMF. The structure, IR, EPR and cyclic voltammogram are described and discussed. MoFe_3S_4(C_4H_8dtc)_5 was also obtained from the conversion of linear cluster Fe(DMF)_6[(FeCl_2)_2MoS_4] in the presence of C_4H_8dtc NH_4. Both clusters MoFe_3S_4(C_4H_8dtc)_4·2C_2H_5CN and WFe_3S_4(C_4H_8dtc)_5·2DMF crystallize in the monoclinic space group C2/c with a=12.544(2), (Mo-cluster), 12.533(4) (W-cluster); b=20.478(4), 20.121(6); c=19.582(7), 19.659(2);β=102.82(2), 102.96(3)°; and Z=4, 4. Their structures were refined to R=0.057 and 0.064 with use of 2690 and 2179 reflections (ι>3Q(I)), respectively. Many similarities in structure for Mo and W clusters indicate that both Mo and W play a very similar role in the clusters.     

球形钴酸锂的乳液法合成及其结构、性能研究

采用一种特殊乳液法, 制备了锂离子电池正极材料球形LiCoO₂. 分别研究了一次颗粒尺寸、烧结时间对于二次造粒的影响. 还对LiCoO₂球体内部的结构进行了SEM和HRTEM研究, 发现一次颗粒非常紧密地融合在一起, 晶体边界区域没有明显的非晶相区, 也没有纳米级别的孔洞、裂缝. 电化学性能研究表明, 在900 ℃烧结4 h的材料具有较高的首次放电容量(143 mAh•g^－1)和良好的循环性能     

MgFe2O4-Fe2O3纳米粉体的软化学合成及电磁学特性

Nano-MgFe₂O₄-Fe₂O₃ magnetic powders were synthesized by citrate gel under microwave irradiation. The structure，particle size distribution，electromagnetic characteristics of nano-MgFe₂O₄-Fe₂O₃ were characterized by using TG-DTA, X-ray, electronic microscope, nano-size measurement and electromagnetism measurement apparatus。The results show that the product is a mixture of MgFe₂O₄ and Fe₂O₃ with average size of 44 nm, tanδ for the product is 0.265 and 0.610 at frequency of 1.0 GHz and 1.8 GHz respectively.