Study of the effect of laser treatment on the initial oxidation behaviour of Al‐coated NiCrAlY bond‐coat

In this study, the initial oxidation behaviour of laser‐treated Al/NiCrAlY bond‐coat is investigated. Two approaches, (i) Al film sputtering on the surface of bond‐coat and (ii) laser treatment, have been taken to enhance the oxidation resistance of NiCrAlY bond‐coat. Experimental results showed that after laser treatment, the Al/NiCrAlY bond‐coat exhibited a columnar dendritic microstructure without cracks and voids. A dense and continuous α‐Al₂O₃/Cr₂O₃ multilayer was found to form on the bond‐coat surface. Results on the cyclic oxidation at 1200 °C (for time ≤ 204 h) revealed that the laser‐treated Al/NiCrAlY bond‐coat exhibited better oxidation resistance compared to as‐sprayed NiCrAlY, Al/NiCrAlY and laser‐remelted NiCrAlY bond‐coat. The formation of θ‐Al₂O₃, NiO, Cr₂O₃ and NiCr₂O₄ spinel oxides was observed to be suppressed due to the preformed α‐Al₂O₃ scale during initial oxidation on the surface of laser pre‐oxidized Al/NiCrAlY bond‐coat. Copyright © 2013 John Wiley & Sons, Ltd.     

Fe2O3/Al2O3氧载体用于甲烷化学链燃烧：负载量与制备方法的影响

以不同方法制备了系列Fe₂O₃/Al₂O₃氧载体,采用XRD、H₂-TPR、CH₄-TPR、O₂-TPD和BET等分析技术对氧载体进行了表征。研究了不同Fe₂O₃负载量氧载体的甲烷化学链燃烧性能,考察了不同制备方法对Fe₂O₃/Al₂O₃氧载体结构、反应性和产物选择性的影响。结果表明,Fe₂O₃负载量对氧载体活性及产物中CO₂选择性的影响较大,负载量较低时氧载体活性较低且引起甲烷部分氧化产物CO含量增加。制备方法亦对氧载体与甲烷的反应活性有所影响,整体上共沉淀法制备的质量分数60％Fe₂O₃/Al₂O₃氧载体具有较高的氧化活性和化学链循环稳定性。其在反应温度850℃、反应时间15 min、30次循环后甲烷转化率及产物中CO₂选择性均未见明显降低。     

碱液后处理对纳米ZSM-5沸石孔道和酸度的影响

采用XRD、N2物理吸附、NH3-TPD以及TEM、IR和NMR手段,系统研究了NaOH碱液后处理对低硅铝比纳米ZSM-5沸石(Si/Al摩尔比为14.5、晶粒度为20～50 nm)孔道和酸度的影响.结果表明,在碱液中,低硅铝比纳米ZSM-5沸石主要发生限域脱硅,而且低硅铝比纳米ZSM-5沸石的碱液脱硅难度大于高硅铝比沸石.但在适当的碱液处理条件下(碱硅比为0.19～0.35,温度为60～80℃,处理时间为2～5 h)可以在其晶体内产生大量介孔,增加比表面积和孔容;同时增加弱酸和中强酸的浓度,并提高L酸比例.L酸的大量增加主要是由于产生了裸露的骨架铝(≡Alδ+),这与文献的观点有所不同.     

Electrochemical behavior in simulated body fluid of TiO2 nanotubes on TiAlNb alloy elaborated in various anodizing electrolyte

The present study is focused on tailoring the morphology of TiO₂ nanotubes obtained on Ti6Al7Nb alloy and evaluating their electrochemical behavior in simulated body fluid. The presence of the α and β phases on the Ti6Al7Nb alloy leads to a two‐scale organization of the nanotubes on the samples – which in turn affects the electrochemical stability. Furthermore, five different types of TiO₂ nanotubes were obtained in various electrolytes (e.g. Generation I, a mixture of Generation II and Generation III, Generation III). Electrochemical behavior analysis of all obtained nanotubes morphologies was composed of Tafel plots, cyclic voltammetry and electrochemical impedance spectroscopy and was correlated with morphology data obtained from SEM (nanotubes diameters from top‐view and nanotube length from cross‐section view). The electrochemical results showed that morphological modifications of the Ti6Al7Nb alloy's surface by electrochemical anodizing have induced changes to the electrochemical behavior of the material, evident in the corrosion rates. Copyright © 2014 John Wiley & Sons, Ltd.     

以类水滑石为前驱体的Cu/ZnO/Al2O3催化剂用于COx加氢合成甲醇：CO在反应混合物中的作用

近年来,催化CO₂加氢合成甲醇被视为有望解决温室效应和燃料枯竭的有效途径。目前,铜基催化剂因具有较高的反应活性被广泛应用于工业生产。然而,竞争逆水煤气变换反应产生的CO导致甲醇选择性较低,同时副产物水引起Cu发生不可逆烧结,进而降低甲醇产率。众所周知,CO能够调整分子的表面竞争吸附和活性位的氧化还原行为,本工作拟向原料气中掺入具有还原性的CO以抑制逆水煤气变换反应和防止表面氧化中毒。另一方面,通常认为铜基催化的CO₂加氢制甲醇是结构敏感性反应,不同的前驱体能够显著影响催化剂结构和形貌,进而影响催化活性。因此,我们首先通过共沉淀法和蒸氨法制备了含有类水滑石前驱体(CHT-CZA)和复合物前驱体(CNP-CZA)结构的Cu/ZnO/Al₂O₃催化剂。随后,为探究CO掺杂后反应机理,在250 ℃,5 MPa的反应条件下,含有不同比例CO的原料气中(CO₂:CO:H₂:N₂ = x:(24.5 - x):72.5:3)评价两种催化剂对甲醇合成的性能。评价结果显示两种催化剂反应性能趋势相同,随着CO含量增加,CO₂转化率和STY_H2O不断降低,STY_MeOH逐渐增加。X射线光谱(XPS)显示随CO含量增加,催化剂表面还原性Cu比例增加。评价和表征结果说明CO引入抑制了逆水煤气变换反应的发生,通过还原被H₂O氧化的活性Cu表面,促使更多的活性Cu位点暴露参与甲醇合成。另一方面,透射电镜(TEM)显示掺杂的CO会过度还原而引起颗粒团聚,导致催化剂逐渐失活。相比之下,含有水滑石前驱体的催化剂在任何气氛下均表现出更加优越的反应性能和长周期稳定性。这可归因于类水滑石前驱体独特的片层结构通过结构限域作用有效避免了因CO过度还原而导致的金属颗粒团聚,从而减少活性位点损失。     

A Review on Coordination Properties of Al(III) and Fe(III) toward Natural Antioxidant Molecules: Experimental and Theoretical Insights

This review focuses on the ability of some natural antioxidant molecules (i.e., hydroxycinnamic acids, coumarin-3-carboxylic acid, quercetin, luteolin and curcumin) to form Al(III)- and Fe(III)-complexes with the aim of evaluating the coordination properties from a combined experimental and theoretical point of view. Despite the contributions of previous studies on the chemical properties and biological activity of these metal complexes involving such natural antioxidants, further detailed relationships between the structure and properties are still required. In this context, the investigation on the coordination properties of Al(III) and Fe(III) toward these natural antioxidant molecules might deserve high interest to design water soluble molecule-based metal carriers that can improve the metal’s intake and/or its removal in living organisms.     

Interface formation of Al2O3 on n‐GaN(0001): Photoelectron spectroscopy studies

Al₂O₃ insulator layers were deposited step by step by the physical vapor deposition (PVD) method onto gallium nitride in the wurtzite form, n‐type and (0001)‐oriented. The substrate surface and the early stages of Al₂O₃/n‐GaN(0001) interface formation were characterized in situ under ultra‐high vacuum conditions by X‐ray and ultraviolet photoelectron spectroscopy (XPS, UPS). The electron affinity (EA) of the substrate cleaned by annealing was 3.6 eV. Binding energies of the Al 2p (76.0 eV) and the O 1s (532.9 eV) confirmed the creation of the Al₂O₃ compound in the deposited film for which the EA was 1.6 eV. The Al₂O₃ film was found to be amorphous with a bandgap of 6.9 eV determined from the O 1s loss feature. As a result, the calculated Al₂O₃/n‐GaN(0001) valence band offset (VBO) is ?1.3 eV and the corresponding conduction band offset (CBO) 2.2 eV.     

O2 dissociative adsorption on the Cu‐, Ag‐, and W‐doped Al(111) surfaces from DFT computation

The O₂ adsorption and dissociation on M‐doped (M = Cu, Ag, W) Al(111) surface were studied by density functional theory. The adsorption energy of adsorbate, the average binding energy and surface energy of Al surface, and the doping energy of doping atom were calculated. All the doped atoms can be stably combined with Al atoms, while being slightly embedded in the surface to a certain depth. The TOP‐type surfaces are the most stable doped surfaces for O₂ adsorption, which is related to the orbital hybridization between the adsorbate and the surface atoms, the electronegativity, and the orbital energy level of the doping atoms. Moreover, the O atoms and doping atoms contribute significantly to the density of states (DOS), especially the O‐p orbital electrons and the d orbital electrons of doping atoms. The degree of O₂ dissociation is related to the doping atoms on Al surfaces, and the doping atoms actually resist the dissociation of O₂. W atoms have the best resistance effect on the O₂ dissociation as compared with Cu and Ag atoms, especially W‐1NN surface, which has both large barrier energy and reaction energy.     

High-resolution transmission electron microscopy study on reversion of Al2CuMg precipitates in Al–Cu–Mg alloys under irradiation

Image deconvolution analyses showed that reversion of S-Al₂CuMg precipitates occurred in an Al–Cu–Mg alloy during high-resolution transmission electron microscopy observations. A fraction of Mg and Cu atoms in the precipitates diffused into Al matrix due to electron beam irradiation at 300 kV, resulting in structural/chemical reversion of the precipitates. The structural reversion of the S-Al₂CuMg precipitates is closely related with irradiation-induced displacement of atoms. The strong attraction between Cu and Mg atoms might assist the sub-threshold displacement of Cu atoms. One transitional structure is determined to be S′′-Al₁₀Cu₃Mg₃, a precursor of S-Al₂CuMg. Two other transitional structures, Al₃CuMg and Al₁₈Cu₅Mg₅ which have the same lattice parameters of a = c = 0.405 nm as that of S′′-Al₁₀Cu₃Mg₃, but different b values, are suggested.     

Ca9Al(PO4)7∶Eu2+的发光、浓度猝灭及温度稳定性

采用高温固相法制备了Ca9Al(PO4)7∶Eu2+蓝色荧光粉,研究了Ca9Al(PO4)7∶Eu2+的发光、浓度猝灭及温度稳定性.Ca9Al(PO4)7∶Eu2+的激发光谱覆盖200～350 nm紫外区;发射光谱为一主峰位于445 nm的宽谱,对应Eu2+的4f6 5d1--→4f特征跃迁.研究发现,随Eu2+掺杂量的增大,Ca9Al(PO4)7∶Eu2+的发射强度呈现先增大、后减小的变化趋势,最大发射强度对应的Eu2+掺杂量为0.01,即存在浓度猝灭效应,对应的机理为电偶极-电偶极相互作用;依据晶格常数,得出临界距离为2.297 nm.在25～300℃范围内改变光谱测量温度,发现温度升高到150℃时,Ca9Al(PO4)7∶Eu2+的发射强度变为25℃时的81.0％,对应的激活能为0.268 eV,说明材料具有较好的温度稳定性.