四核钴羰基簇合物Co4(CO)8(μ-CO)2(μ4-PSR)2的合成和晶体结构

The title compounds Co4(CO)8(μ-CO)2 (μ4-PSR) [R=-CH3, -C2H5, -C(CH3)3,-(CHa)4CH3] were synthesized by the reaction of Co2(CO)8 with RSPCl2. They were characterized by IR, 1HNMR, elemental analysis. The crystal and molecular structure of Co4(Co)8(μ-CO)2 (μ4-PSC2H5) has been determined by single crystal diffraction method. Crystal data: monoclinic, space group P21 /c, with a=8-445(3), 6=8.562(3), c= 17.125(6)Å, β=104.26 (3)' 9 V=1200.1Å3, Z=2, Dc=1.937gcm-3. Its molecular structure contains an octahedral Co4P2 skeleton which consists of a rectangular four cobalt atoms core and the Co4 core is capped above and below by two quadruply bridging PSR ligands.     

具有超大通道结构的介孔氧化硅柱层状钛酸的合成和催化应用初探

A mesoporous (d=2.3mm) silica-pillared layered tetratitanate with a super gallery (d₀₀₁=1.84mm)was prepared by first preswelling layered tetratitanate with n-dodecyl amine, then reacting with 20wt% NH₂(CH₂)₃Si(OC₂H₅)₃ aqueous solution, and finally calcinating the resultant solid product in air at 550℃. All the reaction was carried out hydrothermally in an autoclave at 130℃. The obtained material has a relatively high BET surface area of 204m²·g^-1 and a thermal stability beyond 600℃. The catalytic application of the material was also investigated by using the dehydration of isopropanol and the reform of n-hexane as two probing reactions.     

钴铬水滑石的合成及表征

采用共沉淀法合成了一系列不同Co/Cr物质的量比的碳酸根型水滑石。用X－衍射、红外光谱、差热、热重、分光光度等方法对其组成和结构进行了研究。结果表明Co/Cr投料比为2到3时能形成结晶度好、纯度高的水滑石。初步推测了部分产物的组成及所含水滑石的化学式。     

重铬酸钾氧化偶氮胂Ⅲ褪色催化光度法测定痕量钴的研究

在醋酸－醋酸钠缓冲介质中痕量钴（Ⅱ）对重铬酸钾氧化偶氮胂Ⅲ褪色反应有显著的催化作用，催化反应的表现活化能为２５．６２ｋＪ．ｍｏｌ＾－１，据此建立了测定痕量钴的催化动力学分析法，线性范围为０～３５０ｎｇ．ｍＬ＾－１，检出限为２．０ｎｇ．ｍＬ＾－１（Ｃｏ），除Ｆｅ（Ⅱ）外，其余常见共存离子基本不影响钴的测定，本法重现性较好，用于测定人发，茶叶，土壤和废水中钴的含量，结果满意。     

植入用Co—Cr—Mo合金与Ti—6Al—4V合金的电偶腐蚀研究

组件式设计常被用地人工髋关节，钴络钼合金（Ｃｏ－Ｃｒ－Ｍｏ）与钛合金（Ｔｉ－６Ａｌ－４Ｖ）的压配最常用，本文应用电化学方法研究了静态条件下两种合金的电偶腐蚀行为，浸泡实验表明，钴络钼合金为阳极，但电偶电流与其维钝电流相近，并无明显加速度腐蚀效应，钛合金为阴极，受到保护，失重及金相观察结果显示，在４５天的浸泡实验周期内，未发现腐蚀痕迹，混合电位理论和电位处于两种合金的钝化电位区，电偶电流为合金的维钝     

过渡金属大环配合物的研究Ⅲ 4-硝基-苯并15冠-5与钴(Ⅱ)、铜(Ⅱ)和银(Ⅰ)配合物的合成及性质

有关冠醚配体与碱金属,碱土金属和稀土离子形成配合物的特性研究,国内外均有报导,但冠醚与d-过渡金属离子配合物的研究工作,则开展较晚,文献报导亦甚少。本文为探讨4-硝基-苯并15冠-5(No_2·B15C15)与过渡金属离子的配位能力,合成了Co(Ⅱ),Cu(Ⅱ),和Ag(Ⅰ)与4-硝基-苯并15冠-5配合物。并进行了元素分析,X-射线衍射,红外光谱,摩尔电导,激光拉曼光谱及差热-热失重分析的研究。     

稀土对化学镀Co-B合金工艺和结构的影响

研究了稀土金属铈对化学镀Co-B合金工艺和结构的影响. 结果表明, 微量稀土加入镀液后, 能改善电化学催化和金属离子的还原, 能明显提高化学镀Co-B合金的沉积速度、静止电位和阴极过电位. 稀土还降低了镀层中类金属元素硼的含量, 提高了形核率, 降低了形核功, 使沉积层结晶细化, 并且使具有非晶态结构的化学镀Co-B合金转化成了微晶结构的化学镀Co-B-Ce合金.     

铁酸钴纳米微粒的共沉淀法制备和磁性质(英)

The cobalt ferrite nanoparticles were prepared by coprecipitation in the presence of poly (N-vinylpyrrolidone) (PVP) and characterized by XRD, TEM, EDX and magnetometry. XRD results suggest the formation of pure cobalt ferrite. The mean particle sizes of CoFe₂O₄ samples annealed at 400 ℃ and 600 ℃ were ca. 6 and 25 nm, respectively as obtained by transmission electron microscopy (TEM). The magnetic measurements indicated that nano-particles obtained at 400 ℃ were superparamagnetic while that prepared at 600 ℃ were ferrimagnetic.     

新的含有4-对甲基苯基-3，5-二(2-吡啶基)-1，2，4-三氮唑钴配合物的合成和晶体结构(英)

A new cobalt(Ⅱ) complex, [CoL₂(NCS)₂]·2CH₂Cl₂, [L=4-(p-methylphenyl)-3,5-bis(pyridin-2-yl)-1,2,4-triazole], was synthesized and its crystal structure was determined by X-ray analysis. The complex crystallizes in monoclinic system with space group P2₁/c, a=0.867 40(17), b=1.453 9(3), c=1.781 9(4) nm, β=91.18(3)°, V=2.246 7(8) nm³ and Z=2. The cobalt atom is in a distorted octahedral environment with two bidentate chelating L ligands in the equatorial plane and two NCS^- ions in the axial positions. CCDC: 251658.