染料敏化太阳能电池对电极La2Mo2O7复合MWCNTs非Pt催化剂的制备与性能

通过高温固相法对醋酸镧（C₆H₉O₆La·xH₂O）与高钼酸铵（（NH₄）₆Mo₇O₂₄·4H₂O）在一定条件下热解制备非Pt催化剂La₂Mo₂O₇（La₂O₃-2MoO₂）。进一步采用2种方法将La₂Mo₂O₇与多壁碳纳米管（MWCNTs）进行复合,一种是将La₂Mo₂O₇喷涂到MWCNTs表层之上得到La₂Mo₂O₇/MWCNTs,另一种是将两者均匀混合掺杂得到La₂Mo₂O₇@MWCNTs,再将上述2种复合材料应用于染料敏化太阳能电池对电极进行相应研究。通过扫描电子显微镜（SEM）表征了复合催化材料的微观形貌,X射线衍射（XRD）确定了微观结构。采用电流密度-光电压曲线、循环伏安,交流阻抗以及塔菲尔极化分析了材料的光电性能。实验结果表明在电解液I₃^-/I^-中,基于La₂Mo₂O₇/MWCNTs与La₂Mo₂O₇@MWCNTs的对电极,相同的条件下在光电池中获得的光电转换效率分别为6.09%和4.84%,明显高于MWCNTs的3.94%和La₂Mo₂O₇的0.87%。电极性能的提高可归因于La₂Mo₂O₇复合催化剂相对大的比表面积和高导电性。     

铕配合物共掺杂电致发光器件效率滚降的延缓

将Alq₃[tris(8-hydroxyquinoline)aluminium]和Eu(TTA)₃phen(TTA=thenoyltrifluoroacetone,phen=1,10-phenanthroline)共掺杂进入主体材料CBP(4,4’-N,N’-dicarbazole-biphenyl)中,我们制作并研究了一系列电致发光器件。经过优化Alq₃的掺杂浓度,在不改变色纯度的情况下,器件的效率滚降被大幅降低并获得了近乎加倍的最大亮度。发光层中的Alq₃分子不仅促进了电子的注入和传输,还延缓了空穴的传输。借助电致发光光谱,我们证实Alq₃分子作为阶梯加速空穴从CBP分子到Eu(TTA)₃phen分子的迁移,从而促进了电子和空穴在Eu(TTA)₃phen分子上的平衡。因此,我们认为器件的效率滚降受到抑制的原因有两点：一是复合区间的加宽,二是Eu(TTA)₃phen分子上空穴和电子的分布更加平衡。     

骨架结构多孔TiO2薄膜增强染料敏化太阳能电池性能

以空心球状TiO₂为基体、以片状TiO₂为骨架,采用刮刀法制备了染料敏化太阳能电池的多孔TiO₂光阳极薄膜。光电转化效率测试结果表明,当作为骨架支撑材料的片状TiO₂含量为20wt%时,光阳极薄膜组装成太阳能电池的光电转化效率达到最高值4.53%,比商业P25制备的无孔无骨架TiO₂薄膜电池(4.06%)及无骨架结构的多孔TiO₂薄膜电池(4.17%)的性能均有显著提高。当片状TiO₂的最佳含量为20wt%电池薄膜厚度为33 μm时,太阳能电池光电转化效率进一步提升为7.06%。光电性能增强的原因是骨架结构有利于快速传输电子并增大染料吸附量。本研究通过设计制备具有骨架结构的多孔TiO₂薄膜为提高染料敏化太阳能电池性能提供了新的思路。     

Improved Photovoltaic Performance of MEH-PPV/PCBM Solar Cells via Incorporation of Si Nanocrystals

We have studied the effect of silicon nanocrystals （SiNCs） as a third component on performance of organic bulk heterojunction solar cells composed of poly[2-methoxy,5-（2＇-ethylhexyloxy）-l,4-phenylene vinylene] （MEH- PPV）：[6,6]-phenyI-C61-butyric acid methyl ester （PCBM） blend film. By adding suitable amounts of SiNCs into MEH-PPV：PCBM blend, the device performance such as external quantum efficiency, short circuit current density （Js（）, and power conversion efficiency （PCE） improved. Incorporation of 2.5% SiNCs in the blend led to 13.6% improvement of Jsc, which in turn resulted in 18% improvement of PCE up to 2.28%. The improved performance was mainly due to the improvements both in the charge generation from the interface of MEH-PPV/SiNCs and the charge collection at the cathode.     

聚合物光伏材料与器件研究进展

高效率的聚合物太阳电池依赖于光吸收活性层材料对太阳光能量的充分利用．电极界面材料将光吸收活性层产生的空穴和电子分别快速高效地抽取到阳极和阴极,并通过进一步改进光伏器件的结构提升能量转换效率和稳定性．本课题组在光吸收活性层中新型聚合物给体材料、新型电极界面材料、利用水／醇性电极界面材料制作新型倒装器件结构的太阳电池方面取得重要进展,推动了太阳电池在能量转换效率和稳定性方面的突破．     

MgO脱除HCN的动力学研究

研究了MgO在不同温度下对HCN的脱除作用,并用XRD对反应后固相产物进行分析。研究了温度、MgO质量分数、HCN初始体积分数和停留时间等因素对HCN脱除效率的影响,并求出MgO与HCN反应的动力学参数。结果表明,673 K时,MgO已经开始与HCN发生反应,当温度高于873 K时,HCN中气态"N"已转化到固相产物MgCN₂中;HCN脱除效率随温度、MgO质量分数和停留时间的增加呈线性增加,但随HCN初始体积分数增加呈负幂函数的规律下降;MgO与HCN的反应级数α为0.72,表观活化能E为32.2 kJ/mol。     

山核桃蒲壳中单宁的提取、检测及其缓蚀性能研究

用响应面法优化山核桃蒲壳中单宁的提取工艺,对单宁类型进行鉴定,还对单宁在HCl溶液中对冷轧钢的缓蚀作用进行探索。通过定性实验,证实山核桃蒲壳中含有缩合类单宁。运用Box-Behnken中心组合实验和响应面法考察了乙醇体积分数、提取时间、提取温度3个因素对单宁提取率的影响,优化提取条件为:乙醇体积分数65%,提取时间61 min,提取温度52℃。在此条件下,单宁提取率为6.73%。失重缓蚀实验结果表明,在酸洗时间为2～12h、酸洗温度20～50℃、HCl浓度0.2～1.0mol/L条件下,单宁提取液有一定的缓蚀作用,但缓蚀率不高。若通过与乌洛托品复配,缓蚀率均可提高到97%以上。     

2-巯基苯并噻唑对铜缓蚀行为的表面增强红外光谱研究

2-巯基苯并噻唑(MBT)是Cu的高效缓蚀剂,但是缓蚀机理存在较大争议.本文通过电化学极化曲线从宏观角度对缓蚀效率进行评估,并利用原位衰减全反射-表面增强红外光谱技术结合理论计算研究了电位控制下的微观吸附构型.结果表明:在较高电位(大于0 V,相对饱和甘汞电极(SCE))下,MBT和金属Cu之间发生电子转移,MBT以硫醇式的环外S和N与金属Cu(I)离子配位在表面形成聚合物膜;在较低电位(小于0 V,vs SCE)下,MBT通过环外S原子以硫醇离子形式在金属Cu表面直立吸附.表面膜阻止了腐蚀介质的侵蚀,起到了较好的缓蚀效果.     

UltiMate 3000 DGLC双三元液相色谱的串联色谱技术特点

当样品使用梯度洗脱时,每次分析结束之后,常需较长时间重新平衡或清洗色谱柱。在此过程中,进样器、柱温箱和检测器则处于闲置状态,这无疑是一种资源浪费。若能将此清洗和平衡过程与分析下一个样品同时进行,则可充分利用资源并可提高分析效率。赛默飞Ulti Mate 3000 DGLC双三     

应用于染料敏化太阳能电池的基于染料R6的含有不同吸电子基团的有机染料的理论研究

Dye-sensitized solar cells (DSSCs) are the most promising alternatives to traditional fossil energy because of their advantages of low production cost, facile structure, relatively low environmental impact, relatively high photoelectronic absorption efficiency, and overall high efficiency. In addition, several studies on sensitizers as vital components have been conducted over the last three decades. Compared to metal dyes, metal-free organic dyes have been considered as promising candidates because of their simple fabrication, multiple structures, high molar absorption coefficients, easily tunable properties, and environmental friendliness. In this study, we systematically investigated the optoelectronic properties of six metal-free organic donor-acceptor dyes (RD1–6) derived from the known dye R6 by using the density functional theory (DFT) and time-dependent DFT methods. Cell performance parameters were discussed, including the geometrical and electronic structures, absorption spectrum, adsorption energy, light harvesting efficiency (LHE) curve, predictive short circuit current density (J_sc^Pred.), predictive open circuit voltage (V_oc^Pred.), and theoretical power conversion efficiency (PCE). Results revealed that all the designed dyes exhibited high theoretical PCE. In particular, dyes RD1, 2, and 4–6 showed greater conjugations, and dyes RD1–3 had smaller energy gaps than those of the reference dye. In addition, dyes RD1–3, 5, and 6 exhibited better light harvesting capacities that covered the entire visible region and extended to the near-infrared region with obviously red-shift maximum absorption wavelengths (λ_max), wider LHE curves, and higher J_sc^Pred. as compared to the reference dye. It was critical that dyes RD1 and 2 not only have greater conjugations and narrow band gaps but also good light harvesting capacities with more than 56-nm red-shift maximum absorption wavelengths and broadened LHE curves than those of the reference dye. Notably, mainly because of an average increment of 12.0% of J_sc^Pred., a remarkable increment of the theoretical power conversion efficiency was observed from 12.6% for dye R6 to 14.1% for dyes RD1 and 2. Thus, dyes RD1 and 2 exhibited superior cell performances and could be promising sensitizer candidates for highly efficient DSSCs. These results could be used to guide effective synthetic efforts in the discovery of efficient metal-free organic dye sensitizers in DSSCs.