5-羟色胺在碳纤维微电极上的电化学测定及伏安行为研究

本文研究了5 羟色胺在Na2HPO4 KH2PO4(pH6.0)缓冲溶液中,于自制的碳纤维微电极上的伏安行为。在此缓冲溶液中5 羟色胺有一对氧化还原峰,峰电位分别为0.2V和0.4V。峰电流与5 羟色胺的浓度分别在4.0×10-6～4.0×10-5mol/L和5.0×10-6～5.0×10-5mol/L范围内呈良好的线性关系,检出限分别为4.70×10-6mol/L和1.76×10-6mol/L。同时利用多种电化学方法求出了动力学参数。     

酞菁锰-表面活性剂薄膜电极的电化学表征及其对三氯乙酸的电化学催化作用的研究

将酞菁锰（ＭｎＰｃ）掺入阳离子表面活性剂双十二烷基二甲基溴化铵（ＤＤＡＢ）的氯仿溶液，并涂布于热解石墨电极表面，待氯仿挥发后即制得ＭｎＰｃ－ＤＤＡＢ薄膜电极。循环伏安实验表明，在ＫＢｒ溶液中，该薄膜电极有两对还原氧化峰，第一对峰的Ｅｐｃ１＝－０．２７Ｖ，Ｅｐａ１＝０．０１Ｖ；第二对峰的Ｅｐｃ２＝－０．７６Ｖ，Ｅｐａ２＝－０．６２Ｖ（ｖｓ．ＳＣＥ）。本文着重探讨了第二对峰的电化学行为，估计了该体系的电荷传递扩散系数Ｄｃｔ和表观非均相电极反应速率常数Ｋ０′等电化学参数，并可将该薄膜电极用于催化三氯乙酸的电化学还原。     

离子液体在导电高分子中的应用

综述了离子液体作为介质，在导电高分子合成及其电化学性能测试，以及导电高分子电化学器件中（电化学电容、发光电化学池、驱动器、太阳能电池）的最新研究进展。在此基础上。展望了离子液体在导电高分子中的应用前景。     

钍试剂Ⅱ及铍(Ⅱ)-钍试剂Ⅱ电化学行为的研究——Ⅰ.铍(Ⅱ)-钍试剂Ⅱ配合物吸附电流的研究和应用

本文研究了铍(Ⅱ)-钍试剂Ⅱ在EDTA、二苯胍、氨-铵缓冲溶液(pH9.5)中的电极行为和电流性质,并对有关机理进行了探讨。提出痕量铍的测定方法,线性范围为0.0005～0.1μg/ml。检出限为0.2ngBe(Ⅱ)/ Ml。用于煤飞灰中铍的直接测定,操作简单,结果满意。     

Nanostructure Pt Electrode Obtained via Self-assembly of Nanoparticles on Conductive Oxide-coated Glass Substrate

Self-assembly of platinum nanoparticles were applied to fabrication of counter electrode for dye-sensitized solar cells on conductive oxide-coated glass substrate. The present Pt electrode exhibits high exchange current density of 220 mA/cm^2, which is comparable to those prepared by electrodeposition, magnetron sputtering or thermal decomposition of platinum chloride. After analysis by transmission electron microscopy (TEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS), it was found that the catalyst was structurally characterized as nanosized platinum metal clusters and was continuously arranged on electrode surface. The present nanostructure electrode had high electrocatalytic activity for the reduction of iodine in organic solution.     

溶剂对固相反应法制备H7PW12O42掺杂聚苯胺的影响

利用固相反应法,分别以微量的水和乙腈作为溶剂,制备了磷钨酸(H7PW12O42)掺杂聚苯胺,并以红外光谱(FTIR),电子扫描显微镜(SEM),X射线衍射(XRD),循环伏安(cyclic voltamogram)等测试方法对聚苯胺进行了表征。结果表明,固相反应法合成的聚苯胺分子链排列有序,晶化率较好,并且表现出有较好的电化学稳定性。而以微量的乙腈作为溶剂通过固相反应法得到的磷钨酸掺杂聚苯胺在颗粒形貌、结晶性、导电率等方面均优于相同条件微量的水作为溶剂时的掺杂聚苯胺。     

掺银的Sm0.5Sr0.5CoO3中温固体氧化物燃料电池复合阴极材料的制备与性能研究

采用硝酸盐分解方法在Sm0.5Sr0.5CoO3 (SSC)中掺入少量的银 (Ag), 形成可用于SOFC的多孔阴极材料 (SSC-Agx). 通过X射线衍射测试确定了材料的物相组成; 用SEM观测了中温电解质Ce0.8Sm0.2O1.9表面涂层电极的微结构; 利用电化学极化曲线和阻抗谱研究了这些材料中低温 (500～800 ℃)电化学性能, 确定掺Ag量和烧结温度对阴极电化学性能的影响. 结果表明, SSC在中温区掺20% Ag时具有最佳的电化学性能, 在600 ℃阴极总阻抗是SSC的1/11, 在750 ℃为SSC的1/4, SSC中掺Ag是提高阴极在中温区电化学性能的有效途径.     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.