Formation Mechanism and Orderly Structures of an Iron Film System Deposited on Silicone Oil Surfaces

A new iron film system,deposited on silicone oil surfaces by vapour phase deposition method,has been fabricated and its formation mechanism as well as orderly structures has been studied,It is found that the formation mechanism of the films obeys a two-stage growth model,which is similar to that to the other metallic films on liquid substrates,Large and orderly structures are observed in the continuous iron films.The experiments show that the orderly spatial structures result from the local material gathering in these nearly free sustained films.     

Richards模型在蔬菜生长预测中的应用

本文从 Richards模型的数学表达出发 ,阐述了模型中各参数初始值的确定以及优化过程 .并利用菜花和菠菜的试验数据建立其“最优”生长模型 .     

具有新光学性质的Zn-Zn2SiO4纳米同轴线阵列

采用气相沉积技术在Si衬底上生长了Zn-Zn₂SiO₄芯-壳结构纳米同轴线阵列。根部呈笋状的纳米同轴线,直径约100nm,长度可以超过10μm;同轴线芯直径约50nm、壳层厚约25nm。通过X射线衍射的表征以及能量色散谱的线扫描,确定纳米同轴线的芯为Zn,壳层为Zn₂SiO₄。我们提出了一种新的生长机制,同时也为生长均匀的纳米同轴线提供一种新的技术。观察阴极荧光谱发现,纳米同轴线有三个主要发光带:强度最大的中紫外300nm发光、较弱的可见光区560nm以及红外谱区865nm的发光。对纳米同轴线截面的300nm发光峰观测发现,中紫外发光来源于Zn₂SiO₄壳层。正是这种同轴线的结构,使得其具备特殊的光学性质。     

MOCVD生长的GaN单晶膜透射光谱研究

采用MOCVD技术在Al2O3(0001)衬底上生长了GaN薄膜，使用透射光谱、光致发光光谱和X射线双晶衍射三种技术测试了五类GaN薄膜样品，实验结果表明：GaN薄膜透射谱反映出的GaN质量与X射线双晶衍射测量的结果一致，即透射率越大，半高宽越小，结晶质量越好；而X射线双晶衍射峰半高宽最小的样品，其PL谱的带边峰却很弱，这说明PL谱反映样品的光学性能与X射线双晶衍射获得的结晶质量不存在简单的对应关系，同时还报导了一种特殊工艺生长的高阻GaN样品的RBS／沟道结果。     

分子束外延生长赝配高电子迁移率超高速微结构功能材料里深中心识别

应用深能级瞬态谱(DLTS)技术研究分子束外延(MBE)生长的highelectronmobilitytransistors(HEMT)和Pseudomorphichighelectronmobilitytransistors(PHEMT)结构深中心行为.样品的DLTS谱表明,在HEMT和PHEMT结构的nAlGaAs层里存在着较大浓度(1015-1017cm-3)和俘获截面(10-16cm2)的近禁带中部电子陷阱.它们可能与AlGaAs层的氧含量有关.同时还观察到PHEMT结构晶格不匹配的AlGaAsInGaAsGaAs系统在AlGaAs里产生的应力引起DX中心(与硅有关)能级位置的有序移动.其移动量可作为应力大小的一个判据,表明DLTS技术是定性识别此应力的可靠和简便的工具. 关键词： 分子束外延生长 高电子迁移率超高速微结构功能材料 深中心     

Reduction of Dislocations in GaN Epilayer Grown on Si （111） Substrates using a GaN Intermedial Layer

GaN intermedial layers grown under different pressures are inserted between GaN epilayers and AIN/Si（111） substrates. In situ optical reflectivity measurements show that a transition from the three-dimensional （3D） mode to the 2I） one occurs during the GaN epilayer growth when a higher growth pressure is used during the preceding GaN intermedial layer growth, and an improvement of the crystalline quality of GaN epilayer will be made. Combining the in situ reflectivity and transmission electron microscopy （TEM） measurements, it is suggested that the lateral growth at the transition of growth mode is favourable for bending of dislocation lines, thus reducing the density of threading dislocations in the epilayer.