搅拌器内部流动的无网格法三维数值模拟

本文将移动粒子半隐式法(MPS)的基本算法由二维扩展至三维。将圆柱坐标系引入到初场粒子的布置中,避免了在笛卡儿坐标系下处理不规则形状(如斜边或曲边)问题时粒子初场布置困难和精确度较低的问题,改善了对计算边界条件表达的精确性。引入移动边界模型,对直叶片搅拌器的内部流动进行了三维数值模拟。还提出了一种新的初始粒子布置简易方法,明显简化粒子初始布置时的复杂程度,提高了对三维复杂几何形状问题的可操作性。     

矩形毛细微槽横截面上气液分界面形状理论分析

对背面有热流输入的矩形毛细微槽群横截面上的气液分界面形状进行了理论分析,在一定条件下对Wayner蒸发模型进行简化,根据等壁温条件推出蒸发薄液膜区域热流密度近似为定值,通过流体动力学理论推导出了微槽横截面薄液膜区域液膜厚度变化的关系式,并与Wayner蒸发模型的计算结果进行了比较。进一步提出了全新的交界线区域长度的判定方法,根据蒸发薄液膜区域总换热量计算得到蒸发薄液膜区域的长度,交界处接触角,以及固有弯月面区域的曲率半径,从而最终得出了微槽横截面整个气液分界面的形状曲线,理论分析表明:槽宽、热流密度、过热度等因素对蒸发薄液膜区域长度、接触角以及固有弯月面曲率半径等参数有较大的影响。     

����DSP�������޻���������Ƶ����ϵͳ����

介绍了三相无环流交交变频控制系统设计的控制原理及其DSP控制系统硬件和软件的具体设计,并给出了在搭建的主回路平台上进行整体调试的结果。在其DSP控制系统的驱动控制下,三相交交变频器能输出频率为0~15Hz电流和电压波形,电流无环流死区时间为1.2ms,调试结果显示所研制的DSP三相交交变频数字控制系统具有较高的控制精度和实时性。     

Dressed Four-Wave Mixing Spectroscopy Modified by Polarization Interference and Atom-Wall Collision in Micrometric Thin Cells

Dressed four-wave mixing （DFWM） spectroscopy is investigated theoretically in some micrometric thin cells. It is found that DFWM spectra can be modified by polarization interference of atoms and transient effects induced by atom-wall collision. This modification can lead to width-narrowing of DFWM lines and facilitates to implement experiment of high resolution DFWM spectroscopy in a confined atomic system.     

Numerical Investigation on Inviscid Instability of Streaky Structures in Incompressible Boundary Layer Flow

Numerical investigation is made on the effect of streaky structures in transition by inviscid linear disturbance equation with temporal mode. Several disturbances with different streamwise wave numbers were induced, and the evolutions with time step were received. It suggests that the exponential growth and periodic variation of the waves are in existence. As the streamwise wave number increases, the disturbance growth rate begins by increasing, reaches a maximum at around α=0.4 with a disturbance frequency of 0.2186 ＋ 0.001457i, and then decreases. Furthermore, the eigenfunctions of pressure disturbance are plotted.     

Optimal Capacity Allocation on Heterogeneous Complex Transport Networks

We study how the node delivering capacity is allocated so that the traffic transport efficiency can be enhanced maximally. Network heterogeneity of degree distribution and processing delay of the traffic are considered. An explicit analytical solution is provided, which is based on the M/M/1 queueing theory and optimization principle, provided that the network structure and routing strategy are given. In particular, we extend the relevant conclusions in the literature [Europhys. Lett. 83 （2008） 28001]. Finally, an order parameter simulation example by comparing results with those obtained via simple capacity allocation in large Barabasi—Albert （BA） scale-free network is provided to illustrate the effectiveness of the theoretical results.     

Theoretical and Experimental Investigation of Flexural Wave Propagating in a Periodic Pipe with Fluid-Filled Loading

Based on the Bragg scattering mechanism of phononic crystals （PCs）, a periodic composite material pipe with fluid loading is designed and studied. The band structure of the flexural wave in the periodic pipe is calculated with the transfer matrix （TM） method. A periodic piping experimental system is designed, and the vibration experiment is performed to validate the attenuation ability of the periodic pipe structure. Finally, a finite-element pipe model is constructed using the MSC-Actran software, and the calculated results match well with the vibration experiment. The errors between the theoretical calculation results and the vibration experimental results are analyzed.     

Condensation of Self-Driven Particles in Scale-Free Networks

A new simple model of self-driven particles in scale-free networks is introduced to understand the emergence of condensation in the natural world. In the model, at each time step, particles are driven to choose their next habitats according to the particle numbers at both the present habitats and neighbors. It is found that the hub effect results in the condensation. The present numerical results as well as the theoretical analysis of condensation transition show the criterion of condensation. Both simulations and theoretical analysis display that there are three phases for different hopping probabilities δ： non-condensation （δ〈δc）, partial condensation （δc≤ δ〈1）, and complete condensation （δ≥δc＇= 1）, and the mean occupation particle number at the stationary state is also obtained. Moreover, the noise effect on self-driven particles is studied, and it makes particle numbers at nodes tend towards being identical.     

Change in Continuous Detonation Wave Propagation Mode from Rotating Detonation to Standing Detonation

We perform a three-dimensional numerical simulation based on a one-step chemical reaction model to investigate changes in the mode of H2-Air detonation wave propagation from rotating detonation wave （RDW） mode to standing detonation wave mode. The physical characteristics of an RDW with injection velocity of 500 m/s are analyzed to investigate the physical mechanisms involved. We find that with increasing injection velocity, the detonation wave gradually changes from perpendicular to the head wall to parallel to the head wall. When the injection velocity exceeds the Chapman-Jouguet velocity VCJ （about 1984 m/s）, the detonation wave changes orientation to become perpendicular to the fuel injection direction, and the rotating mode changes accordingly to a standing mode. Finally, the plane detonation characteristic triple-wave structures can be found from the standing mode.     

近红外光谱技术用于无创生化检验研究的进展

20世纪90年代初,近红外光谱技术在人体无创生化检验方面的潜力逐渐获得重视。然而,人体是一个极其复杂多变的检测对象,因此虽然各研究小组在实验模拟和离体分析方面取得了一定成果,但在临床应用上始终没有实质性突破。文章讨论了目前阻碍近红外光谱技术实现临床意义上的人体无创生化检验的关键问题,即信号微弱、组织背景干扰、血流容积变化问题。将国际上现有的近红外无创生化检验研究工作的思路按照分析方法大致归为两类,即经典近红外分析法和扣除组织背景干扰分析法。详细介绍了这两类研究思路各自的研究现状,并认为在现有条件下第二类思路更有希望取得临床可以应用的结果。