γ干扰素免疫电极及其响应机理的研究

在醋纤维孔膜上利用溴化氰固定了马抗人γ干扰素抗体。抗体膜经竞争性温育反应后置于碘离子选择电极上而构成免疫电极; 另一碘电极与参比膜作为参比电极。测定了电极在0.1mmol.dm^-3KI+4.4mmol.dm^-3H2O2+0.1mol.dm^-3柠檬酸盐,PH5.0缓冲液中响应电位, 研究了温度反应时间、电解液组成等因对电极响应影响,提出了电极向应线性化方法, 并得到了实验验证。     

熔体快速冷凝过程的微观结构演化

采用分子动力学模拟技术研究了金属间化合物AuCu3熔体的双体分布函数、键对、多面体、配位数等在快速凝固条件下随温度的变化情况，详细考察了AuCu3中微观组团随温度的演化特点.结果表明，AuCu3熔体降温至700 K时双体分布函数的第二峰已发生劈裂，液态金属中已经产生了非晶态；同时液体中的键对数及多面体数与温度的关系都表明，在上述向非晶转变的过程中，AuCu3熔体的确发生了微观结构组态的变化，其中以液体中的缺陷多面体随温度变化最为剧烈.     

Rapid—In—situ Determination of Chromium （VI） in Water Using Modified Diphenylcarbazine with Citrate

In recent years, the determination of Cr (VI) has attracted great attention because of its toxicity to human, plants and animals1-5. Usually, in the industrial waste water, the concentration of Cr (VI) is relatively high and should be determined frequently. So, an accurate, quick, and convenient method for the measurement of Cr (VI) in environmental water, as well as in river, lake, sea and tap water, is of great importance. The method for determination of Cr (VI) by diphenylcarbazine …     

杨村烟煤快速液化反应性的研究

用共振搅拌反应器研究了杨村烟煤的高温快速液化。研究发现，在体系保持较高活性氢浓度时，适当提高反应温度，缩短反应时间——在短时间内达到较高的煤转化率,即高温快速液化是可行的。高温快速液化的最佳反应温度正是热重曲线反映的煤活泼热解温度范围的上限。从液化产物看，高温快速液化反应产物中苯可溶物占绝大多数，这对于煤液化产物的进一步利用非常有利。     

高速分析四十年

1 高速分析的产生从总体上看,分析化学是帮助我们获得物质的化学组成和结构信息的科学.服务于不同领域的分析化学,由于分析对象的不同,带来了具体分析要求的差异.于是产生了具有各自特征的工业分析化学、农业分析化学、临床分析化学等许多分支.而在生产技术发展的进程中对分析化学的要求也不断地变化和提高.作为服务于工业生产的分析化学一工业分析化学的重要性主要表现在对产品的质量控制.50年代初,我国大力发展钢铁工业,为了配合冶炼工艺和保证钢铁产品的质量,要求解决炉前快速分析问题.上海材料研究所早在1954年就确定以解决这一问题作为研究工作的主要方向,并取得积极成果.     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method北大核心CSCD

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

硅铝钡铁合金中主元素的快速系统分析方法

硅铝钡铁合金是一种目前较为广泛采用的炼钢脱氧剂，用光度法测定硅和钡、用强碱分离滴定法测定铝已见报道，本文提出了该合金中硅、铝、钡三元素系统测定的新方法，用强碱溶样、过氧化氢氧化、盐酸酸化后制取母液。分取母液，分别用硅钼蓝差示光度法测定硅；用偶氮胂-DBS光度法测定钡；     

Microwave-assisted Preparation of Temperature Sensitive Poly（N-isopropylacrylamide） Hydrogel with Improved Responsive Properties

Poly(N-isopropylacrylamide) (PNIPAM) hydrogel, which is insoluble but shrinkable or swellable in aqueous media when temperature rises or drops across 33oC1,2, has been extensively studied due to its potential applications in the fields of controlled drug …     

快速酯化气相色谱法分析山苍子中的脂肪酸

快速酯化气相色谱法分析山苍子中的脂肪酸许鸿生，周巧龙（湘潭大学化学系湘潭４１１１０５）关键词气相色谱法，山苍子种子油，脂肪酸，快速酯交换山苍子是一种木本油料植物，我国山苍子油资源丰富，为了合理开发利用，本文分析了其脂肪酸成分。有关山苍子种子油脂肪酸成...