超声雾化进样微波诱导等离子体原子吸收光谱法测定银的某些影响因素研究

本文将超声雾化技术与MIP-AAS联用,以“L”型吸收管代替“T”型吸收管作为AAS测量的吸收池,采用水冷凝和浓H_2SO_4吸收相结合去溶,研究TUSN-MIP-AAS方法测银时的某些影响因素,讨论了微波前向功率,载气流速、去溶系统、溶液酸度、共存离子及易也离元素等对吸收信号的影响,本法所得的测银的特征浓度为0.01μg/ml(328.1nm)和0.03μg/ml(338.3nm),相对标准偏差为7.5％.     

微波辐射下4-(4-羟基-3-甲氧基)苯基-3,3,6,6-四甲基-1,8-二氧代1,2,3,4,5,6,7,8,9,10-十氢吖啶的合成和晶体结构

标题化合物C24H29NO4?1/2C2H5OH稨2O)由香兰素、5,5-二甲基-1,3-环己二酮、醋酸铵在微波辐射下干反应并经95%乙醇重结晶而得C24H29NO4穀2(C2H5OH稨2O)晶体。结构通过单晶X-射线衍射法确定,其晶体属单斜晶系,空间群P21/n, a = 9.810(2), b = 14.516(3), c = 17.008(3) ? b = 101.03(2), V = 2377.2(8) ?, Z = 4, Mr = 427.52, Dc = 1.195 g/cm3 , m(MoKa) = 0.082 mm-1, F(000) = 920。晶体结构用直接法解出,经全矩阵最小二乘法对原子参数进行修正,最终的偏离因子为R = 0.0406, wR = 0.0892。X-射线衍射分析结果表明,吡啶环和与之稠合的2个六员环均为信封式构象。     

中草药中有机磷及氨基甲酸酯类农药残留量的GC-MS测定

气相色谱-质谱法同时测定中草药中多种有机磷及氨基甲酸酯类农药残留量.采用V(乙腈)∶V(丙酮)＝3∶7混合溶剂微波辅助提取,弗罗里硅土和中性氧化铝层析柱净化,气相色谱-质谱(GC-MS)联用检测,农药混标在0.01～1.0 μg/mL范围内线性良好,在0.5、0.1、0.05 μg/mL 3个水平添加平均回收率分别为86.5%～110.6%、81.2%～108.3%和72.9%～122.3%,相对标准偏差分别为2.6%～8.3%、4.6%～9.7%和2.3%～10.7%.     

Structureal Study of Inclusion COmplex of Adrographolide with β-Cyclodextrin Prepared under Microwave Irradiation

An inclusion complex of β-cyclodextrin with andrographolide (Andro) was prepared by using a convenient method of microwave irradiation.The structure of the inclusion complex was determined by the ^1H NMR,2D NMR spectroscopy as well as the elemental analysis.     

醋酸根介质中单分散BaTiO3的水热制备

醋酸根介质中单分散ＢａＴｉＯ_３的水热制备吴明，李理（中山大学化学系，广州５１０２７５）（青岛化工学院物理系，２６６０４２）徐如人（吉林大学化学系无机水热合成开放实验室，长春１３００２３）均细粉体材料不仅能改善陶瓷材料的烧结性能和显微结构［１］，并且?..     

微波化学

本文从微波的概念、微波的产生、传输及其加热原理和主要特点出发，简单介绍微波技术在化学中的应用。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

水热法制备纳米TiO_2及其在水相介质中分散性的研究

以硫酸法钛白粉生产工艺的中间体偏钛酸为原料,采用水热法制备了纳米TiO2粉体。研究了磷酸、硫酸、反应温度及反应时间对TiO2粉体的晶型、粒径及形貌的影响,考察了其在水相介质中的分散性。并借助XRD、SEM、动态激光粒度分析仪和动电位及静态激光粒度分析仪对其进行了表征。     

三种化学方法合成K0.5Bi0.5TiO3粉体的机理比较

采用溶胶-凝胶法、水热法和溶胶-凝胶-水热法三种化学方法合成K_0.5Bi_0.5TiO₃ (KBT)无铅压电陶瓷粉体. 用X射线衍射(XRD)分析产物的结构, 用扫描电镜(SEM)和透射电镜(TEM)观察产物的形貌. 实验结果表明, 三种化学方法均可获得纯钙钛矿相KBT粉体, 但不同工艺获得的粉体在形貌和生成机制上有很大的不同. 溶胶-凝胶法属高温固相扩散机制, 需要700 ℃以上温度煅烧才可获得KBT纯相, 且粉体颗粒度大、团聚严重. 水热法符合溶解-结晶机制, 生长出四方形的KBT纳米片. 溶胶-凝胶-水热法利用了凝胶团聚体空间链状结构的模板作用, 通过原位结晶机制生长出KBT纳米线.     

Synthesis and Crystal Structure of 3,3,6,6-Tetramethyl-N-hydroxy-9-ethyl-1,8-dioxo-1,2,3,4,5,6,7,8,9,10-decahydroacridine

1 INTRODUCTION 1,4-Dihydropyridines (1,4-DHPs) are well-knowncompounds because of their pharmacological pro-perty as calcium channel modulators[1, . The che- 2]mical modifications, such as the introduction of dif-ferent substituents[3, or heteroatoms[5], of the DHP 4]ring have allowed the expansion of researches onthe structure-activity relationship to gain new in-sights into the molecular interactions at the receptorlevel. In fact, it is well established th…