拉科酰胺的合成工艺改进

以N-Boc-D-丝氨酸为起始原料,经羟基甲基化、与苄胺的酰胺化、脱除Boc保护基和胺基乙酰化4步反应合成了拉科酰胺(1),总收率76.0%,其结构经1H NMR和MS表征。在关键中间体(R)-N-苄基-2-N-Boc-氨基-3-甲氧基丙酰胺的合成中,以三乙胺代替N-甲基吗啉作为缚酸剂,以氯甲酸异丙酯代替DCC为缩合剂,有效降低了合成成本。     

Non-isothermal Decomposition Mechanism and Kinetics of LiClO4 in Nitrogen

The non-isothermal decomposition kinetics of LiClO4 in flow N2 atmosphere was studied.TG-DTA curves show that the decomposition proceeded through two well-defined steps below 900°C,and the mass loss was in agreement with the theoretica1 value.XRD profile demonstrates that the product of the thermal decomposition at 500°C is LiCl.For the decomposition kinetics study,the activation energies calculated with the Friedman method were considered as the initial values for non-linear regression and were used for verifying the correctness of the fitted models.The decomposition process was fitted by a two-step consecutive reaction:extended Prout-Tompkins equation[Bna,f (α) is (1?α)nα a] followed by a 1th order reaction(F1).The activation energies were (215.6±0.2) and (251.6±3.6) kJ/mol,respectively.The exponentials n and a for Bna reaction were (0.25±0.05) and (0.795±0.005),respectively.The reaction types and activation energies were in agreement with those obtained from the isothermal method,but the exponentials were optimized for better fitting and prediction.     

Estimation of Critical Temperature of Thermal Explosion for Trinitromethyl Explosives by Non-isothermal DSC

Two general expressions and their six derived formulae for estimating the critical temperature(Tb) of thermal explosion for energetic materials(EMs) were derived from the Semenov’s thermal explosion theory and eight non-isothermal kinetic equations via reasonable hypothesis. We can easily obtain the values of the initial temperature(T0i) at which DSC curve deviates from the baseline of the non-isothermal DSC curve of EMs, the onset temperature(Tei), the exothermic decomposition reaction kinetic parameters and the values of T00 and Te0 from the equation T0i or ei=T00 or e0+α1βi+α2βi2+···+αL–2βiL–2, i=1, 2, ···, L and then calculate the values of Tb by means of the six derived formulae. The results obtained with the six derived calculating methods for six trinitromethyl explosives: bis(2,2,2- trinitroethyl-N-nitro) ethylene diamine(BTNEDA), 2,2,2-trinitroethyl-4,4,4-trinitrobutyrate(TNETB), bis(2,2,2- trinitroethyl) formal(BNTF), bis(2,2,2-trinitroethyl-nitramine)(BTNNA), 2,2,2-trinitroethyl-2,2,2-trinitroethyl-N- nitroamino acetate(TNTNNA) and tetrakis [2,2,2-trinitroethyl] orthoester(TTNOE) agree well with each other.     

表面活性剂增敏动力学光度法测定痕量钴(Ⅱ)

研究了在十二烷基二甲基氧化胺(OB-2)活化下,Co(Ⅱ)催化过硫酸钠氧化甲基紫的褪色反应,并建立了甲基紫褪色催化动力学光度法测定痕量Co(Ⅱ)的新方法。该法测定波长为580nm,线性范围为0.05～3.00μg/25mL,相关系数r=0.9992。检出限为2.0×10-9g/mL,最大相对标准偏差为1.67%,回收率为98.1%～102.3%。     

大鼠服用朱砂后脑内氨基酸类递质含量的变化

研究了朱砂对大鼠脑组织中氨基酸类神经递质含量的影响.将32只Wistar大鼠随机分为低、中、高剂量组和对照组,朱砂灌胃给药14天后,采用高效液相色谱法测定大鼠脑组织中谷氨酸(Glu)、天门冬氨酸(Asp)、甘氨酸(Gly)、γ-氨基丁酸(GABA)和牛磺酸(Tau)的含量,并计算兴奋毒性指数(EI)的变化.与对照组相比较,脑组织中氨基酸类神经递质含量均呈下降趋势,其中Asp和Gly的中、高剂量组差异有统计学意义(P0.05),Tau和GABA的高剂量组有统计学差异(P0.05),Glu和EI所有剂量组均有统计学差异(P0.05).朱砂对氨基酸类神经递质具有一定的抑制作用.     

硫代二草酰二(3,5-二甲基嘧啶)锰配合物的合成及其与DNA的相互作用

以4,6-二甲基-2-巯基嘧啶和草酰氯为原料合成了硫代二草酰二(3,5-二甲基嘧啶)(L)及其锰配合物;采用红外光谱、紫外光谱、核磁共振谱对其结构进行了表征,同时研究了锰配合物与DNA的相互作用.结果表明,锰配合物的阳离子与DNA磷酸基团的氧负离子形成静电结合.     

金属铜配合物催化氧化1-(3,4-二甲氧基苯)乙醇的动力学研究

合成了1-(3,4-二甲氧基苯)乙醇(DMPE)作为木质素模型物,并用初始速率法研究了40℃时在pH6.5～8.5磷酸缓冲溶液中N,N-双(2-乙基-5-甲基-咪唑-4-亚甲基)乙醇胺合铜、N,N-双(2-(2-羟乙基胺基)乙基)草酰胺合铜和5,7,12,14-四甲基-1,4,8,11-四氮杂环十四-4,7,11,14-四烯合铜催化氧化1-(3,4-二甲氧基苯)乙醇的动力学,提出了1-(3,4-二甲氧基苯)乙醇氧化反应动力学模型,并由此计算出不同pH值条件下催化反应动力学参数k2和Km.铜配合物的催化活性随着pH的增大而增大.具有大共轭体系的配体催化剂表现出更好的催化活性.提出并讨论了H2O2氧化DMPE的催化氧化反应机理.     

H_3PO_4/Zr(OH)_4高效促进NBS对取代烷基苯的亲电溴代

使用固体酸H3PO4/Zr(OH)4催化NBS对取代烷基苯进行苯环溴代反应.根据不同取代烷基苯的反应活性,在乙腈中,高产率(79%～96%)地得到了相应的苯环单溴代产物,同时反应体系中无苄位溴代的副产物生成.在反应过程中,固体酸催化剂可以重复使用多次.     

阿司匹林-蒙脱土-壳聚糖缓释微球的制备及其体外释放性能

利用溶液法预先制备壳聚糖(Cs)-蒙脱土(MMT)复合材料(Cs-MMT),以Cs-MMT、Cs为原料,采用反相悬浮聚合法制得一种新型药物缓释体系阿司匹林-蒙脱土-壳聚糖载药微球(Asp-MMT-Cs)。采用FT-IR、SEM表征了Cs-MMT和Asp-MMT-Cs载药微球的结构及形态;设计正交实验优化了Asp-MMT-Cs载药微球的制备工艺;通过体外释放实验探讨了载药微球在不同模拟释放液中的释药规律。结果表明:所得微球球形度好,粒径分布较均匀;最优工艺制得的载药微球平均粒径为81.20μm,载药量为9.61%,包封率为76.78%。该缓释体系具有pH敏感性,更倾向于在pH较高的磷酸盐缓冲溶液中释放。     

PEEK复合材料的降解动力学

石墨、碳纤维和聚四氟乙烯(PTFE)填充的聚醚醚酮(PEEK)具有自润滑作用,是高性能的复合材料。采用热失重分析仪研究了聚醚醚酮及其复合材料的热降解行为,用Kissinger方法和Ozawa方法计算了复合材料的反应活化能(Ea)。与PEEK相比较,自润滑PEEK复合材料具有更高的降解反应活化能和更低的反应速率常数(K)。