超高效液相色谱法测定原料乳中的水杨酸

建立了原料乳中水杨酸的检测方法.样品经乙腈提取，采用超高效液相色谱进行测定.在ZORBAX Eclipse Plus C18反相柱上分离，梯度洗脱，流动相为磷酸水和磷酸甲醇，DAD检测.水杨酸的线性范围为0.5~20 μg/mL，相关系数平方（R²）大于0.995，检出限为0.5 mg/kg，定量限为1.25 mg/kg，3个不同水平的加标回收率为88.0%~118.9%，相对标准偏差不大于10%.方法具有操作简单、重现性好、灵敏度高、杂质干扰小等特点，可以用于原料乳中水杨酸的检测.     

二氧化碳电化学还原的研究进展

利用低品阶的可再生电能,将二氧化碳(CO_2)电化学还原生成高附加值的化学品或燃料,既可以"变废为宝"、减少CO_2排放,又能将可再生能源转变为高能量密度的燃料储存,具有重要的现实意义。电化学还原CO_2的研究,是目前世界范围内的研究热点,许多标志性的重要研究成果不断涌现。本文首先简要介绍了CO_2电化学还原的基本原理,然后概述了近5年来在其电催化剂材料和反应机理相关的实验与理论研究方面的昀新研究进展,昀后对其发展趋势进行了展望。     

Non-surfactant synthesis of mesoporous silica with dye as template

A novel non-suffactant method was described to synthesize mesoporous silica using dye basic fuchsin as template.Chemical reactions were introduced into the formation of mesopores rather than the weak electrostatic or hydrogen-bonding interactions in the traditional surfactant routes.The reactant composition was found to be crucial to the pore structure of objective product.The formation mechanism of mesopore was also proved.     

The Erosion and Erosion Products of Tungsten and Carbon Based Materials Bombarded by High Energy Pulse Electron Beam

High Z and low Z materials are both the candidate plasma facing materials (PFM), up to now, the typical representative of high Z materials is tungsten, and the representatives of low Z materials are carbon materials (such as graphite, C/C composite) and beryllium. Most of these materials have been used as PFM limiters and diverter armor tiles of tokamak machines, tungsten, molybdenum and C/C composite are always used as high heat flux components.     

可再生能源的开发与利用

为了人类持久的能源供应及日益严重的环境问题，由石化能源逐步过渡到以再生能源为主的时代终将来临。本文简单介绍了新能源在我国发展的优势、条件及目前的发展状况。     

9项原料乳及乳制品检测方法获认定

围绕乳制品安全生产，河北省科技厅加强质量安全控制关键技术研究，先后启动“华北农区高产奶牛良种繁育体系建立与奶业规模化生产技术研究”和奶制品检测技术、产品的研发项目10余项。     

Effects of BaF2 on Preparing Mullite with Sludge from the Aluminum Profile Factory and Pyrophyllite

In this study, sludge from the aluminum profile factory and pyrophyllite were used as major raw materials to prepare mullite. Through determining optimum formula, the optimum calcination temperature and optimum temperature retention time as well as the effects of BaF2 mineralizer on the crystal structure, microstructure and properties of mullite were studied and the optimum BaF2 mineralizer dosage was determined. With XRD and SEM methods, the crystal structure and microstructure of each sample were characterized. With Rietveld Quantification method, crystal phase content in each sample was determined and properties of each sample were tested. Based on the comprehensive analysis result, it was determined that optimum BaF2 dosage was 0.5%, the fairly good calcination temperature was 1550 ℃, and the corresponding mullite solid solution content was 95.8%.     

锐钛型TiO2性能研究Ⅰ.影响化纤钛白原料性能的因素

ＴｉＯ２能使带有强烈脂肪光泽的化学纤维得到永久性的消光，这类特殊ＴｉＯ２称为化纤钛白。考虑到化纤钛白用途的特殊性，化纤中只能用锐钛型ＴｉＯ２，同时对化纤钛白要求白度高、在水中具有很高的分散性、在乙二醇中大于５μｍ的凝聚粒子要少。化纤钛白作为钛白的专用...