HL－1装置中LHCD和等离子体参数的关系

本文研究了在ＨＬ－１托卡马克的不同放电阶段的低混杂波驱动特性。给出了驱动电流及驱动效率和等离子体参数，如电子平均密度ｎｅ、等离子体电流Ｉｐ及纵向磁场的关系。也给出和分析了波驱动和入射波功率的关系。在放电平段，对正反向驱动效率进行了研究和比较。     

CX_2(NO_2)_2(X=H,F,C1)分子旋转势和构型稳定性的ab initio研究

本文用ab initio计算方法,采用STO-3G基组,对二硝基卤代甲烷CH_2(NO_2)_3(1),CF_2(NO_2)_2(2);CCl_2(NO_2)_2(3)等分子作了单点计算,研究其旋转势能.全构型优化研究了五个具有对称性构型的结构和稳定性,并作了理论分析和探讨.     

Decomposition of the Two Lowest Lamb modes in a Bonded Plate

Based on the expression of the dispersion equation of Lame waves in an adhesive two-layered plate pressented in our proevious paper [Chin,Phys,Lett,18(2001)1483],the two lowest Lamb modes,the symmetric mode S0 and the antisymmetric mode A0 are successfully decomposed in the low-frequency regime,Relations between the rigidity of the bond and the velocity of the two Lamb modes are found,which lay a foundation for the estimation of the bond rigidity of the adhesive plate.The influence of the variations of the bond rigidity in terms of the stiffness constants KN and KT of the spring model on the velocity of the two Lamb modes in discussed and numerically evaluated.numerical results indicate that the deterioration of the bond rigidity causes the phase velocity decrease for Lamb modes of the two lowest order,thus having a possibility for the evaluation of the bonding state of the adhesive plate by using ultrasonic wave velocity measurement.     

热处理对V-4Ti合金氦的滞留与热解吸行为的影响

钒合金由于其低中子诱导的放射性和良好的高温性能被认为是未来聚变堆很有希望的第一壁和结构材料。因为氦可以通过放电清洗和中子嬗变产生，氦的滞留与热释放行为将是钒合金在聚变堆应用的重要课题。A．V．Veen领导的研究小组用1keV的氦离子注入到10^13-10^14He／cm^2的剂量研究了钒合金的氦俘获和热解吸机理以及预退火处理的影响。两群热解吸峰被发现，他们认为一个对应于氦，空位一杂质链，另一个对应于氦，带有钒合金原有的缺陷，如细小的析出物所俘获。既然钒合金原有的缺陷与退火处理有关，热处理对氦在钒合金中的滞留的影响是可以预期的，并且已被实验所证实。     

Three Stilbene Tetramers from the Roots of Caragana sinica

Three stilbene tetramers, carasinols A-C (1-3), along with three known substances, leachianol C, cararosinol A and stenophyllol B, were isolated from the roots of Caragana sinica. Their structures were elucidated by spectroscopy. It was found that compounds isolated except for stenophyllol B stimulated the proliferation of cultured osteoblasts.     

氘代聚合物膜靶制备技术与性能研究

 氘代聚合物膜是快点火基础物理实验的一种重要靶型。通过氘代苯乙烯单体的本体自由基聚合反应制备氘代聚苯乙烯，并利用流延法和浇铸法制备出厚度从几十nm到数百μm的膜靶。溶剂挥发过程中的随机扰动对膜厚均匀性造成影响，采用清洁的基片和在涂沫基片或模具外加防护罩可以降低这种影响。采用PVA作脱膜剂有利于获得较薄的聚合物薄膜。DSC分析表明薄膜的玻璃化转变温度与热处理过程有关，缓慢退火有利于提高Ｔ-g和储能模量。     

分光光度法测定环境水样中的汞

研究了氯磺酚偶氮硫代若丹宁 ( HSCT)与汞的显色反应 ,在醋酸介质中 ,HSCT与汞反应生成 2∶ 1稳定络合物 ,λmax=5 4 5 nm,ε=5 .66× 10 4 L· mol-1· cm-1。汞含量在 0— 2 .5μg/ m L范围内符合比耳定律 ,本方法可用于水样中痕量汞含量的测定     

Measurements of Boundary Plasma in Synergy Discharges of IBW and LHCD on the HT-7 Tokamak

By applying ion Bernstein wave (IBW) heating into the lower hybrid current drive (LHCD) plasma, improved confinements have been obtained in the HT-7 tokamak. The central electron temperature was doubled and the storage energy was increased significantly. The core electron density and temperature were broadened and ther profiles near the edge were steepened. A transport barrier has been formed in the vicinity of the limlter radial location. An enhanced shear in poloidal phase velocity was found in the same region with reduction of the fluctuation levels and the coherences between fluctuations. The results suggest that the improved confinement in the IBW and LHCD plasma is at least partially due to the modification of shear in poloidal velocity and then the suppression of fluctuations and fluctuation induced fluxes via de-correlation effect.     

二代树状碳硅烷液晶研究Ⅰ.端基含36个丁氧基偶氮苯介晶基元

用发散法合成周边含36个丁氧基偶氮苯介晶基元(M5)端基新的二代树状碳硅烷液晶(D2),并用元素分析,氢谱,激光质谱,红外,紫外,偏光显微镜,DSC和WAXD法表征.D2为向列相,与M5相同,二代树状物相态由介晶基元相态决定.D2液晶态相行为是K85N107I103N69K,其熔点比M5降低27～41℃,清亮点比M5降低17～18℃,液晶态温区比M5加宽10～23℃.二代碳硅烷(D2)与一代碳硅烷(D1)相比熔点增加2～3℃,清亮点降低26～29℃,液晶态温区减少29～31℃.在二代树状物中观察到S=+3/2的高强向错.