Morphologically controlled synthesis of 1-dimensional selenium dioxide and study of its application as catalyst for diesel fuel additive

In this research work, selenium dioxide (SeO₂) nanorods have been prepared by a solvothermal method in which a strong reducing agent (NaBH₄) was used to reduce precursor salt into SeO₂ nanorods. X-ray diffraction (XRD) technique was applied to observe the crystal structure which confirmed its tetragonal geometry. Moreover, morphology and particle size were studied by scanning electron microscopy (SEM). SEM fully described the 1-dimensional morphology of SeO₂ nanorods which then arranged themselves to create a 3-dimensional flower-like structure with an average particle size of 50 nm. Also, the catalytic activity of SeO₂ nanorods as diesel-additive was studied by defining different parameters such as fire and flash points, calorific value, cloud and pour points, specific gravity, and kinematic viscosity. Subsequently, SeO₂ nanorods proved to be an excellent diesel additive due to higher total heat content and lower value of kinematic viscosity which enhances the better performance of the diesel engine.     

Catalytic air oxidation of ambient temperature hydrocarbons

Catalytic air oxidation of the aliphatic hydrocarbons n-decane, hexanes, gasoline and diesel fuel was conducted at ambient temperature with novel iron catalysts. The concentration of n-decane in water was reduced from 1.42 g in 100 ml to 0.07 g in 100 ml in 5 h at room temperature forming carbon monoxide and water by means of intermediate aldehydes. Results of FT–IR and GC–MS analyses demonstrated formation of aldehydes and unsaturated alcohols. Carbon monoxide was detected on catalyst residues and in the vapor phase. The indicated catalytic reaction mechanisms are discussed.     

The high-temperature durability of Rh-free threeway catalysts used for automoble emission control

The high-temperature durability of cordierite honeycomb Rh-free three-way catalysts (TWC) containing additives has been studied by calcining catalysts at various temperatures in the interval of 600≈1100°C. The three-way performances of these catalysts were evaluated for the reaction of carbon monoxide(CO), hydrocarbon(HC) and nitrogen oxides(NOx) at given conditions by using a fixed bed reactor. The results show that after Rh-free TWC are thermally aged in air at 1100°C for 5h and 950°C for 104 h, the TWC still have better three-way activity compared with Rh-containing TWC.     

Characterization of fuel samples by on-line LC-GC with automatic group-type separation of hydrocarbons

Characterization of fuels by LC-GC is possible by use of automatic successive transfer (multiple transfer) of HPLC fractions to a GC via an on-column interface. This paper describes the instrumentation and the methodology for the HPLC separation of the hydrocarbons (aliphatic and aromatic) into separate groups and the on-line transfer of these groups to a capillary GC column. Two HPLC methods were used with the same valve configuration: single column (silica) with column back-flush to detector; and double column (silica and amino-bonded silica) with multiple fraction transfer and back-flush. The first method was used for the analysis of total saturated compounds and total aromatic compounds; the second was used for the separation of the one-, two-, three-, and four-ring aromatic compounds present in diesel fuels. Examples are shown of the characterization of diesel fuels, and the repeatability of the data.     

纳米CeO2基固溶体催化柴油机碳颗粒物燃烧性能

采用柠檬酸溶胶鄄凝胶法制备CeO2基固溶体催化剂(Ce0.7Zr0.3O2-δ、Ce0.7Pr0.3O2-δ和Ce0.7Gd0.3O2-δ), 并考察了固溶体和三种常用载体(TiO2、SiO2和Al2O3)及其负载KNO3后的催化碳黑燃烧活性. 结果表明, CeO2基固溶体催化剂具有很高的催化燃烧活性, 其活性接近TiO2、SiO2和Al2O3负载30%KNO3催化剂的活性. 因为纳米CeO2基固溶体的形成, 提高了催化剂的抗烧结能力, 使氧更活泼, 从而提高氧化还原性能, 有利于碳颗粒燃烧. 由于CeO2基固溶体本身的高活性, 因此KNO3的添加不能明显提高CeO2基固溶体催化剂(尤其是Ce0.7Zr0.3O2-δ和Ce0.7Pr0.3O2-δ)的催化燃烧活性, 但KNO3能显著提高TiO2, SiO2和Al2O3的催化燃烧活性.     

Nitrotyrosine-modified proteins and oxidative stress induced by diesel exhaust particles

Protein tyrosine nitration is a post-translational modification that occurs under conditions of oxidative stress and may play a role in the pathogenesis of diseases such as asthma. Through their ability to generate reactive oxygen species in macrophages and epithelial cells, particulate pollutants, such as diesel exhaust particles (DEPs), may lead to a worsening of the asthmatic condition. In this study, we looked for evidence of oxidative modification of proteins in RAW 264.7 cell line treated with DEP chemicals. We show that the induction of oxidative stress is accompanied by 53 newly expressed proteins which are suppressed by a thiol antioxidant, N-acetylcysteine. These include antioxidant enzymes, pro-inflammatory components, and products of intermediary metabolism. In addition, inducible nitric oxide synthase (iNOS) was identified as a biologically relevant oxidative stress protein that is induced concurrent with increased NO production and protein tyrosine-nitration in DEP-exposed RAW 264.7 cells. Utilizing two-dimensional gel electrophoresis, anti-nitrotyrosine immunoblotting, and mass spectrometry led to the identification of an additional ten nitrotyrosine modified proteins, including oxidative stress proteins involved in intermediary metabolism (e.g., GAPDH and enolase), antioxidant defense (e.g., MnSOD) and inhibition of proteosomal activity (e.g., Hsp 90alpha). These oxidative proteins may serve as markers for oxidative stress generation in vivo.     

Analysis of nitro-PAHs in diesel exhaust particulate extracts with multicolumn HPLC

Summary A method is described for the determination of nitrated polynuclear aromatic hydrocarbons (nitro-PAHs), in particular 1-nitropyrene, in diesel particulate extracts. The method employs a multidimensional HPLC (column switching) technique with final on-line peak identification by UV-VIS spectral comparison with standards. To achieve exceptional chromatographic selectivity for nitro-PAHs, a new pyrene butyric acid amide phase has been prepared which is capable of forming donor-acceptor complexes with them. With this technique it is possible to confirm the presence of 1-nitropyrene in the range 3–100 ng/mg on filter-collected diesel soot. Its utility was demonstrated with diesel exhaust extracts spiked with varying levels of 1-nitropyrene and proved to be highly selective.Parts of this work have been presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984.Dedicated to Prof. J. F. K. Huber at the occasion of his 60th birthday.     

SOOT combustion. co and k catalysts supported on different supports

The catalytic combustion of particulate material was studied on cobalt catalysts promoted with potassium using different supports for its preparation. Silica, aluminium oxides and hydroxides, zirconium oxide and hydroxide were used as supports. The catalytic activity for combustion depends on the type of support used, the higher activity corresponding to the supported catalyst on zirconium oxide. TPR studies indicate that the interaction metal/support allows to explain the higher activity of the CoK/SiO₂ catalyst with respect to the CoK/Al₂O₃ but the high activity found in CoK/ZrO₂is not explained by this interaction. In all cases the Co and K improved the performance of the catalysts.     

Determination of polycyclic aromatic sulfur heterocycles (PASH) in diesel fuel by high performance liquid chromatography and photodiode-array detection

An oxidation method (sulfone method) for the determination of polycyclic aromatic sulfur heterocycles (PASH) in diesel fuel is presented. The aromatic fraction of a diesel fuel, isolated by solid phase extraction, is oxidized under controlled conditions with hydrogen peroxide. The oxidation products, mainly methylated dibenzosulfone, are determined and quantified directly, without further clean-up, by HPLC with photodiode-array detection.     

Analysis of free and esterified sterols in vegetable oil methyl esters by capillary GC

The introduction of quality standards for vegetable oil methyl esters is gaining in importance due to their increased use as diesel fuel substitutes and as technical products. Free and esterified sterols, the main constituents of the unsaponifiable matter in vegetable oils, are recovered in vegetable oil methyl esters and may influence the technical properties of vegetable oil methyl ester products. A rapid gas chromatographic method for the qualitative and quantitative determination of free and esterified sterols in vegetable oil methyl esters has therefore been developed. The concentration of the free sterols as well as their qualitative and quantitative composition and the concentration of the sterol esters have been determined in rape seed oil methyl ester samples by GC–FID. Prior to analysis, the free sterols were silylated with N,O-bis(trimethylsilyl)trifluoroacetamide with 1% of trimethylchlorosilane; betulinol was used as an internal standard. Calibration was performed by analysis of standard solutions containing β-sitosterol, cholesteryl stearate, and betulinol. The reproducibility of the quantitative results has been evaluated by repeated injections of the same test solution and by repeated complete analysis of the same sample.