接枝和交联对纳米Si02改性NR／PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅（SiO2）改性天然橡胶，聚丙烯共混型热塑性弹性体（NR/PPTPE）．研究了马来酸酐，苯乙烯，过氧化二异丙苯（MAH／St／DCP）多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响，并用SEM分析了TPE的断面形貌．结果表明：纳米SiO2和MAH／St／DCP的最佳质量分数分别为0．03和0．0375／0．0188／0．00375时，MAH／St／DCP接枝、交联改性NR／PP／纳米SiO：TPE的力学性能、耐溶剂性能和耐热变形性能最佳．MAH／St／DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联，使NR与PP两相界面结合强度明显提高，NR／PPTPE的综合性能得到明显的改善．     

Physico-mechanical and free volume behaviour of guar gum filled polyurethane/polyacrylonitrile biodegradable composites

A series of different weight ratios of guar gum viz. 5, 10, 20 and 30 were incorporated into polyurethane/polyacrylonitrile (PU/PAN, 50/50) semi interpenetrating polymer networks (SIPNs) using polyethylene glycol-400, 4,4′-diphenyl methane diisocyanate, acrylonitrile, benzoyl peroxide and new metallic catalyst. The obtained polymer composites were subjected to biodegradation studies using specific fungi Aspergillus niger. The composites are characterized for physico-mechanical properties like density and tensile behaviour of the specimens before and after biodegradation. The positron annihilation lifetime spectroscopy (PALS) was used to monitor the content of free volume before and after biodegradation. The extent of degradation was examined by change in tensile behaviour and surface morphology. The influences of fungi on mechanical and morphological behaviour of filled IPNs are found to be interesting. The free volume changes in the composite systems correlates well with the mechanical properties.     

Chiral imides as potential chiroptical switches: synthesis and optical properties

A series of chiral aromatic imides and diimides were synthesized and their electrochemical, absorption, fluorescent, and chiroptical properties were examined for their potential application as molecular chiroptical switches. These compounds exhibit strong UV-vis absorptions, and can be electrochemically reduced to radical anions that absorb in the near infrared (NIR) region. Further reduction to the dianionic states results in new absorptions in the visible region. The changes in circular dichroism upon redox switching were apparent in the UV-vis region but were absent in the NIR region.     

Stabilization of γ-sterilized biomedical polyolefins by synergistic mixtures of oligomeric stabilizers

The stabilization of polyolefins against γ-sterilization has been studied with single or binary additive system. The present attempt is to utilize synergistic mixtures of stabilizers which are approved for food contact applications. Ethylene-propylene (EP) copolymer has been melt-mixed with hindered amine stabilizers (HAS), phenolic antioxidants and organo-phosphites (hydroperoxide decomposer). Samples were sterilized with different doses of γ-radiation. Stabilization was characterized in terms of changes in the functional groups (oxidation products), tensile properties, yellowing and surface morphology by FTIR spectroscopy, Instron, colorimetry (reflectance) and scanning electron microscopy (SEM), respectively. Results were discussed by comparing the stabilizing efficiency of mixtures with and without phenol system. Among phenol containing systems, where we mostly observe discoloration due to the oxidation of hindered phenol and the combination of secondary HAS, tertiary HAS, organo-phosphite and hindered phenol exhibited improved stabilization efficiency than single or binary additive systems. The mixture of secondary HAS and tertiary HAS, has shown antagonistic effect of stabilization whereas their combination with organo-phosphite has exhibited synergistic effect of stabilization even at higher doses of γ-sterilization. The effects have been explained through the interaction between the stabilizers.     

Dialing in color with rare earth metals: facile photoluminescent production of true white light

Combining polymeric architectures with metal ions produces hybrid materials with extremely rich properties. We are studying polymers containing terpyridine in the side chain. In this report, the chelation of lanthanide ions, Eu³⁺, Tb³⁺, and Dy³⁺ resulted in metal functionalized copolymers that exhibited excellent emission of red, green, and blue light respectively. The polymer architecture easily allows incorporation of all three colors into the material, which leads to the facile production of true white light in solution or the solid state. Quantum efficiencies for the polymer systems were determined. The white light system had an efficiency of 5%. Various combinations of colors were achieved from the basic RBG colors by simply varying the metal ion ratios in the polymer backbone. This easy tuning of the color makes these systems attractive. Copyright © 2007 John Wiley & Sons, Ltd.     

Conduction stability of high-density polyethylene/carbon black composites due to electric field action

Conduction stability of high-density polyethylene/carbon black (HDPE/CB) composites with a CB volume fraction slightly above the percolation threshold is studied in relation to electric field action at various ambient temperatures below the melting point of HDPE. It is found that resistance of the composites shows considerable changes after the electric field is switched off. Influence of irradiation crosslinking of HDPE on the conduction stability is also discussed.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

SYNTHESIS OF BLOCK COPOLYMER FROM 5,6 -BENZO-2-METHYLENE-1,3-DIOXEPANE AND METHYL ACRYLATE VIA ATOM TRANSFER RADICAL POLYMERIZATION

Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1, 3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl α-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) withterminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in theATRP of BMDO. The Structure of block copolymer was characterized by ~1H-NMR spectroscopy. Molecular weight andmolecular weight distribution were determined on a gel permeation chromatograph (GPC).     

Dynamics and rheology of immiscible polymer-liquid-crystal systems

The morphology evolution in immiscible polymer-liquid-crystal systems is quite different from flexible polymer-polymer mixtures due to the anisotropic properties of liquid crystals. The dynamics and rheology of such system are discussed. A theoretical model is proposed to describe the dynamics of liquid-crystal droplets in a flow field and the rheological properties of immiscible liquid-crystal/polymer mixtures. The deformation of liquid-crystal droplet is found to be greatly dependent on the interfacial properties of polymer-liquid crystal. The scaling relationships of interfacial contribution to the stresses are found to be quite different from the isotropic mixtures with droplet morphology.     

The influence of cross-linking agents on ring-opening metathesis polymerized thermosets

The addition of suitable cross-linking agents with norbornene-based monomers has significant effects on the thermal properties of the resulting polymers formed by olefin metathesis. Ethylidene norbornene (ENB) and endo-dicyclopentadiene (endo-DCPD) were mixed separately with various loadings of three different cross-linking agents and then polymerized with the addition of Grubbs’ catalyst. The polymerization kinetics and resulting glass transition temperature (T _g) of the systems were evaluated by differential scanning calorimetry (DSC). The addition of the first cross-linking agent, norbornadiene (CL-1), to both endo-DCPD and ENB resulted in decreasing glass transition temperatures with increasing concentrations. In contrast, the addition of the other two cross-linking agents (CL-2 and CL-3), which were both custom synthesized bifunctional norbornyl systems, to both endo-DCPD and ENB resulted in a monotonic increases in T _g with cross-linker concentration. By tailoring the loading of these custom cross-linking agents, the properties of these polymer systems can be controlled for various applications, including self-healing composites.