Synthesis of optically active poly(N‐propargylsulfamides) with helical conformation

A novel chiral N‐propargylsulfamide monomer ( 1a ) and its enantiomer ( 1b ) were synthesized and polymerized with (nbd)Rh⁺B^?(C₆H₅)₄ as a catalyst providing poly(1) (poly( 1a ) and poly( 1b )) in high yields (≥99%). Poly(1) could take stable helices in less polar solvents (chloroform and THF), demonstrated by strong circular dichroism signals and UV–vis absorption peaks at about 415 nm and the large specific rotations; but in more polar solvents including DMF and DMSO, poly(1) failed to form helix. Quantitative evaluation with anisotropy factor showed that the helical screw sense had a relatively high thermal stability. These results together with the IR spectra measured in solvents showed that hydrogen bonding between the neighboring sulfamide groups is one of the main driving forces for poly(1) to adopt stable helices. In addition, copolymerization of monomer 1a and monomer 2 was conducted, the solubility of poly(1) was improved drastically. However, the copolymerization had adverse effects on the formation of stable helices in the copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 500–508, 2007     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Direct single-layered fabrication of 3D concavo–convex patterns in nano-stereolithography

A nano-surfacing process (NSP) is proposed to directly fabricate three-dimensional (3D) concavo–convex-shaped microstructures such as micro-lens arrays using two-photon polymerization (TPP), a promising technique for fabricating arbitrary 3D highly functional micro-devices. In TPP, commonly utilized methods for fabricating complex 3D microstructures to date are based on a layer-by-layer accumulating technique employing two-dimensional sliced data derived from 3D computer-aided design data. As such, this approach requires much time and effort for precise fabrication. In this work, a novel single-layer exposure method is proposed in order to improve the fabricating efficiency for 3D concavo–convex-shaped microstructures. In the NSP, 3D microstructures are divided into 13 sub-regions horizontally with consideration of the heights. Those sub-regions are then expressed as 13 characteristic colors, after which a multi-voxel matrix (MVM) is composed with the characteristic colors. Voxels with various heights and diameters are generated to construct 3D structures using a MVM scanning method. Some 3D concavo–convex-shaped microstructures were fabricated to estimate the usefulness of the NSP, and the results show that it readily enables the fabrication of single-layered 3D microstructures. PACS 85.40.Hp; 81.16.Nd; 42.82.Cr     

甲基丙烯酸全氟烷基代乙酯对天然橡胶乳液辐射改性研究

天然橡胶的性能与其组成中的C C双键有密切关系,由于C C双键的存在,为天然橡胶的改性提供了便利,大多数天然橡胶的改性方法,如氯化、氢氯化、环化、环氧化、接枝共聚等皆是建立在这一思路基础上的.White等[1]认为接枝天然橡胶的目的是提高天然橡胶的机械强度,赋予特殊的功能.作     

A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.     

Synthesis and magnetic properties of novel polymeric complexes containing bithiazole rings

A novel linear polymer (PFABT) containing bithiazole rings was synthesized by polycondensation of 2,2′‐diamino‐4,4′‐bithiazole (DABT) and formaldehyde. The complexes of PFABT with two transition metal ions (Fe²⁺, Cu²⁺) were prepared for the first time. The polymer was determined through FT‐IR, ¹H‐NMR and elemental analysis (EA), and the complexes were characterized by FT‐IR. The magnetic behaviors of these complexes were measured as a function of magnetic field strength (0–50 kOe) at 4 K and as a function of temperature (4–300 K) under an applied magnetic field of 30 kOe. The results show that PFABT‐Cu²⁺ is a ferromagnet while PFABT‐Fe²⁺ is an anti‐ferromagnet. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of polypiperazine-amide thin-film membrane on PPESK hollow fiber UF membrane

A new interfacial polymerization (IP) procedure is developed in order to synthesize polypiperazine-amide thin-film membrane on the inner surface of poly(phthalazinone ether sulfone ketone) (PPESK) hollow fiber ultrafiltration (UF) membrane.A hollow fiber composite membrane with good performance was prepared and studied by FT-IR and scanning electron microscopy.     

Strong influences of cocatalyst on ethylene/propylene copolymerization with a MgCl2/SiO2/TiCl4/diester type Ziegler-Natta catalyst

Using triethylaluminum (TEA), triisobutylaluminum (TIBA) or TEA/TIBA mixtures of molar ratio 75/25, 50/50 and 25/75 as the cocatalyst, five different ethylene-propylene copolymer samples were synthesized by a MgCl₂/SiO₂/TiCl₄/diester type Ziegler-Natta catalyst in a slurry polymerization process. The synthesized copolymers are strongly heterogeneous in chain structure and were fractionated into part of nearly random copolymer and part of segmented copolymer. Both polymerization activity and copolymer structure were found to be markedly changed when the cocatalyst was changed from TEA to TEA/TIBA mixtures or pure TIBA. As the content of TEA in cocatalyst increases, yield of the random part of product increases and the yield of the crystalline segmented copolymer part decreases. There is also a decrease in ethylene content of the whole product with increasing TEA amount. Copolymerization behaviors of the TEA/TIBA mixture activated catalysis systems are not simple superposition of those activated by pure TEA and TIBA. When a 50/50 TEA/TIBA mixture was used as cocatalyst, the copolymerization activity became the highest, and yields of both the random copolymer part and the segmented copolymer part are close to the highest level. On the other hand, both parts of the copolymer produced with a 50/50 TEA/TIBA mixture are relatively more blocky than the products of TEA or TIBA systems, and difference in ethylene content between the random part and the segmented part was the smallest. The segmented copolymer part of three typical samples was further fractionated by temperature-gradient extraction fractionation into fractions of different ethylene content and sequence distribution. Changing TEA content in the cocatalyst exerted strong influences also on the fraction distribution of the segmented part of copolymer.     

THE POLYMERIZATION OF EPICHLOROHYDRIN WITH Nd(i-oPr)_3-Al(i-Bu)_3 SYSTEM

Epichlorohydrin (ECH) was polymerized with a rare earth catalytic system: Nd (i-OPr)_3-Al (i-Bu)_3. The effects of Al/Nd molar ratio, solvents, the polymerization time and temperature,the aging time and temperature of the catalyst preparation were studied. The results showed thatat a low Al/Nd molar ratio (4) of the Nd(i-OPr)_3-Al(i-Bu)_3 system ECH polymerized at a lowtemperature (248K) with a high conversion. The average molecular weight ofpolyepichlorohydrin (PECH) ranged from 1×10~5 to 3×10~5.     

ATOMIC FORCE MICROSCOPY STUDIES OF POLYCAPROLACTONE RINGED SPHERULITES*

The surface morphology of free-surface PCL ringed spherulites was investigated by using atomic forcemicroscopy. The spherulites were obtained by crystallization of PCL/PVC blends of different compositions. It was found thatthe ringed spherulite exhibited regularly fluctuating rings on its surface. Compared with the bright-dark ring pattern of thespherulite under a polarizing microscope, it was proved that the optical characteristics of the ringed spherulite underpolarizing microscope coincided with its surface characteristics. The bright rings in polarizing micrographs of the spherulite coincided with the convex rings on its surface, while the dark rings coincided with the concave rings.