控制点优化磨光算法在长江径流量预测中的应用

盈亏修正磨光法所得到的逼近效果仍然很差,通过控制点的参数优化和目标函数的最小,提出一种控制点优化磨光算法,利用这个算法得到参数后代入模型,使预测的精度得到提高.通过实例,该算法简单易行,并通过相对误差进行了分析,控制点优化磨光算法所得到的预测值好于神经网络模型、PPAR和小波网络模型的预测值,这为研究磨光法提供了较好的分析方法.     

Optimal investment with transaction costs based on exponential utility function: a parabolic double obstacle problem

This paper concerns optimal investment problem with proportional transaction costs and finite time horizon based on exponential utility function. Using a partial differential equation approach, we reveal that the problem is equivalent to a parabolic double obstacle problem involving two free boundaries that correspond to the optimal buying and selling policies. Numerical examples are obtained by the binomial method.     

Nonlinear Maps Preserving the Jordan Triple *-Product on Factor von Neumann Algebras

Let A and B be two factor von Neumann algebras. For A, B ∈ A, define by [A, B]_*= AB-BA~*the skew Lie product of A and B. In this article, it is proved that a bijective map Φ : A → B satisfies Φ([[A, B]_*, C]_*) = [[Φ(A), Φ(B)]_*, Φ(C)]_*for all A, B, C ∈ A if and only if Φ is a linear *-isomorphism, or a conjugate linear *-isomorphism, or the negative of a linear *-isomorphism, or the negative of a conjugate linear *-isomorphism.     

超声波-溶胶-凝胶自蔓延法制备纳米氧化铝粉体

超声空化作用已经被证明是制备纳米粉体有效技术,可以防止团聚体生成。本文以柠檬酸为络合剂,在超声波中制得溶胶,用凝胶自蔓延法合成出了纳米Al2O3粉体。通过X射线衍射仪(XRD)、扫描电镜(SEM)和透射电镜(TEM)分析,探讨了不同比例金属离子与柠檬酸对纳米粉体的形成和粉末晶粒尺寸大小的影响。研究结果表明,超声空化可以减少团聚,金属离子与柠檬酸比例为0.6∶1干凝胶在600℃燃烧,保温60 min,可以得到团聚少、颗粒尺寸为20～30 nm的纳米Al2O3粉体。     

LaFeO3单晶生长及其性能研究

以La2O3和Fe2O3粉体为原料,在1400℃,烧结24 h制备出了LaFeO3多晶料棒,采用浮区法生长出LaFeO3单晶。晶体沿(100)晶向生长,晶体的(100)晶面单晶摇摆曲线的半高宽为26″,证实其单晶化程度很高;在298～773 K温度范围内测试了晶体热学性能,晶体比热变化范围为0.58～0.76 J/g.K,热扩散系数变化范围为3.47～0.85 mm2/s,热导率变化范围为13.10～4.21 W/(m.K);研究退火工艺对晶体近红外透过率的影响,在700℃,48h退火可以明显提高透过率达到65%。     

Facile synthesis of mesoporous WO3@graphene aerogel nanocomposites for low-temperature acetone sensing

Nanocomposites constructed by combining mesoporous metal oxides and graphene have received tremendous attention in wide fields of catalysis,energy storage and conversion,gas sensing and so on.Herein,we present a facile interface-induced co-assembly process to synthesize the mesoporous W03@graphene aerogel nanocomposites(denoted as mW03@GA),in which graphene aerogel(GA) was used as a macroporous substrate,mesoporous W03 was uniformly coated on both sides of graphene sheets through a solvent evaporation-induced self-assembly(EISA) strategy using diblock copolymer poly(ethylene oxide)-b-polystyrene(PEO-b-PS) as a template.The resultant mW03@GA nanocomposites possess well-interconnected macroporous graphene networks covered by mesoporous W03 layer with a uniform pore size of 19 nm,high surface area of 167 m~2/g and large pore volume of 0.26 cm~3/g.The gas sensing performance of mW03@GA nanocomposites toward acetone and other gases was studied,showing a high selectivity and great response to acetone at low temperature of 150℃,which could be developed as a promising candidate as novel sensors for VOCs detection.     

Engineering Carbon Distribution in Silicon-Based Anodes at Multiple Scales

The successful commercialization of promising silicon-based anode materials has been hampered by their poor cycling stability caused by the huge volume change. Integration of the carbon matrix with silicon-based (C/Si-based) anode materials has been demonstrated to be a powerful solution to achieve satisfactory electrochemical performance. This minireview aims to outline recent developments on C/Si-based composites, with the emphasis on the importance of carbon distribution at multiple scales. In addition, the forms of the carbon framework (carbon sources and doping of heteroatoms) have been summarized. Particularly, a novel C/Si-based hybrid with carbon distributed at the atomic scale has been highlighted.     

Photo-induced metal-free ATRP of MMA with 2,7-bi-(N-penothiazinyl)fluorenone as photocatalyst

In this study, 2,7-bi-(N-penothiazinyl)fluorenone was employed as photocatalyst (PC), ethyl α-bromophenylacetate (EBP) as atom transfer radical polymerization (ATRP) initiator, and photo-induced metal-free ATRP of methyl methacrylate (MMA) was performed at 25°C under blue light irradiation. PMMAs with well-defined architectures and precisely controlled chain lengths were synthsized. The kinetics results confirmed that molecular weights increased linearly with monomer consumption. The molecular weight distributions (M_w/M_n) of the resultant PMMA were narrow. The polymerization was activated and deactivated by periodic light control process. ¹H nuclear magnetic resonance spectrometer (NMR) and gel permeation chromatography (GPC) were used to characterize the obtained PMMAs. The living characters of the polymerization system were further confirmed by chain extension of from the PMMA-Br macroinitiator.     

水热法合成纳米氧化铪及碳/氧化铪核壳结构纳米复合粉体的研究

Nano-sized HfO₂, C and C/HfO₂ powders obtained through hydrothermal process have been investigated by XRD, TEM and FTIR, and Different precursors, namely Hafnium(Ⅱ) oleate and Hafnium(Ⅱ) hydroxide derived from homogeneous precipitation method, have been chosen for the synthesis of nanometric HfO₂ via hydrothermal process. The results indicate that using the former material as the precursor under identically hydrothermal process can yield finer HfO₂ nanoparticles, compared to using the latter. Nano-sized Carbon of about 100 nm with square morphology and narrow size distribution can be obtained through hydrothermal reaction of sucrose solution at 200 ℃ for 6 h. The addition of as-synthesised Carbon nanoparticles into the hydrothermal process of HfO₂ powder can produce C/HfO₂ composite powders with core-shell structure.     

Mineral formation on dentin induced by nano-bioactive glass

The object of this study was to evaluate the effect of bioactive glass (BG) size on mineral formation on dentin surfaces. Totally demineralized dentin discs were treated using BG suspensions with different particle sizes:i.e., microscale bioactive glass (m-BG), submicroscale bioactive glass (sm-BG) and nanoscale bioactive glass (n-BG). Field-emission scanning electron microscopy and 3D profile measurement laser microscopy were used to observe the surface morphology and roughness. It was found that all BG particles could promoted mineral formation on dentin surfaces, while plug-like depositions were observed on the dentin discs treated by n-BG and they were more acid-resistant. The present results may imply that n-BG has potential clinical application for dentin hypersensitivity treatment.