Fuzzy Model of Regional Economic Competitiveness in GIS Spatial Analysis: Case Study of Gansu, Western China

After more than 20 years of impressive development since the economic reforms in 1978, today western China is facing an increasing development gap between its regions, particularly between urban and rural areas. Using the fuzzy comprehensive evaluation model, this paper aims to demonstrate the evolution of the economic competitiveness levels base on two categories of geographical unity in the province of Gansu located in Northwest China between 2000 and 2004. The results of fuzzy modeling are integrated into GIS spatiotemporal analyses in order to identify the spatial variation of each significant change in terms of the regional economic development. Our research effectively illustrates that there is a particular spatial dynamic of the economic development from region to region. Although the cities have improved very well in their economic competitiveness, the rural areas and minority regions still have a lot of progress to be achieved.     

壳聚糖及其衍生物在分析化学中的应用

介绍了壳聚糖及其衍生物在分离富集、色谱固定相、电化学分析和生物传感器等方面的应用研究进展，并展望了其在分析化学中的应用前景。     

Synthesis and electrochemical properties of 2,6-bis（6-aryl-[1,2,4]- triazolo[3,4-b][1,3,4]-thiadiazole-3-yl）pyridines

By the condensation of 2,6-bis（4-amino-5-mercapto-[1,2,4]-triazoles-2）pyridine with aromatic acid in the presence of phosphorus oxychloride. Compounds of 2,6-bis（6-aryl-[1,2,4]-triazolo[3,4-b][1,3,4]-thiadiazole-3-yl）pyridines were synthesized. Their structures were confirmed by IR, ^1H NMR spectroscopies and elemental analysis. Their electrochemical behavior and cyclic voltammogram also were be studied. The results showed that they have high ionization potentials and good affinity.     

MnO_2/NiCo_2O_4的静电自组装合成及其电化学性能

通过带负电荷的MnO2纳米片与带正电荷的Co-Ni层状双氢氧化物(LDHs)纳米片的静电自组装外加后续热处理合成了异质层状结构的MnO2/NiCo2O4复合物.采用X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱、拉曼光谱、原子吸收光谱(AAS)、场发射扫描电镜(FESEM)和透射电子显微镜(TEM)对其结构和形貌进行了表征.用循环伏安(CV)、恒流充放电和电化学交流阻抗技术对其电化学性能进行了测试.研究结果表明,该方法制得的异质复合物具有多孔层状堆垛结构,这种特殊的结构不仅增大了电解液离子的接触面积,而且还为其嵌入-脱出提供了有效途径.该复合物在1 A·g-1电流密度时,-0.6-0.45 V电位窗口内的比电容达482 F·g-1,优于纯组分MnO2和NiCo2O4的电容性能.     

光固化3D打印与传统涂膜法制备聚酰亚胺的摩擦学性能比较研究

为研究光固化3D打印成形技术及其材料配方对光敏聚酰亚胺摩擦学性能的影响,分别采用光固化3D打印技术和传统涂膜成形对比评价了几种光敏型和热固型聚酰亚胺的摩擦学性能、热稳定性及机械性能等. 研究表明:为适应光固化3D打印成形需要而加入的活性稀释剂和交联剂对光敏聚酰亚胺的机械性能具有提升作用,但削弱了减摩抗磨和耐热性能;相较于涂膜成形的热固性聚酰亚胺,3D打印样品的耐热性能降低,摩擦系数升高了0.08,磨损率增加了9×10?6 mm3/(N·m). 尽管光固化3D打印聚酰亚胺的减摩抗磨性能低于热固成形聚酰亚胺,但基于光固化3D打印技术的一体成型、高精度和自由制造等诸多优势,对实现高性能及复杂结构精密润滑器件的一体化智能制造具有重要的工程意义.      

Silver-catalyzed decarboxylative cross-coupling of α-keto acids with alkenes giving approach to chalcones

A silver-catalyzed decarboxylative cross-coupling of α-keto acids with alkenes is reported. The method, with a wide range of substrate tolerance and mild operational conditions, can produce various chalcone derivatives in moderate to high yields from easily available starting materials.     

Desulfinylative Pd-catalyzed coupling reaction of arenediazonium salt with aryl sulfinates to give unsymmetrical biaryls

An efficient route for the synthesis of unsymmetrical biaryls was developed via palladium catalyzed reaction of arenediazonium salts and aryl sulfinates under inert atmosphere. This synthesis involves cascade processes. Tetrabutylammonium iodide was used as an iodide source for in situ formation of aryl iodide, followed by desulfinylative cross-coupling reaction between aryl sulfinates and aryl iodides. A wide range of biaryls were selectively prepared in one pot from simple substrates in good to excellent yields.     

关于多重联图的均匀全染色

对一个正常的全染色满足各种颜色所染元素数(点或边)相差不超过1时,称为均匀全染色,其所用最少染色数称为均匀全色数．本文证明了关于多重联图的若干情况下的均匀全色数定理,得到了若干特殊多重联图的均匀全色数．     

两类积图的邻点可区别全染色

本文.证明了,当n≥2时,Xat(K_n×K′_n)=2n;当p,q≥2时,Xat(C_(2p)×K_(2q))=2q 3,其中K_n×K′_n是两个不同标号完全图的积图,C_(2p)×K_(2q)是偶圈和偶阶完全图的积图.