White-light-emitting diodes using GaN-excited CdSe/CdS/ZnS quantum dots

Fluorescence-based white-light-emitting diodes (WLEDs) were fabricated using blue GaN chips and green- and red-emitting CdSe/CdS/ZnS quantum dots (QDs). The coordinate and color temperature of the WLEDs could be varied because of the size-tunable emission of CdSe QDs from 510 to 620 nm. Warm and cold white emissions were confirmed with the color temperature ranging from 4000 to 9000 K. Color coordinates were analyzed at different bias. The fast enhancement of blue emission resulted in the shift of color coordinates to the cold side. The stability of white emission during operation was analyzed; stable spectra were achieved within 90 min.     

Tungsten doped mesoporous SBA‐16 as novel heterogeneous catalysts for oxidation of cyclopentene to glutaric acid

Novel heterogeneous tungsten species in mesoporous silica SBA‐16 catalysts based on ship‐in‐a‐bottle methodology are originally reported for oxidizing cyclopentene (CPE) to glutaric acid (GAC) using hydrogen peroxide (H₂O₂). For all W‐SBA‐16 catalysts, isolated tungsten species and octahedrally coordinated tungsten oxide species are observed while WO₃ crystallites are detected for the W‐SBA‐16 catalysts with Si/ W = 5, 10, and 20. The specific surface areas and the corresponding total pore volumes decrease significantly as increasing amounts of tungsten incorporated into the pores of SBA‐16. Using tungsten‐substituted mesoporous SBA‐16 heterogeneous catalysts, high yield of GAC (55%) is achieved with low tungsten loading (for Si/W = 30, ~13 wt%) for oxidation of CPE. The W‐SBA‐16 catalysts with Si/W = 30 can be reused five times without dramatic deactivation. In fact, low catalytic activity provided by bulk WO₃ implies that the highly distributed tungsten species in SBA‐16 and the steric confinement effect of SBA‐16 are key elements for the outstanding catalytic performance.     

Broadband and high efficiency metal multi-layer dielectric grating based on non-quarter-wave coatings as a reflective mirror

This article deals with designing a broadband and high efficiency metal multi-layer dielectric grating (MMDG) used to compress and stretch an ultrashort laser pulse. The diffraction characteristics of the MMDG are analysed by using the rigorous coupled-wave method. The multi-layer dielectric used as the reflective mirror is made up of non- quarter-wave coatings. Taking the diffraction efficiency of the 1 order as the value of merit function, the parameters such as groove depth, residual thickness, duty cycle, and reflective mirror are optimized to obtain broadband and high diffraction efficiency. The optimized MMDG shows an ultra-broadband working spectrum with the average efficiency exceeding 97% over 160 nm wavelength centred at 1053 nm and TE polarization. The optimized MMDG should be useful for chirped pulse amplification.     

Photocatalytic and optical properties of titanium dioxide thin films prepared by metalorganic chemical vapor deposition

Titanium dioxide thin films have been deposited by metalorganic chemical vapor deposition (MOCVD) over sodalime glass substrates at substrate temperatures ranging from 250 °C to 450 °C. The effect of deposition temperature on the structure and microstructure of the obtained films has been studied by x-rays diffraction (XRD) and scanning electron microscopy (SEM), respectively. Diffraction patterns show the existence of a pure anatase phase beside a texture change with the increase of deposition temperature. Micrographs show grain fragmentation with the increase in deposition temperature. UV–Vis. spectra have been recorded by spectrophotometery. The optical energy gap has been calculated for the deposited films from the spectrophotometrical data. Photocatalytic experiments have been carried out. The photocatalytic activity has been found to decrease with the increase in deposition temperature.     

A strategy for multivariate calibration based on modified single-index signal regression: Capturing explicit non-linearity and improving prediction accuracy

In this paper, a modified single-index signal regression (mSISR) method is proposed to construct a nonlinear and practical model with high-accuracy. The mSISR method defines the optimal penalty tuning parameter in P-spline signal regression (PSR) as initial tuning parameter and chooses the number of cycles based on minimizing root mean squared error of cross-validation (RMSECV). mSISR is superior to single-index signal regression (SISR) in terms of accuracy, computation time and convergency. And it can provide the character of the non-linearity between spectra and responses in a more precise manner than SISR. Two spectra data sets from basic research experiments, including plant chlorophyll nondestructive measurement and human blood glucose noninvasive measurement, are employed to illustrate the advantages of mSISR. The results indicate that the mSISR method (i) obtains the smooth and helpful regression coefficient vector, (ii) explicitly exhibits the type and amount of the non-linearity, (iii) can take advantage of nonlinear features of the signals to improve prediction performance and (iv) has distinct adaptability for the complex spectra model by comparing with other calibration methods. It is validated that mSISR is a promising nonlinear modeling strategy for multivariate calibration.     

Amidinium salts: Towards enabling electrochemistry in non-polar media from alkanes to ionic liquids

There is little known about electrochemical behavior in non-polar media due to lack of compatible, hydrophobic salts. In this work, this difficult challenge has been overcome by following a strategy based on designing and synthesizing a novel family of organic salts with highly-delocalized cations and anions. The salts are based on the amidinium cation with highly-delocalized positive charge and long alkyl groups that enable good miscibility in heptane, an archetypical, non-polar media, while being hydrophobic, room-temperature ionic liquids. The electrolyte solutions show ionic conductivities that span the range 10^− 11–10^− 4 S cm^− 1 and electrochemical activity which enable their application as antistatic agents and also as new type of hydrophobic electrolytes in various electrochemical devices.     

D-admissible hybrid control of a class of singular systems

This paper mainly studies the problem of designing a hybrid state feedback D-admissible controller for a class of linear and nonlinear singular systems. Based on the relationship between singular discrete systems and singular delta operator systems, several necessary and sufficient conditions for a linear singular delta operator system to be D-admissible (i.e. regular, causal and all finite poles lie in a prescribed circular region) with different representations are derived. Then, the existence conditions and explicit expressions of a desirable D-admissible controller are given by means of matrix inequalities and strict linear matrix inequalities, respectively. We further extend the obtained results to singular delta operator systems with Lipschitz nonlinear perturbations, and the design methods of hybrid controller are presented for the nonlinear case as well. Finally, numerical examples as well as simulations are provided to illustrate the effectiveness of the theoretical outcomes obtained in the paper.     

Synthesis and Characterization of Amphiphilic Copolymer Acrylic Acid-co-p-Chloromethylstyrene

The free radical copolymerization of acrylic acid (M₁) with p-chloromethylstyrene (M₂) in dioxane and in the presence of α,α′-azobisisobutyronitrile (AIBN) at 65°C is reported. Copolymer compositions of six copolymer samples obtained from feed ratios of M₁:M₂ = 95.2:4.8 to 21.4:78.6 were determined by ¹H-NMR. The reactivity ratios of AA/p-CMS copolymerization system calculated by the F-R method were r ₁ = 0.50 ± 0.06 and r ₂ = 1.52 ± 0.15, almost the same as r ₁ = 0.43 ± 0.21 and r ₂ = 1.31 ± 0.14 by the extended K-T method. On the basis of the reactivity ratios of two monomers, the sequence length distribution in the AA/p-CMS copolymers was obtained. For f₂ = 4.77%, the monomer unit of p-CMS is individually separated in the chain of AA; for f₂ = 35.53%, the alternating tendency prevails and a large number of mono-sequences are formed. The number-average ( _n) and weight-average ( _w) molecular weights were determined by gel permeation chromatography. The effect on molecular weights of feed composition is also discussed. In the presence of constant initiator concentration, the gradual increase in the ratio of M₂:M₁ (from14.7:85.3 to 78.6:21.4) was accompanied by a decrease in molecular weights ( _n from 11907 to 3961).     

Thermogravimetry study of the pyrolytic characteristics and kinetics of macro-algae Macrocystis pyrifera residue

Macrocystis pyrifera is one important marine macro-algae, while its residues produced by industrial alginate extraction is a hot potato. To figure out whether its residue is suitable for pyrolysis for biofuel, the pyrolytic characteristics and kinetics of macro-algae M. pyrifera residue was investigated using thermogravimetric method from 50 to 800 °C in an inert argon atmosphere at different heating rates of 5, 10, 20, and 30 °C min^?1. The activation energy and pre-exponential factor was calculated by Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, and Popescu methods, and the kinetic mechanism was deduced by Popescu method. The results showed that the primary devolatilization stage of M. pyrifera residue can be described by Jander function $ \left(\left[ {1 - \left( {1 - \alpha } \right)^{1/3} } \right]^{2}\right) $ . The average activation energy of M. pyrifera residue was 222.4 kJ mol^?1. The results suggested that the experimental results and kinetic parameters provided useful information for the design of pyrolytic processing system using M. pyrifera residue as feedstock.     

Electrodeposited nanogold decorated graphene modified carbon ionic liquid electrode for the electrochemical myoglobin biosensor

In this paper, a carbon ionic liquid electrode (CILE) was fabricated using ionic liquid 1-hexylpyridinium hexafluorophosphate as modifier, which was further in situ electrodeposited with graphene (GR) and gold nanoparticles step by step to get an Au/GR nanocomposite modified CILE. Myoglobin (Mb) was further immobilized on the Au/GR/CILE surface with Nafion film to get the modified electrode denoted as Nafion/Mb/Au/GR/CILE. Cyclic voltammetric experiments indicated that a pair of well-defined quasi-reversible redox peaks appeared in pH 3.0 phosphate buffer solution with the formal potential (E ^0′) located at ?0.197 V (vs. saturated calomel electrode), which was the typical characteristics of Mb heme Fe(III)/Fe(II) redox couples. Thus, the direct electron transfer rate between Mb and the modified electrode was promoted due to the high conductivity and increased surface area of Au/GR nanocomposite present on electrode surface. Based on the cyclic voltammetric data, the electrochemical parameters of Mb on the modified electrode were calculated. The Mb-modified electrode showed excellent electrocatalytic activities towards the reduction of trichloroacetic acid and H₂O₂ with wider linear range and lower detection limit. Using GR and Au nanoparticles modified CILE, a new third-generation electrochemical Mb biosensor was constructed with good stability and reproducibility.