Modification of carbon electrode in ionic liquid through the reduction of phenyl diazonium salt. Electrochemical evidence in ionic liquid

Electrochemical reduction of the 4-nitrophenyl diazonium salt in ionic liquid media has been investigated at carbon electrode. The ionic liquid chosen for this study was 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI]. The cyclic voltammetry study demonstrated the possibility of the electrochemical grafting of the nitrophenyl groups onto carbon electrode after the reduction of its corresponding diazonium in ionic liquid. The electrochemical characterization of the modified electrode achieved on ionic liquid displays the presence of the nitrophenyl group at the carbon surface. Moreover, the surface concentration of the attached group obtained in this media was found to be around 1.7 × 10⁻¹⁰ mol cm⁻², this value may suggest the possibility of the formation of monolayer. Furthermore, the characterization of the modified electrode in [EMIM][TFSI] showed the conversion of some NO₂-phenyl groups to NHOH-phenyl. This observation could indicate the presence of surface interaction between the reduced NO₂-phenyl and the ionic liquid cation, thanks to the presence of acidic proton in the ionic liquid cation.     

Low-viscosity and low-melting point asymmetric trialkylsulfonium based ionic liquids as potential electrolytes

Nine new ionic liquids based on small asymmetric trialkylsulfonium cations with TFSI⁻ anion were prepared and characterized. Physical and electrochemical properties of these ionic liquids, including melting point, thermal stability, viscosity, conductivity and electrochemical window were determined. Reducing symmetry of cations reduces the melting points of these ILs. Some of these hydrophobic ionic liquids showed low-viscosity and low-melting point characteristics. The viscosities of S₂₂₃TFSI, S₂₂₁TFSI and S₁₂₃TFSI were 33, 36 and 39 mPa s at 25 °C, respectively. Electrochemical and thermal stabilities of these ILs permitted them to become promising electrolytes used in electrochemical devices.     

Carboxylic and sulfonic N-substituted naphthalene diimide salts as highly stable non-polymeric organic electrodes for lithium batteries

Two N-substituted naphthalene tetracarboxylic diimide (NTCDI) ionic compounds, carboxylic and sulfonic sodium salts, were prepared and used as positive electrode active materials in lithium-half cells. The aim of this investigation was to assess the solubility-suppressing effect of two different negatively charged substituent groups on a redox-active organic backbone using a carbonate-based liquid electrolyte. NTCDI derivatives were obtained in high yields from reaction of naphthalene tetracarboxylic dianhydride with neutralized glycine or with neutralized taurine. They were mixed with carbon black and cycled in galvanostatic mode against lithium metal using 1 M LiPF₆ EC/DMC liquid electrolyte. These two NTCDI derivatives exhibit a quite stable electrochemical activity upon cycling at an average potential of 2.3 V vs. Li⁺/Li⁰ giving rise to specific capacity values of 147 mAh·g^− 1 and 113 mAh·g^− 1 for the dicarboxylate and the disulfonate derivative, respectively. This study clearly supports the useful effect of such grafted permanent charges as a general rule on the electrochemical stability of crystallized organic materials based on the assembly of small redox-active units.     

Highly mesoporous and high surface area carbon: A high capacitance electrode material for EDLCs with various electrolytes

Activated carbon fibers (ACFs) with high surface area and highly mesoporous structure for electrochemical double layer capacitors (EDLCs) have been prepared from polyacrylonitrile fibers by NaOH activation. Their unique microstructural features enable the ACFs to present outstanding high specific capacitance in aqueous, non-aqueous and novel ionic liquid electrolytes, i.e. 371 F g⁻¹ in 6 mol L⁻¹ KOH, 213 F g⁻¹ in 1 mol L⁻¹ LiClO₄/PC and 188 F g⁻¹ in ionic liquid composed of lithium bis(trifluoromethane sulfonyl)imide (LiN(SO₂CF₃)₂, LiTFSI) and 2-oxazolidinone (C₃H₅NO₂, OZO), suggesting that the ACF is a promising electrode material for high performance EDLCs.     

Electrochemical properties of liquid electrolyte added quasi-solid state TiO2 dye-sensitized solar cells

In this study a process has been introduced to replace traditional liquid or solid electrolyte coatings on dye-sensitized photoelectrode in solar cells. This process has more efficient diffusion of electrolyte, hence higher sensitivity. Better interfacial contact between polymer electrolyte and TiO₂ photoelectrode had improved electrochemical response and ionic conductivity of cell. Conductivity of this electrode was 9.33 × 10⁻³ S cm⁻¹ (at room temperature), which is much higher than the using traditional process for addition of electrolytes. It has 0.68 V open-circuit voltage and 3.19 mA cm⁻² short-circuit current density. Energy conversion efficiency of this cell was about 37% higher than the cell developed with traditional processes under constant light intensity (45 mW cm⁻²).     

Plastic–polymer composite electrolytes: Novel soft matter electrolytes for rechargeable lithium batteries

We present here a soft matter solid composite electrolyte obtained by inclusion of a polymer in a semi-solid organic plastic lithium salt electrolyte. Compared to lithium bis-trifluoromethanesulfonimide-succinonitrile (LiTFSI-SN), the (100 − x)%-[LiTFSI-SN]: x%-P (P: polyacrylonitrile (PAN), polyethylene oxide (PEO), polyethylene glycol dimethyl ether (PEG)) composites possess higher ambient temperature ionic conductivity, higher mechanical strength and wider electrochemical window. At 25 °C, ionic conductivity of 95%-[0.4 M LiTFSI-SN]: 5%-PAN was 1.3 × 10⁻³ Ω⁻¹ cm⁻¹ which was twice that of LiTFSI-SN. The Young’s modulus (Y) increased from Y → 0 for LiTFSI-SN to a maximum ∼1.0 MPa for (100 − x)%-[0.4 M LiTFSI-SN]: x%-PAN samples. The electrochemical voltage window for composites was approximately 5 V (Li/Li⁺). Excellent galvanostatic charge/discharge cycling performance was obtained with composite electrolytes in Li|LiFePO₄ cells without any separator.     

A lotus root-like porous nanocomposite polymer electrolyte

A lotus root-like porous nanocomposite polymer electrolyte (NCPE) based on poly(vinylidene difluoride-co-hexafluoropropylene) [P(VDF-HFP)] copolymer and TiO₂ nanoparticles was easily prepared by a non-solvent induced phase separation (NIPS) process. The formation mechanism of the lotus root-like porous structure is explained by a qualitative ternary phase diagram. The resulting NCPE had a high ionic conductivity up to 1.21 × 10⁻³ S cm⁻¹ at room temperature, and exhibited a high electrochemical stability potential of 5.52 V (vs. Li/Li⁺), lithium ion transference number of 0.65 and 22.89 kJ mol⁻¹ for the apparent activation energy for transportation of ions. It is of great potential application in polymer lithium ion batteries.     

Promotion of PtIr and Pt catalytic activity towards ammonia electrooxidation through the modification of Zn

Zn is introduced into Pt and PtIr electrodes by applying potential cycles to their corresponding polycrystalline microdisc electrodes in a ZnCl₂-containing ionic liquid bath. Scanning-electron microscopy and energy-dispersive X-ray microanalysis studies show that nanostructured PtIrZn and PtZn layers created on the microdisc electrodes contain approximately 5 wt% Zn. Cyclic voltammetric studies reveal that PtZn and PtIrZn are significantly more active towards electrochemical ammonia oxidation in alkaline media than virgin Pt and PtIr electrodes. The PtIrZn electrode demonstrates a low onset potential of 0.30 V vs RHE and a high exchange current density of 4.3 × 10^− 8 A cm^− 2, which is favorably comparable to state-of-the-art electrocatalyts for the same reaction. The catalytic activity promotion by the Zn modification may be related to the inhibition of the hydrogen electrochemistry. PtIrZn appears therefore to be a very promising anode catalyst for direct ammonia fuel cells and ammonia electrolysis.     

A new class of proton-conducting ionic plastic crystals based on organic cations and dihydrogen phosphate

Choline dihydrogen phosphate ([N_1.1.1.2OH]DHP) and 1-butyl-3-methylimidazolium dihydrogen phosphate ([C₄mim]DHP) were synthesized as a new class of proton-conducting ionic plastic crystals. Both [N_1.1.1.2OH]DHP and [C₄mim]DHP showed solid–solid phase transition(s) and showed a final entropy of fusion lower than 20 J K⁻¹ mol⁻¹ which is consistent with Timmerman’s criterion for molecular plastic crystals. The ionic conductivity of [N_1.1.1.2OH]DHP was in the range of 10⁻⁶ S cm⁻¹–10⁻³ S cm⁻¹ in the plastic crystalline phase. On the other hand, the ionic conductivity of [C₄mim]DHP showed about 10⁻⁵ S cm⁻¹ in the plastic crystalline phase. [N_1.1.1.2OH]DHP showed one order of magnitude higher ionic conductivity than [C₄mim]DHP in the temperature range where the plastic phase is stable.     

Strong anion receptor-assisted boron-based Mg electrolyte with wide electrochemical window and non-nucleophilic characteristic

Herein we present a strong anion receptor-assisted Mg-ion electrolyte, which is synthesized from tris(2H-hexafluoroisopropyl) borate (THFPB) and MgO in 1,2-dimethoxyethane (DME). The as-prepared borate magnesium oxide complex (BMOC) electrolyte delivers exceptional electrochemical performances, including extremely high anodic stability (up to 4.2 V vs. Mg), non-corrosivity to stainless steel and aluminium foils, and reasonable ionic conductivity of 1.74 × 10^− 4 S cm^− 1. In addition, by virtue of the non-nucleophilic characteristic of the BMOC electrolyte, S ||BMOC ||Mg cells have been assembled, which show a high stable discharge capacity of 1030 mAh g^− 1 for 15 cycles and one well-defined voltage plateau of ≈ 1.1 V vs. Mg, yielding a desirable energy density beyond 1100 Wh kg^− 1 based on the weight of sulfur in cathodes.     

Noncovalently functionalized water-soluble multiwall-nanotubes through azocarmine B and their application in nitric oxide sensor

A new noncovalent approach for the dissolution of MWNTs in water by azocarmine B (ACB) is reported. Through a simple electro-polymerization procedure, a novel electrochemical NO sensor based on water-soluble MWNTs and polyazocarmine B (PACB) nanofilm electrode was prepared, which showed excellent electrocatalytic activity towards the oxidation of nitric oxide (NO). The oxidation current linearly increased with the nitric oxide concentration in the range of 2.2 × 10⁻⁷–1.2 × 10⁻⁴ mol L⁻¹ with a low detection limit of 2.8 × 10⁻⁸ mol L⁻¹. The sensor has the merit of good stability, reproducibility, high sensitivity and selectivity, and it can be used to monitor NO released from rat liver cells effectively.     

Electrochemical biosensor based on hairpin DNA probe using 2-nitroacridone as electrochemical indicator for detection of DNA species related to Chronic Myelogenous Leukemia

In this article, a new kind of hairpin DNA Electrochemical biosensor using nitroacridone as electrochemical indicator was first designed, and used to detect BCR/ABL fusion gene in Chronic Myelogenous Leukemia (CML). The results indicated that in pH 7.0 Tris–HCl buffer solution, the oxidation peak current was linear with the concentration of complementary strand in the range of 6.2 × 10⁻⁸–3.1 × 10⁻⁷ mol/l with a detection limit of 5.3 × 10⁻⁹ mol/l. This new hairpin DNA electrochemical biosensor demonstrates its excellent specificity for single-base mismatch and complementary (dsDNA) after hybridization, and this probe has been used for assay of PCR product of a real sample with satisfactory result.     

Dehydration of tetrahydrofuran by pervaporation using a composite membrane

Tetrahydrofuran (THF) is a strong aprotic solvent, commonly used in the pharmaceuticals industry due to its broad solvency for both polar and non-polar compounds. THF and water form a homogeneous azeotrope at 5.3 wt.% water thus simple distillation is not feasible to dehydrate THF below this concentration. Pervaporation offers a solution since it is not governed by vapour–liquid equilibria. However many polymer-based pervaporation membranes are cast utilizing THF as the casting solvent and so these membranes have a tendency to swell excessively in its presence. This results in poor separation performance and poor long-term stability and thus renders these membranes unsuitable for THF dehydration.In this study, a new membrane available from CM Celfa, CMC-VP-31 has been tested for the dehydration of THF. The membrane shows excellent performance when dehydrating THF with a flux of over 4 kg m⁻² h⁻¹ when dehydrating THF containing 10 wt.% water at 55 °C dropping to 0.12 kg m⁻² h⁻¹ at a water content of 0.3 wt.%. The permeances of water and THF in the membrane were calculated to be 11.76 × 10⁻⁶ and 7.36 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹, respectively, at 25 °C and found to decrease in the membrane with increasing temperature to values of 6.71 × 10⁻⁶ and 1.63 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ at 55 °C. The flux and separation factor were both found to increase with an increase in temperature thus favouring the operation of CMC-VP-31 at high temperatures to optimize separation performance.     

Flow injection analysis system with electrochemical detection for the simultaneous determination of nanomolar levels of acetaminophen and codeine

A simple, rapid and low-cost electroanalytical method is proposed for the determination of acetaminophen (ACP) and codeine (COD) at nanomolar levels in pharmaceutical and biological samples. The analytical procedure is based on a flow injection analysis system coupled to electrochemical detection, which was multiple pulse amperometry (FIA-MPA). Boron-doped diamond was used as the working electrode for electrochemical detection. The electrode was subjected to a cathodic pretreatment and was selected in this work due its good electrochemical performance. By applying the FIA-MPA method, after a number of optimization assays, the analgesics were simultaneously determined at excellent linear concentration ranges. The analytical curves ranged from 80 nmol L⁻¹ to 100 µmol L⁻¹ for ACP and from 50 nmol L⁻¹ to 10 µmol L⁻¹ for COD, and the obtained limits of detection were 30 nmol L⁻¹ and 35 nmol L⁻¹ for ACP and COD, respectively. The practical applicability of the electroanalytical method was evaluated from the ACP and COD determination in two sample matrices: commercial pharmaceutical samples and biological fluids. In the case of pharmaceutical formulation samples, the obtained results were statistically similar to those obtained using a reference chromatographic method. In addition, these drugs were simultaneously quantified in biological fluid samples of urine and human serum with excellent recovery percentages.     

Electroenzymatic oxidation of polyaromatic hydrocarbons using chemical redox mediators in organic media

The bioelectrochemical oxidation of two polyaromatic hydrocarbons (PAH): anthracene (ANT) and pyrene (PYR), using horseradish peroxidase (HRP) resulting in the synthesis of photoactive polyaromatic quinones in organic media was studied. The electrochemical generation of hydrogen peroxide was compared with its direct addition in concentrations of up to 0.0012 mol L⁻¹. In addition, three different chemical redox mediators were evaluated: ABTS, thionin and ortho-aminophenol. In a reaction medium containing 30% acetone and ABTS as mediator with a molar ratio mediator/PAH of 1:10, HRP attained the highest level of oxidation of PAH (1 × 10⁻³ mol L⁻¹): ANT (94%) and PYR (91%), producing 9,10-anthraquinone and mainly 1,2 and 4,5-pyrenequinones, respectively.     

Activity and stability of horseradish peroxidase in hydrophilic room temperature ionic liquid and its application in non-aqueous biosensing

The activity and stability of horseradish peroxidase (HRP) were investigated in a hydrophilic room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF₄]) by electrochemical methods. Although no detectable activity exhibited in anhydrous [bmim][BF₄], HRP was active in the presence of a small amount of water (4.53%, v/v). And its activity can be improved by immobilization in agarose hydrogel. The immobilized HRP possesses excellent activity at 65 °C. It remained 80.2% of its initial activity after being immersed for 10.5 h in an aqueous mixture of [bmim][BF₄] with some hydrogen peroxide (H₂O₂) under room temperature, implying extremely high stability. Moreover, the immobilized HRP was found to be very sensitive and stable in H₂O-containing [bmim][BF₄] for the detection of H₂O₂, with a wide linear range of 6.10 × 10⁻⁷ to 1.32 × 10⁻⁴ mol l⁻¹ and low detection limit of 1.0 × 10⁻⁷ mol l⁻¹.     

Electrochemical oxidation behavior of nitrite on a chitosan-carboxylated multiwall carbon nanotube modified electrode

A novel chitosan-carboxylated multiwall carbon nanotube modified glassy carbon electrode (MC/GCE) was developed to investigate the oxidation behavior of nitrite using cyclic voltammetry and differential pulse voltammetry modes. The electrochemical mechanism of the MC/GCE towards nitrite was discussed. The MC/GCE exhibited fast response towards nitrite with a detection limit of 1 × 10⁻⁷ mol l⁻¹ and a linear range of 5 × 10⁻⁷–1 × 10⁻⁴ mol l⁻¹. The possible interference from several common ions was tested. The proposed method was successfully applied in the detection of nitrite in real samples.     

A microfluidic flow-through electrochemical reactor for wastewater treatment: A proof-of-concept

In this work, a microfluidic flow-through electrochemical reactor for wastewater treatment is presented which simultaneously minimizes ohmic drop and mass transfer limitations, two of the most important bottlenecks in electrochemical wastewater treatment. A proof-of-concept comparison versus a state-of-the-art flow-by commercial reactor revealed that the proposed reactor greatly outperforms the commercial system. The novel system requires only 2.4 Ah dm^− 3 (vs. 11.4 Ah dm^− 3) and 12.5 kWh m^− 3 (vs. 75.0 kWh m^− 3) to completely mineralize 100 mg dm^− 3 of clopyralid spiked in a low-conductive (1 mS cm^− 1) matrix with both systems using diamond anodes. The microfluidic flow-through configuration represents a promising approach to the development of cost-effective electrochemical technologies for wastewater treatment.     

Upper critical solution temperatures for immiscible solvent systems with halide salts,carboxylic acids,surfactants and polynuclear aromatic compounds and benzene derivatives

Upper critical solution temperatures (UCSTs) of (water + phenol) systems are reported with 0.1 mol · kg⁻¹ halide salts, carboxylic acids, 1.0% PEG 200 in water, and 0.01 mol · kg⁻¹ surfactants and polynuclear aromatic compounds namely benzene, naphthalene, anthracene, chrysene; and benzene derivatives namely toluene and xylene solutions in phenol. Valence electrons and shell numbers, basicity, –CH₃ and –CH₂–, hydrophilic, hydrophobic and π conjugated electrons of respective additives have been noted to affect their UCSTs and mutual solubilities. The surfactants decrease the USCTs with higher mutual solubilities due to effective hydrophilic as well as hydrophobic interactions with aqueous and organic phases, respectively. A stronger structure breaking action of 3(-OH) of glycerol outweighs those of the 3(-COO⁻) and 1(-OH) of citric acid and urea does produce almost equal UCSTs as compared to glycerol. A decrease in UCSTs is noted with increasing number of conjugated π electrons of benzene, naphthalene, anthracene and chrysene. In general, dTc/dx₂ values of salts for 0.20 to 0.16 mole fractions of phenol are found positive while for 0.055 to 0.052 mole fractions, the negative.     

Selective determination of uric acid with DNA doped polymers modified carbon fiber microelectrode

New biocomposite materials, based on the incorporation of DNA doped p-aminobenzensulfonic acid, was fabricated by electrochemical method. A carbon fiber microelectrode modified by this thin film was fabricated for selective determination of uric acid (UA) in the presence of a larger amount of ascorbic acid (AA). It was found that the voltammetric oxidation peak separation between UA and AA is about 260 mV at the modified electrode. A linear response of the peak current versus the concentration was found in the range of 8 × 10⁻⁷–6 × 10⁻⁴ M with correlation coefficient of 0.9991 and the detection limit was 5 × 10⁻⁷ M (s/n = 3) at the 5 × 10⁻⁴ M AA. The presence of high concentration AA did not interference the determination. The electropolymerized film was characterized by SEM techniques. The modified electrode shows good sensitivity, selectivity and stability.