Numerical analysis of enhanced mixing in a Gallay tote blender

The mixing performance of a multi-bladed baffle inserted into a traditional Gallay tote blender is explored by graphic processing unit-based discrete element method software. The mixing patterns and rates are investigated for a binary mixture, represented by two different colors, under several loading profiles. The baffle effectively enhances the convective mixing both in the axial and radial directions, because of the disturbance it causes to the initial flowing layer and solid-body zone, compared with a blender without a baffle. The axial mixing rate is affected by the gap between the baffle and the wall on the left and right sides, and an optimal blade length corresponds to the maximum mixing rate. However, the radial mixing rate increases with the blade length almost monotonically.     

Novel WS2/Fe0.95S1.05 Hierarchical Nanosphere as a Highly Efficient Electrocatalyst for Hydrogen Evolution Reaction

Fe_0.95S_1.05 with high reactivity and stability was incorporated into WS₂ nanosheets via a one-step solvothermal method for the first time. The resulted hybrid catalyst has much higher catalytic activity than WS₂ and Fe_0.95S_1.05 alone, and the optimal WS₂/Fe_0.95S_1.05 hybrid catalyst was found by adjusting the feed ratio. The addition of Fe_0.95S_1.05 was proven to be able to enhance the hydrogen evolution reaction (HER) activity of WS₂, and vice versa. At the same time, it was found that the catalytic effect of the hybrid catalyst was the best when the feed ratio was W : Fe=2 : 1. In other words, we confirmed that there is a synergistic effect between W- and Fe-based sulfide hybrid catalysts, and validated that the reason for the improved HER performance is the strong interaction between the two in the middle sulfur. WS₂/Fe_0.95S_1.05-2 hybrid catalyst leads to enhanced HER activity, which shows a low overpotential of ∼0.172 V at 10 mA cm⁻², low Tafel slope of ∼53.47 mV/decade. This study supplies innovative synthesis of a highly active WS₂/Fe_0.95S_1.05 hybrid catalyst for HER.     

Synthesis of terpinyl acetate using octadecylamine ethoxylate ionic liquids as catalysts

Terpinyl acetate, an important natural flavor, can be synthesized by esterification of α-pinene with acetic acid under acidic conditions. In this work, seven acidic ionic liquids were first synthesized, using octadecylamine ethoxylates (AC 1810, AC 1815, AC 1820, and AC 1830) as the cations, and characterized by FT-IR, ¹H NMR, and ¹³C NMR spectroscopy. The ionic liquids were then used as catalysts in the synthesis of terpinyl acetate. The effect of preparation conditions on catalyst performance was examined. It was found that the acidic ionic liquid 1-(3-sulfonic acid)propyl-3-poly(ethylene glycol) octadecylamine polyoxyethylene ether tetrafluoroborate ([PAC1815]⁺[BF₄]^?) was an excellent catalyst for synthesis of terpinyl acetate. The effects of the conditions used for preparation of terpinyl acetate were examined in detail, and the optimum preparation conditions were obtained. Under the optimum conditions, the yield of terpinyl acetate reached 35.70 %. When the catalyst was reused for the 5th time, the yield of terpinyl acetate was still 32.00 %. The results showed that effective separation and recycling of catalyst could contribute to developing a new strategy for synthesis of terpinyl acetate.     

Bilayer rGO-Based Photothermal Evaporator for Efficient Solar-Driven Water Purification[]**

Interfacial evaporation has emerged as a promising approach to produce freshwater. However, an urgent concern is that, due to the illegal discharge of industrial wastewater, most water bodies are polluted by trace volatile organic compounds (VOCs), which are easily volatilized and enriched in the collected water during the interfacial evaporation process. Herein, a bilayer photothermal evaporator was reasonably designed for contaminated water purification. The bottom hydrophilic rGO-sodium alginate (SA) sheets purposefully disintegrate water transport channels, thus quickly removing VOCs through physical adsorption. The rGO-SA-TiO₂ upper layer sufficiently absorbs incident light and therefore persistently generates reactive oxidizing species to degrade upward VOCs. Notably, the oriented microchannels inside the evaporator allow sustained light reflections to improve the utilization of solar energy. The evaporation rate can reach 1.63 kg m⁻² h⁻¹ with a considerably high VOC removal efficiency of up to 96 %. Such an integrated bilayer evaporator provides an effective strategy to obtain clean water via solar distillation.     

Improved efficiency of organic solar cells with modified hole‐extraction layers

The aim of this work has been to study the influence of modified hole‐extraction layers on the performance of organic solar cells (OSCs) based on blends of poly (3‐hexylthiophene) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. The hole‐extraction layers consist of poly (3,4‐ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) doped with different concentrations of bromine. Compared with pristine OSC without adding bromine to the hole‐extraction layer, the bromine‐doped OSCs show a 49% increase in the power conversion efficiency (from 2.12 to 3.16%), which could be attributed to the increase of electrical and optical properties of PEDOT:PSS films after the addition of bromine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 125–128, 2012     

Estimation of the solubility product of hydrocalumite–hydroxide,a layered double hydroxide with the formula of [Ca2Al(OH)6]OH·nH2O

From aqueous NaOH/Ca(OH)₂/NaAl(OH)₄ mixtures, after allowing short reaction times we observed the precipitation of Ca(OH)₂(s) at lower, and a mixture of Ca(OH)₂(s) and a layered double hydroxide, hydrocalumite (HC) at higher aluminate concentrations. From the maximum aluminate concentration, at which the equilibrium solid phase is still portlandite (i.e., further increase in the aluminate concentration results in HC appearing in the precipitate beside the portlandite), the concentration based solubility products of two polymorphs of HC with the formula of [Ca₂Al(OH)₆]OH·nH₂O (differing in n) has been estimated and was found to be log L_HC=−11.4 at 25 °C and −12.1 at 75 °C, respectively (where L_HC=[Ca²⁺]²[Al(OH)₄⁻][OH⁻]³) and at constant ionic strength (I=1 M NaCl). To the best of our knowledge, this is the first published estimate for the solubility product of hydrocalumite. Additionally, from the composition obtained for NaOH/Ca(OH)₂/NaAl(OH)₄ mother liquors in equilibrium with Ca(OH)₂(s), attempts were made to extract the formation constant of the ion pair CaAl(OH)₄⁺. It was found, that the effects caused by the supposed formation of this solution species are too small to be reliably determined, which allowed an upper estimate for its formation constant, K, to be suggested in the temperature range of 25–75 °C (K<200 and 40 M⁻¹ at 25 and 75 °C, respectively).     

Solid State Synthesis of Spinel-Type Metal Oxide Mg1.5Fe0.5MnO4 and Study of Its Exchange Capability for Li+

Russian Journal of Applied Chemistry - The spinel-type composite metal oxide, magnesium-manganese-titanium oxide (Mg1.5Fe0.5MnO4), was prepared by the method of solid state crystallization. As a...     

Charge generation and electrostatic equilibrium for single granules during sliding

Electrostatic phenomena are commonly observed in the processing of solids. However, the working mechanism of electrostatic charge generation for single granules and particularly, their electrostatic equilibria have not been properly understood. In this work, repeated-sliding charging experiments with single granules were investigated for their electrostatic generation particularly from the perspective of triboelectrification equilibrium. Factors including granule length-ratio, sliding face shape, sliding times, sliding area, sliding velocity, front-facing edge, and sliding-plate inclined-angle were found to have an obvious effect on granule charge generation. Length-ratio and sliding area have significant effects as the granules evolved toward an equilibrium state. Equilibrium charge is suggested as a variable expressing the charging propensity of the material. In addition, under the same working conditions, a semi-cylindrical granule generates greater charge than a rectangular granule.     

吸波材料与微波暗室问题的数学模型

为分析尖劈形材料的吸波性能,建立了半圆镜像模型将辐射波在尖劈空间的传播等效为射线对等分半圆的切割,确定了反射波线和吸波材料几何参数之间的解析关系.对于微波暗室问题,假设在余弦辐射体上随机选取一个方向的能量波束集中了其所有能量,分别建立了加权能量分布模型和Monte Carlo模型,仿真验证了两模型结论的一致性.