微波消解电感耦合等离子体质谱法测定桃中稀土元素及其分布

以市场销售的桃为实验材料,利用微波消解电感耦合等离子体质谱法(ICP-MS)同时测定桃中稀土元素的含量。样品经过硝酸-氢氟酸-双氧水微波消解,实现了桃中16种稀土元素的测定。各元素的检出限在0.004~0.020μg·g-1之间,方法精密度在0.78%~2.96%,回收率在95.0%~106.0%之间。比较了稀土元素在果皮和果肉中的分布。结果表明,稀土元素在果皮中的含量明显高于果肉。本法快速、准确,可用于桃等水果中稀土元素的测定。     

深海富钴结核微区X射线荧光光谱分析和数据挖掘

西太平洋富钴结核是近年来新发现的海底固体矿产资源,富含Mn,Fe,Co,Ni和Cu等多种关键金属元素。富钴结核是一种非均质的地球化学和矿物学集合体,粒径约6 cm的结核在生长过程中记录了数千万年的海洋沉积历史,亟需高分辨率的分析技术揭示古海洋环境信息。采用微区X射线荧光光谱仪（μ-XRF）,对C3BC1704富钴结核开展多元素面扫描,获得了原位高分辨率多元素的信号强度数据,评价了μ-XRF技术在富钴结核中的应用质量。元素信号谱峰特征和数据频谱分布结果显示,富钴结核中Mn,Fe,Ti,Co,Ca和Ni等元素信号强度敏感,数据呈现相对较好的正态分布特征,可用于定量或半定量分析;Si,Cu和Al等元素信号较弱,数据呈现左偏的正态分布特征,建议相关数据仅作参考。μ-XRF获得的数据量庞大且彼此独立,本研究将不同元素连接成彼此关联的多维矩阵,实现了数据的位置信息和特征元素之间的数学运算和筛选,了解了金属元素的分布和变化特征,揭示了富钴结核生长过程的环境变化。结果显示,Mn和Fe等元素在生长层中波动剧烈,金属元素在富钴结核中的分布极不均匀,显示出多成因类型的交替微层和7个大的生长周期旋回。C3BC1704富钴结核主体暴露在海水中,金属元素主要来自海水,化学组成指示为典型的水成成因。进一步定量分析结果显示,Mn,Cu和Ni等元素含量从内部向外围呈现同步降低的趋势,Fe,Ti和Co等元素含量则呈现同步升高的趋势,这些特征指示早期偏向于成岩富集环境,晚期则以水成富集为主。富钴结核金属元素的分布和变化特征,清晰呈现了富钴结核的生长结构,揭示了富钴结核生长过程的环境变化,有利于富钴结核的成矿模型的构建。     

基于PCA的土壤Cd含量高光谱反演模型对比研究

土壤重金属污染对人类健康造成了极大的威胁,如何快速摸清土壤污染情况尤为重要。高光谱遥感具备光谱分辨率高,快速无损等优势,使其在土壤组分反演方面具有巨大的潜力。针对高光谱信息冗余及光谱变换对土壤镉（Cd）含量估算的影响进行分析,并利用变换前后的高光谱数据对比研究了不同高光谱模型对土壤Cd含量反演的性能。首先利用等离子体质谱法和FieldSpec4地物光谱仪收集了56组土壤样品的Cd含量和对应的高光谱曲线（350～2 500 nm）;为了弱化光谱测定中光亮变化和土壤表面凹凸对实验结果的影响,研究对高光谱数据进行倒数对数预处理;考虑到高光谱数据中存在大量的信息冗余,研究采用了主成分分析（PCA）对高光谱数据进行降维处理并最终保留了前12个主成分量作为特征变量。针对高光谱反演模型,研究选择了偏最小二乘（PLSR）、支持向量机（SVM）、人工神经网络（ANN）和随机森林（RF）四种回归模型建立PCA主成分与Cd含量之间的关系;最后,研究选取了决定系数（R2）、均方根误差（RMSE）和RPD三种精度评估指标评估回归模型的拟合精度,结果表明针对光谱采用PCA波段降维的方法处理后,选取的12个主成分对变化前后的光谱累计贡献率均达到99.99%,作为模型的输入变量,四种模型均具有一定的预测能力。无论光谱变换与否,PCA-RF反演模型的预测能力均为最好（R2分别为0.856和0.855,RPD均高达3.39）。利用PCA对高光谱数据降维处理可以有效降低高光谱数据冗余,有力的保证模型的预测能力。以PCA筛选出的主成分量可以作为模型极好的输入变量,以RF为基础的高光谱反演模型在反演土壤Cd含量时具有最佳效果,可为该区域及类似地区的土壤重金属污染物反演提供新的方法支撑。     

Luminescence lifetimes in quartz: dependence on annealing temperature prior to beta irradiation

It is well known that the thermal history of a quartz sample influences the optically stimulated luminescence sensitivity of the quartz. It is found that the optically stimulated luminescence lifetime, determined from time resolved spectra obtained with pulsed stimulation, also depends on past thermal treatment. For samples at 20°C during stimulation, the lifetime depends on beta dose and on duration of preheating at 220°C prior to stimulation for quartz annealed at 600°C and above, but is independent of these factors for quartz annealed at 500°C and below. For stimulation at higher temperatures, the lifetime becomes shorter if the sample is held at temperatures above 125°C during stimulation, in a manner consistent with thermal quenching. A single exponential decay is all that is required to fit the time resolved spectra for un-annealed quartz regardless of the temperature during stimulation (20–175°C), or to fit the time resolved spectra from all samples held at 20°C during stimulation, regardless of annealing temperature (20–1000°C). An additional shorter lifetime is found for some combinations of annealing temperature and temperature during stimulation. The results are discussed in terms of a model previously used to explain thermal sensitisation. The luminescence lifetime data are best explained by the presence of two principal luminescence centres, their relative importance depending on the annealing temperature, with a third centre involved for limited combinations of annealing temperature and temperature during stimulation.     

Organized molecular assemblies for scanning probe microscope lithography

Nanostructures down to a few ten nanometers in size have been fabricated with Langmuir–Blodgett (LB) films and self-assembled monolayers (SAMs) using scanning probe microscope lithography. The SAMs have been prepared with organosilane and bipolar amphiphiles, alkanethiol molecules as ultrathin resists on Si and Au substrates. The LB films on silicon substrates using both the polymer of thiophene derivatives and the mixture of palmitic acid and hexadecylamine were prepared and fabricated. The effect of functional groups of molecules on the atomic force microscope (AFM) anodization has been studied in the optimized process conditions. Applied voltage between the AFM tip and sample, the scanning speed and the relative humidity in the laboratory are also important factors for nanometer-scale lithography of the ultrathin films. The STM lithography with an octadecanethiol SAM on Au film in the air was carried out at the pulse mode of tip bias with respect to the suitability of STM lithography. The high structural orderness and perfect thickness of ultrathin organic molecular assemblies are the major advantages as required for nanoscale lithography.     

Thermodynamic properties of {(NH4)2SO4(aq) + Li2SO4(aq)} and {(NH4)2SO 4(aq) + Na2SO4(aq)} at a temperature of 298.15 K

The water activities and osmotic coefficients of aqueous solutions of {(NH₄ )₂SO ₄ +  Li ₂SO ₄} and {(NH₄ )₂SO ₄ +  Na ₂SO ₄} have been determined at a temperature of 298.15 K with a hygrometric method, at molalities in the region 0.2 mol · kg ^− 1 to saturation of the solutes for different fractional ionic-strengthsy =  0.2, 0.5, and 0.8 of (NH ₄)₂SO ₄. The experimental results are compared with the predictions obtained from our extended compared additivity model, as well as the models reported by Zdanovskii, Stokes and Robinson, Pitzer, and Lietzke-Stoughton. From these measurements, parameters of Pitzers model have been determined. These were used to predict solute activity coefficients in the mixture and calculate the excess Gibbs function at total molalities for different y for these systems.     

Ultrasonic waves in layered anisotropic media: characterization of multidirectional composites

An efficient and stable recursive compliance/stiffness matrix algorithm is presented to model wave propagation in multidirectional composites. The models are applied to clarify angle beam transmission through a multidirectional composite and to process ultrasonic data for determination of the elastic properties of a composite lamina (single ply) from measurements on a multidirectional composite. Ultrasonic characterization of composites using double-through-transmission and time-resolved line focus acoustic microscopy has been addressed. The double-through-transmission measurements and simulations show that the transmission amplitude is highly dependent on ply orientation and angle of incidence. The transmission amplitude decreases rapidly with incident angle deviation from the normal; however, a transmission window is found in the incident angle range 45–60° at frequencies below 2.25 MHz. The time-delay measurements by the double-through-transmission technique have been used to reconstruct lamina properties using the Floquet wave concept. A unidirectional lamina elastic properties measurement using line focus acoustic microscopy of a multidirectional composite sample is also briefly discussed. The effective elastic properties for the composites are determined from the lamina properties by a Floquet wave dynamic homogenization method.     

Dynamics of counterpropagating waves in parametrically driven systems: dispersion vs. advection

The dynamics of parametrically driven counterpropagating waves in a one-dimensional extended nearly conservative annular system are described by two coupled, damped, parametrically driven nonlinear Schrödinger (NLS) equations with opposite transport terms due to the group velocity, and small dispersion. The system is characterized by two length scales defined by a balance between (a) forcing and dispersion (the dispersive scale), and (b) forcing and advection at the group velocity (the transport scale). Both are large compared to the basic wavelength of the pattern. The dispersive scale plays an important role in the structure of solutions arising from secondary instabilities of frequency-locked spatially uniform standing waves (SW), and manifests itself both in traveling pulses or fronts and in extended spatio-temporal chaos, depending on the signs of the dispersion coefficient and nonlinearity.     

微区X射线荧光成像技术在岩心分析中的应用

微区X射线荧光（Micro-XRF）分析技术是通过微小的X射线光束照射样品，对样品进行原位成分观测的无损分析手段之一，具有灵敏度高、速度快和准确性高的特点。采用微区X射线荧光光谱仪（M6 JETSTREAM）对安徽铜陵冬瓜山铜矿床四段岩心样品进行面扫描，分析不同矿层共17种元素区域分布特征、空间分布规律及组合关系等，结果表明：（1）Cu和Fe两种成矿元素高值空间分布区域基本不重叠，S与Fe分布范围高度重叠，关系密切，微量元素Ni，Bi，Pb，Zn，Si，Na与Cu密切相关，而Ti，Al，K与Fe具有弱相关性；（2）垂向上，Fe元素含量随深度增加逐步增大，而Cu元素含量呈降低趋势，其他元素也随深度呈下降趋势；（3）元素分布受石炭纪中期海底喷流沉积成矿作用和岩浆热液成矿作用叠加改造作用明显；（4）该钻孔矿石矿物以磁黄铁矿、黄铜矿和黄铁矿为主，垂向上组合规律明显，脉石矿物以石英、石榴子石和透辉石为主。该技术通过分析元素空间分布规律、相关性以及矿物组合和分配关系等可对元素富集和运移以及对矿床的成矿机制、成因模式等地质环境和地质过程提供新认识和新证据。结合矿床地球化学特征的分布模式，微量元素可作为寻找主矿种的指示元素，为深部找矿提供依据。此外，该技术能作为预分析技术快速筛选出感兴趣的信息和位置，为后期各种更高精度的微区分析提供不同尺度、不同层次的元素分布信息。     

A novel mixed-metal borate with large [B12O18(OH)6]6- motif: Synthesis,structure and property

A new mixed-metal polyborate, Na₅Li[B₁₂O₁₈(OH)₆]·2H₂O (1), has been synthesized using solvothermal method and characterized by IR spectroscopy, thermogravimetric analysis, UV–Vis spectroscopy, powder and single-crystal X-ray diffraction, respectively. It crystallizes in the trigonal space group R-3c (No. 167) with unit cell parameters of a = b = 9.6767(6) Å, c = 36.358(5) Å, and Z = 6. Its structure features unprecedented 3D framework constructed from novel honeycomb-shaped inorganic Na-O sheets with unique 12-MR sodium rings and supramolecular polyborate 2D layers of lithium-centered [B₁₂O₁₈(OH)₆]^6-. UV–Vis spectral characterization indicates that compound 1 is a wide-band-gap semiconductor.