Resolution improvement for enhancing interference fringes of digital holograms with near infrared illuminance

A new resolution improving method of enhancing the interference stripes, which can achieve better reconstruction of the recorded object of infrared digital holography has been proposed in this paper. The experiment is conducted under near infrared illuminance. We create poor quality holograms with very low-resolution interference stripes and enhance it with our new method. The processed holograms have much higher-resolution interference stripes. This method is based on interpolation theory, and we make it works fast, stable and easy to apply. Both the forward and backward interpolation of the oriental and portrait direction of the source pixels have been calculated, and have been used to realize the final aim of resolution improvement. During the experiment, since the responsivity of the CCD is not satisfied with the illuminance laser, which is by design, we also give specific analysis on the experimental setup of our work to make sure the object information can be fully recorded by the optical setup but cannot be reconstructed because of the low-resolution and unobvious of the interference stripes. After the resolution improvement process of the original hologram, the object information can then be fully reconstructed, which is very clear in the paper. Figures and dataflow give evidence and demonstrate the good performance of our method.     

Polarized SERS Controlled by Anisotropic Growth on Ordered Curvature Substrate

Colloidal lithography is an efficient and low-cost method to prepare an ordered nanostructure array with new shapes and properties. In this study, square-shaped and cone-shaped Au nanostructures were obtained by 70° angle deposition onto polystyrene bead array with the diameter of 500 nm when a space of 120 nm is created between the neighbor beads by plasma etching. The gaps between the units decrease when the Au deposition time increases, which leads to the polarized enhanced local field, in agreement with the surface-enhanced Raman scattering spectra (SERS) observations and finite-difference time-domain (FDTD) simulations. When the Au deposition time increased to 5 min, 5 nm gaps form between the neighbor units, which gave an enhancement factor of 5 × 10⁹. The SERS chip was decorated for the detection of the liver cancer cell marker Alpha-fetoprotein (AFP) with the detection limit down to 5 pg/mL.     

Frequency aspects of the THz photomixer

In the paper methods of the terahertz photomixer operational frequency estimation are considered. Three methods are investigated — estimation of the frequency via direct measurements of the laser heterodyne compounds, via calculations from datasheets, and via calculations from raw collected data obtained from the photomixer system.     

Generation of stable and high-quality frequency-locked carriers based on improved re-circulating frequency shifter

An optical multicarrier generator based on the improved re-circulating frequency shifter (RFS) to generate a larger number of frequency-locked carriers with high-quality has been studied. By eliminating the third-order crosstalk components, the output carrier's number and optical signal-to-noise-ratio (OSNR) of the generator have been improved significantly. In addition, the maximum output OSNR and optimal radio-frequency drive voltages in the cases of different desired carrier numbers have been obtained. Using the improved configuration, 130-tone with high-quality (tone-to-noise ratio ～20 dB and superior flatness <3 dB) where the drive voltage is only around 0.5Vπ can be achieved. The simulation results show a good agreement with the theoretical analysis. The multicarrier generator based on the improved RFS has the potential application in the terabit superchannel optical transmission.     

Cr4+:YAG passively Q-switched c-cut Nd:YVO4 self-Raman laser at 1168.6 nm

We demonstrate the first Cr⁴⁺:YAG passively Q-switched c-cut Nd:YVO₄ self-Raman laser at 1168.6 nm based on the Stokes shift of 816 cm⁻¹. At the pump power of 4.7 W, the maximum output power of the Stokes line at 1168.6 nm is 270.5 mW, corresponding to an optical conversion efficiency of 5.8%. The pulse width, pulse repetition rate, pulse energy and peak power are 8.8 ns, 35.8 kHz, 7.6 μJ and 0.86 kW, respectively. At the pump of 5.0 W, the Stokes line at 1097.2 nm based on Raman shift of 259 cm⁻¹ also appears.     

Unpredictable adsorption and visible light induced decolorization of nano rutile for the treatment of crystal violet

Photocatalysts containing different ratios of anatase and rutile are prepared via heat treatment of Degussa P-25 titania. X-ray diffraction (XRD), Bruuauer-Emmett-Teller (BET), ultraviolet–visible light diffuse reflectance spectra (DRS), Raman spectra (Raman), positron annihilation lifetime spectra (PAL) and temperature-programmed desorption (TPD) are applied to investigate the phase composition of the synthesized catalysts. Using crystal violet (CV) as the target pollutant, the unexpected visible light decolorization of rutile is observed. Despite the decreased specific surface area, the as-synthesized rutile samples exhibit much higher adsorption capability of CV than P-25 does, which in turn leads to improved photoreaction efficiency. Since the rutile samples can't absorb the visible light, the degradation under visible light irradiation is attributed to self-sensitization of CV on the surface of rutile.     

Domino Radical Addition/Oxidation Sequence with Photocatalysis: One‐Pot Synthesis of Polysubstituted Furans from α‐Chloro‐Alkyl Ketones and Styrenes

A new domino reaction has been developed that allows the combination of styrenes and α‐alkyl ketone radicals to afford a wide array of polysubstituted furans in good to excellent yields under mild and simple reaction conditions. The key to success of this novel protocol is the use of photocatalyst fac‐Ir(ppy)₃ and oxidant K₂S₂O₈. Mechanistic studies by a radical scavenger and photoluminescence quenching suggest that a radical addition/oxidation pathway is operable.     

Plasmonic nanostructures for local field enhancement in the UV region

In this work we describe an ultraviolet subwavelength focusing in plasmonic nanostructures. A system which provides a 20–25 times local field enhancement at a wavelength of 350 nm is proposed. This system represents a metalized V-shaped groove in a surface of a dielectric medium. Subwavelength focusing is achieved by a plasmon wave propagation along the surface of metal film and by the transfer of electromagnetic field through the dielectric medium. The influence of system parameters on a local field enhancement is investigated. A simplified model that allows for determining the geometric parameters of an optimized resonator is proposed.     

Synthesis and photophysical studies of heteroaryl substituted-BODIPy derivatives for biological applications

Mono and di-heteroaryl-4,4′-difluoro-8-(aryl)-4-bora-3a,4a-diaza-s-indacene (BODIPy) (1–5) were synthesized using Suzuki–Miyaura couplings. Hetero aryl substitution on 3- or 3,5-positions caused large bathochromic shifts (up to ∼150 nm) in absorption (569–652 nm) and fluorescence maxima (586–679 nm) in comparison to classical BODIPy. Quantum yields were found to be as high as 0.65. Singlet oxygen production activities of these compounds were studied by monitoring the absorbance quenching of 1,3-diphenylisobenzofuran, on exposure to light (>600 nm). Cellular uptake of compound 4 was demonstrated using cervical cancer cells and fibroblast cell line and was confirmed by the images obtained using confocal microscope.