An Efficient Synthesis of Dicarbonyl (η5—Cyclopentadien—YL)Iron(II) Complexes of Two Cyclic Enol Ethers

An efficient synthesis of dicarbonyl(η⁵—cyclopentadienyl)iron—(II)—complexes of 2,3—dihydrofuran and 3,4—dihydro—2H—pyran from 3—bromo—2—methoxytetrahydrofuran and—pyran, respectively, is described.     

Assessment of mobility of heavy metals in two soil types by use of column leaching experiments and chemometric evaluation of elution curves

The objectives of this study were to evaluate the mobility of heavy metals (HMs) in two types of soils (acidic forest soil and neutral agricultural soil) by leaching with calcium chloride solution in column experiments. The screening properties of neutral agricultural soil towards pollution by heavy metals (Ni, Cu, Zn and Cd) are approximately 10 times higher than those of acid forest soil. The neutral agricultural soil, polluted artificially by one pore volume (PV) of an HMs solution of concentration 200 mg L^?1, can screen the leaching of these metals over several hundreds of years. The higher apparent desorption rate and per cent desorption of HMs (especially Cd) in acid forest soil indicated a higher potential of intensive migration of the metals across the profile and indicated potential risk of Cd pollution for this type of soil. The latest approach of artificial neural networks to describe transport of HMs in soil has been also evaluated. Using a simple three-layer perceptron topology with three hidden neurons, the experimental data could be simulated. The results suggested that the pH of soil is a major factor controlling the retention of the heavy metals in the soils.     

A New Procedure for Highly Regio‐ and Stereoselective Iodoacetoxylation of Protected Glycals and α‐1,2‐Cyclopropanated Sugars

Protected glycals and α‐1,2‐cyclopropanated sugars were converted in high yields and selectivities in less than 2 h at low temperatures to 2‐deoxy‐2‐iodoglycosyl acetates or novel 2‐deoxy‐2‐iodomethylglycosyl acetates using the simple, inexpensive reagent mixture of ammonium iodide, hydrogen peroxide, and acetic anhydride/acetic acid in acetonitrile. The protected glycals gave rise to 2‐deoxy‐2‐bromoglycosyl acetates when ammonium bromide was used instead of the iodide, although longer reaction times were required and selectivities were inferior. Other simple olefins such as styrene and indene were also converted to their corresponding 1,2‐trans‐iodoacetates.     

Nanocomposite of CeVO4/BiVO4 Loaded on Reduced Graphene Oxide for the Photocatalytic Degradation of Methyl Orange

A facile procedure, involving one-pot synthesis of CeVO₄/BiVO₄ and in-situ reduction of graphene oxide (GO), has been used to prepare CeVO₄/BiVO₄/rGO nanocomposites. Different ratios of the CeVO₄–BiVO₄ were prepared to afford composites represented as CBVG3, CBVG5, and CBVG7. The ternary nanocomposite materials were characterized by using powder X-ray diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), photoluminescence and UV–vis spectroscopic techniques. Photocatalytic efficiency of the as-prepared ternary nanocomposites was investigated through the photo degradation of methyl orange under a visible light irradiation at 470 nm. The photocatalytic performance was enhanced by loading the CeVO₄/BiVO₄ nanoparticles on reduced graphene oxide (rGO), given MO degradation rate of 57, 65, 80, and 90% for BVG, CBVG3, CBVG5, and CBVG7, respectively after exposure to visible light for 120 min. Effects of experimental process parameters including initial dye concentration, catalysts loading and effect of different modification regimes were studied using CBVG7, which exhibited the highest efficiency. The improvement in the photocatalytic efficiency may be attributed to increased surface area of the nanocomposites, enhanced light absorption capacity and improved charge separation. The study showed a one-pot synthesis route to prepare promising CeVO₄/BiVO₄/GO nanocomposites for the photo-enhanced degradation of dye contaminants.

     

Optimization of Square Wave Voltammetry (SWV) Parameters by Design of Experiment (DoE) Methodologies for the Determination of Mifepristone at Glassy Carbon Electrode (GCE)

In the present study, an electroanalytical method that permits the optimization of factors affecting SWV for sensitive detection of mifepristone at glassy carbon electrode (GCE) using response surface methodology (RSM) with desirability function (DF) is presented. Factors selected for optimization after screening using full factorial design were frequency (X₁), amplitude (X₂), and pH (X₃). The central composite design as a response surface methodology with desirability function (DF) was applied for obtaining the optimum level. The optimum conditions were obtained as follows: Frequency (X₁=50 Hz), amplitude (X₂=33.4 mV), and pH (X₃=9.4), with an overall desirability function of 0.97. Subsequently, confirmatory experiments were performed in triplicates to validate the optimum conditions. The results obtained were satisfactory and agreed well with less only 11.9 % deviation from the values predicted by the model. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.54 and 1.80 ppm, respectively. The proposed method was applied for a quantitative determination of mifepristone in spiked tap water samples. The recovery tests showed that the detection of mifepristone at GC could be evaluated on environmental samples.     

Evaluating the antimicrobial activity and cytotoxicity of polydopamine capped silver and silver/polydopamine core-shell nanocomposites

Fabrication of bioactive nanomaterials with improved stability and low toxicity towards healthy mammalian cells have recently been a topic of interest. Bioactive metal nanomaterials such as silver nanoparticles (AgNPs) tend to lose their stability with time and become toxic to some extent, limiting their biological applications. AgNPs were separately encapsulated and loaded on the surface of a biocompatible polydopamine (PDA) to produce Ag-PDA and Ag@PDA nanocomposites to unravel the issue of agglomeration. PDA was coated through the self-polymerization of dopamine on the surface of AgNPs to produce Ag-PDA core-shells nanocomposites. For Ag@PDA, PDA spheres were first designed through self-polymerization of dopamine followed by in situ reduction of silver nitrate (AgNO3) without any reductant. AgNPs sizes were controlled by varying the concentration of AgNO₃. The TEM micrograms showed monodispersed PDA spheres with an average diameter of 238 nm for Ag-PDA and Ag@PDA nanocomposites. Compared to Ag@PDA, Ag-PDA nanocomposites have shown insignificant toxicity towards human embryonic kidney (HEK-293T) and human dermal fibroblasts (HDF) cells with cell viability of over 95% at concentration of 250 µg/mL. A excellent antimicrobial activity of the nanocomposites was observed; with Ag@PDA possessing bactericidal effect at concentration as low as 12.5 µg/mL. Ag-PDA on the other hand were only found to be bacteriostatic against gram-positive and gram-negative bacteria was also observed.     

Electronic structure theory investigation on the electrochemical properties of cyclohexanone derivatives as organic carbonyl-based cathode material for lithium-ion batteries

Organic carbonyl-based compounds with redox-active site have recently gained full attention as organic cathode material in lithium-ion batteries (LIBs) owing to its high cyclability, low cost, high abundance, tunability of their chemical structure compared to traditionally used inorganic material. However, the utilization of organic carbonyl-based compounds in LIBs is limited to its poor charge capacity and dissolution of lower molecular weight species in electrolytes. In this study, we theoretically investigated five set of cyclohexanone derivatives (denoted as: H₁, H₂, H₃, H₄, and H₅) and influence of functional groups (-F and -NH₂) on their electrochemical properties using advanced level density functional theory (DFT) with the Perdew-Burke-Ernzenhof hybrid functional (PBE0) at 6-31+G(d,p) basis set. In line with the result gotten, the HOMO-LUMO results revealed that compound H₅ is the most reactive among the studied cyclohexanone derivatives exhibiting energy gap values of 0.552, 0.532, 0.772 eV for free optimized structures and structurally engineered structures with electron withdrawing group (EWG) and electron donating group (EDG) respectively. Also, results from electrochemical properties of the studied compounds lithiated with only one lithium atom displayed that compound H₂ exhibited interesting redox potential and energy density for all the studied structures in free optimized state (1108.28 W h kg^?1, 4.92 V vs Li/Li⁺), with EWG (648.22 W h kg^?1, 3.313 V Li/Li⁺), and with EDG (1002.4 W h kg^?1, 5.011 V vs Li/Li⁺). From our result, we can infer that compound H₂ and H₃ with corresponding redox potential, energy density and theoretical charge capacity value of 4.92 V vs Li/Li⁺, 1108.28 W h kg^?1, 225.26 mA h g^?1 and 5.168 V, 1041.61 W h kg^?1, 201.55 mA h g^?1 lithiated with only one lithium atom in free optimized state are the most suitable compounds to be employed as organic cathode material in lithium-ion batteries among all the investigated cyclohexanone derivatives.     

Synthesis of Zinc Oxide Nanoparticles Using Rubus fairholmianus Root Extract and Their Activity against Pathogenic Bacteria

Recently, the biosynthesis of zinc oxide nanoparticles (ZnO NPs) from crude extracts and phytochemicals has attracted much attention. Green synthesis of NPs is cost-effective, eco-friendly, and is a promising alternative for chemical synthesis. This study involves ZnO NPs synthesis using Rubus fairholmianus root extract (RE) as an efficient reducing agent. The UV spectrum of RE-ZnO NPs exhibited a peak at 357 nm due to intrinsic bandgap absorption and an XRD pattern that matches the ZnO crystal structure (JCPDS card no: 36-1451). The average particle size calculated from the Debye–Scherrer equation is 11.34 nm. SEM analysis showed that the RE-ZnO NPs spherical in shape with clusters (1–100 nm). The antibacterial activity of the NPs was tested against Staphylococcus aureus using agar well diffusion, minimum inhibitory concentration, and bacterial growth assay. The R. fairholmianus phytochemicals facilitate the synthesis of stable ZnO NPs and showed antibacterial activity.     

Ultrasonically induced ZnO–biosilica nanocomposite for degradation of a textile dye in aqueous phase

In the present study, a porous clay-like support with unique characteristics was used for the synthesis and immobilization of ZnO nanostructures to be used as sonocatalyst for the sonocatalytic decolorization of methylene blue (MB) dye in the aqueous phase. As a result, the sonocatalytic activity of ZnO–biosilica nanocomposite (77.8%) was higher than that of pure ZnO nanostructures (53.6%). Increasing the initial pH from 3 to 10 led to increasing the color removal from 41.8% to 88.2%, respectively. Increasing the sonocatalyst dosage from 0.5 to 2.5 g/L resulted in increasing the color removal, while further increase up to 3 g/L caused an obvious drop in the color removal. The sonocatalysis of MB dye over ZnO–biosilica nanocomposite was temperature-dependent. The presence of methanol produced the most adverse effect on the sonocatalysis of MB dye. The addition of chloride and carbonate ions had a negligible effect on the sonocatalysis, while the addition of persulfate ion led to increasing the color removal from 77.8% to 99.4% during 90 min. The reusability test exhibited a 15% drop in the color removal (%) within three consecutive experimental runs. A mineralization efficiency of 63.2% was obtained within 4 h.