Sodium alginate/HPMC/liquid paraffin emulsified (o/w) gel beads,by factorial design approach; and in vitro analysis

The present study involved development of a novel sodium alginate (SA)/HPMC/light liquid paraffin emulsified (o/w) gel beads containing Diclofenac sodium (DS) as an active pharmaceutical ingredient and its site specific delivery by using hard gelatin capsule fabricated by enteric coated Eudragit L-100 polymer. Emulsified gel beads were formulated by 3-level factorial design, ionic gelatin method. The obtained beads were characterized by Fourier transform infrared, X-ray diffraction and Field emission scanning electron microscope analysis. The variables such as SA (X₁), HPMC (X₂), were optimized for drug loading and in vitro drug release with the help of response surface methodology (RSM). The RSM analysis predicted that SA was significant for both drug loading (p = 0.0005) and drug release (p = 0.0041). HPMC was only significant for drug release (p = 0.0154). The cross-product contribution (2FI) and quadratic model were found to be adequate and statistically accurate with correlation value (R²) of 0.9054 and 0.9450 to predict the drug loading and drug release respectively. An increase in concentration of HPMC and SA decreases the drug loading as well as the drug release. The obtained optimum values of drug loading and DS released were 7.43 % and 85.54 % respectively, which were well in agreement with the predicted value by RSM.     

α-Tocopherol-loaded Ca-pectinate microcapsules: Optimization, in vitro release, and bioavailability

We used response surface methodology to optimize microcapsule preparation conditions, including the ratio of pectin:α-tocopherol (TP) (X₁), emulsifier concentration (X₂), and CaCl₂ concentration (X₃) for maximal entrapment efficiency (EE) of TP-loaded Ca-pectinate microcapsules. The values of X₁, X₂, and X₃, optimized for maximal EE were a ratio of 9.7:6.3, and 1.33% and 5.09%, respectively. The experimental results obtained from the optimum formulation agreed with the predicted results, indicating the usefulness of models for EE. TP release from the Ca-pectinate microcapsules prepared according to the optimized conditions was slow and incomplete in simulated gastric fluid, whereas it was relatively rapid and considerably sustained in simulated intestinal fluid. An in vivo release study revealed that physical entrapment of TP within Ca-pectinate microcapsules can be a good technique to demonstrate the sustained release pattern of TP and to improve the bioavailability for TP following oral administration.     

Coordination compounds of N-(2-aminophenyl)- and N-(3-aminophenyl)pyridine-2′-carboxamide with cobalt(II) and cobalt(III). The nature of amide deprotonation induced by cobalt(III) in acidicpH

New complexes of the general formulae CoL ₂ X·nH₂O (X=Cl, Br, I, NCS, NO₃ andn=0, 1, 2 or 3), Co₂ L ₂ X ₃·EtOH (X=Cl, Br, I, NCS), Co(DH)X ₂ (X=NCS, NO₃) and Co(DH)₂ X ₂ (X=NCS, I) have been prepared, whereLH=N-(2-aminophenyl)pyridine-2-carboxamide andDH=N-(3-aminophenyl)pyridine-2-carboxamide. The compounds were characterized by X-ray powder patterns, conductivity measurements, thermogravimetric analysis, magnetic properties as well as by IR, ligand field and¹H-NMR spectroscopy. In the presence of oxygen,LH undergoes a cobalt(III) ion promoted amide hydrogen ionization in thepH region 4–6.

---

Koordinationsverbindungen von N-(2-aminophenyl)- und N-(3-aminophenyl)pyridin-2-carboxamid mit Cobalt(II) und Cobalt(III). Die Natur der Deprotonierung von Amiden induziert von Cobalt(III) in saurem Medium

Zusammenfassung Neue Komplexe der allgemeinen Formeln CoL ₂ X·nH₂O (X=Cl, Br, I, NCS, NO₃ undn=0, 1, 2, 3), Co₂ L ₂ X ₃·EtOH (X=Cl, Br, I, NCS), Co(DH)X ₂ (X=NCS, NO₃) und Co(DH)₂ X ₂ (X=NCS, I) wurden dargestellt mit LH=N-(2-aminophenyl)pyridin-2-carboxamid undDH=N-(3-aminophenyl)pyridin-2-carboxamid. Die Verbindungen wurden mittels Röntgenstrukturanalyse, Leitfähigkeitsmessungen, thermogravimetrischen Analysen, magnetischen Eigenschaften sowie mit IR-, Ligandenfeld- und¹H-NMR-Spektroskopie charakterisiert. In Gegenwart von Sauerstoff unterliegtLH einer Cobalt(III)ion-induzierten Amidwasserstoffionisierung impH-Bereich 4–6.

     

Doubly-bridged binuclear complexes of oxomolybdenum(V) and oxotungsten(V) containing sexadentate ligands

Binuclear oxomolybdenum(V) and oxotungsten(V) complexes of the type, [M ₂(O)₂(-X)(-X ¹)], where M=Mo, W;X.X ¹=O, S; L=edta, pdta (n=2-), tpen, tppn (n=2+) (edta^4– =ethylenediaminetetraacetate(4–), pdta=R- orR,S-propylenediaminetetraacetate(4–), tpen=N,N,N ¹,N¹-tetrakis(2-pyridyhnethyl)-ethylenediamine, and tppn=R- orR,S-N,N,N ¹,N¹-tetrakis(2-pyridylmethyl)-propylenediami ne) are reviewed with respect to their preparation, structure, spectroscopic properties, reactivities, and in particular asymmetric distortion around the bicyclo [4.1.1 ] type core and stereoselectivity related to this distortion,Dedicated to Professor Jiaxi Lu on the occasion of his 80th birthday and in recognition of his pioneering contributions.     

Thermal behaviour of platinum(II) complexes of diethyl and monoethyl 2-quinolylmethylphosphonates

Summary Thermal study of the molecular and ionic platinum(II) complexes of diethyl (2-dqmp) and monoethyl (2-Hmqmp) ester of 2­quinolylmethylphosphonic acid: dihalide adducts trans-PtL₂X₂ (L=2-dqmp, X=Cl, Br; L=2-Hmqmp, X=Cl), methylquinolinium tetrahaloplatinates [LH⁺]₂[PtX₄^2-] (L=2-dqmp, X=Cl, Br; L=2­Hmqmp, X=Cl, Br), methylquinolinium hexahalodiplatinates [LH⁺]₂[Pt₂X₆^2-](L=2-Hmqmp, X=Cl, Br) and chelate complex Pt(2­mqmp)₂·2H₂O, has been carried out using TG-DTA techniques and the infrared spectroscopic study. There are great differences in the thermal behaviour between various types of complexes, especially between the molecular and the ion-pair salt complexes.     

Determination of N-methylcarbamate insecticides in water samples using dispersive liquid–liquid microextraction and HPLC with the aid of experimental design and desirability function

A rapid and simple method for the extraction and preconcentration of N-methylcarbamates (NMCs) (carbofuran, carbaryl and promecarb) in water samples using dispersive liquid–liquid microextraction (DLLME) using chemometrics was developed. Influence variables such as volume of extracting (CHCl₃) and dispersing solvents (ACN), pH and ionic strength, extraction time and centrifugation time and speed were screened in a 2^7–4 Plackett–Burman design was investigated. The significant variables were optimized by using a central composite design (CCD) combined with desirability function (DF). At optimum conditions values of variables set as 126 μL chloroform, 1.5 mL acetonitrile, 1 min extraction time, 10 min centrifugation at 4000 rpm min⁻¹, natural pH, 4.7% (w/v) NaCl, the separation was reached in less than 14 min using a C₁₈ column and an isocratic binary mobile phase (acetonitrile: water (50:50, v/v)) with flow rate of 1.0 mL min⁻¹. At optimum conditions method has linear response over 0.001–10 μg mL⁻¹ with detection limit between 0.0001 and 0.0005 μg mL⁻¹ with relative standard deviations (RSDs) in the range 2.18–5.06% (n = 6).     

对氨基苯甲酸热力学性质的量热和热分析研究

在80～400 K温区,用高精度全自动绝热量热仪测定了对氨基苯甲酸摩尔热容,得到摩尔热容随温度的变化的关系式为：     

An easily organic–inorganic hybrid optical sensor based on dithizone impregnation on mesoporous SBA‐15 for simultaneous detection and removal of Pb(II) ions from water samples: Response‐surface methodology

In this study, a novel organic–inorganic hybrid adsorbent for single‐step detection and removal of Pb(II) ions based on dithizone (DZ) anchored on mesoporous SBA‐15 was fabricated. The designed solid optical sensor revealed rapid colorimetric responses and high selectivity. Central composite design (CCD) combined with desirability function (DF) was applied to evaluate the interactive effects and optimization of important variables such as pH value, mesoporous SBA‐15 dosage, contact time and initial concentration of Pb(II) ions and optimum conditions for each of the factors were obtained 6.0, 25 mg, 30 min and 20 μg ml^{− 1}, respectively. This adsorbent or solid optical chemo sensor exhibited a linear range of 1.0 to 100.0 μg ml⁻¹ of Pb(II) ion concentration with a detection limit of 0.07 μg ml⁻¹. This adsorbent was applied to determine and remove the Pb(II) in spiked samples. Various isotherm models such as Langmuir, Freundlich, Temkin and Dubinin–Radushkevich were studied for fitting the experimental equilibrium data. Langmuir model was chosen as an efficient model. Various kinetic models such as pseudo‐first, second order intraparticle, diffusion models were studied for analysis of experimental adsorption data and the pseudo second order model was chosen as an efficient model.     

Synthesis,characterization, and thermal behavior of palladium(II) coordination compounds containing isonicotinamide

Palladium(II) coordination compounds of general formula trans-[PdX₂(isn)₂], X = Cl⁻ (1), N₃ ⁻ (2), SCN⁻ (3), NCO⁻ (4), isn = isonicotinamide; were synthesized and characterized in solid state by elemental analysis, infrared spectroscopy, and simultaneous TG–DTA. TG experiments reveal that the compounds 1–4 undergo thermal decomposition in three or four stages, yielding Pd⁰ as final residue, according to calculus and identification by X-ray powder diffraction.     

Komplexbildung mit 1,2-bis (o-Aminobenzylidenamino)-ethan als neutralem Liganden

Compounds [Co(H₂ L]X ₂(X=Cl, Br, I, NO₃, ClO₄), [Co(H₂ L–Br₂)]Br₂, [Co(H₂ L–Br₂)·py ₂]Br₂ and [Co(H₂ L)Cl]Cl₂ were isolated. They were investigated by means of thermoanalysis, IR and VIS spectroscopy, magnetochemistry and molar conductivity.

     

Ab initio study of spin–orbit interaction in the ground electronic states of XH (X = C, Si, Ge and Sn) molecules

Electronic structure and spectroscopic properties for the ground electronic states of CH, SiH, GeH and SnH molecules were obtained using the multiconfigurational self-consistent field followed by spin–orbit multireference multistate perturbation theory. Spin–orbit splitting calculations for ground states of the four molecules were carried out with model core potential (MCP) and all-electron (AE) methods. MCP results are compared with corresponding AE values to estimate the accuracy of the saving cost MCP calculations. The potential energy curves, calculated for the Ω states CH(X₁²Π_1/2 and X₂²Π_3/2), SiH(X₁²Π_1/2 and X₂²Π_3/2), GeH(X₁²Π_1/2 and X₂²Π_3/2) and SnH(X₁²Π_1/2 and X₂²Π_3/2) using the MCP method, were fitted to analytical potential energy function using Murrell–Sorbie potential energy function. Based on the analytical potential energy function, force constants and spectroscopic constants for the Ω states were obtained.     

Metal–metal bond cleavage of carbene complexes by halogens: The crystal and molecular structures of ax-[Mn2(CO)9{C(OEt)2-thienyl}], [Mn(CO)4(I){C(OEt)2-thienyl}] and eq-[Mn2(CO)9{C(NH2)2-thienyl}]

The metal–metal bond in [M₂(CO)₉{C(OEt)R}] (M = Mn (1), Re (2), R = 2-thienyl (a), 2-bithienyl (b)) is readily cleaved with halogens to afford cis-[M(CO)₄(X){C(OEt)R}] (M = Mn (3), X = I; M = Re (4), X = Br). In the binuclear manganese complex, the carbene ligand is found in an axial position due to steric reasons, whereas the electronically favoured equatorial position is found for the carbene ligands in the corresponding rhenium complexes and in [Mn₂(CO)₉{C(NH₂)thienyl}] (5a), containing a sterically less demanding NH₂-substituent.     

Response surface methodology approach for the preparation of a molecularly imprinted polymer for solid‐phase extraction of fenoxycarb pesticide in mussels

The aim of this work was to develop an efficient method for the selective extraction and analysis of fenoxycarb, a carbamate pesticide, in mussel samples using a molecularly imprinted solid‐phase extraction device. The optimization of molecularly imprinted polymer synthesis was performed using the experimental design under the response surface methodology approach. A fast rebinding study and Freundlich isotherm adsorption were carried out to calculate binding capacity B, site number n, and affinity constant K_f. The optimum molecularly imprinted polymer was successfully used as sorbent of a solid‐phase extraction cartridge for the determination of fenoxycarb in real mussel samples. The range of linearity was 0.3–30 mg/L with a correlation coefficient of 0.991. The limit of detection was 0.247 mg/kg. The recovery of fenoxycarb extracted from mussel samples of Mediterranean sea was 97% (n = 3) with relative standard deviation between 6 and 7% proving the reliability of the developed method.     

Thermal decomposition of complexes of cadmium(II) and mercury(II) with triphenylphosphanes

A series of substituted triphenylphosphane complexes of the type CdL₂X₂ (L= triorthotolylphosphane or trimetatolylphosphane; X=Cl⁻, Br⁻ or I⁻) and HgL₂X₂ (L=triphenylphosphane or triorthotolylphosphane) was prepared fresh. The thermal decomposition was carried out in air with heating rate programmed at 10°C min⁻¹ and it revealed that the complexes with ortho derivative were less stable and the triphenylphosphane moiety leaves along with halogen in the first step. All the complexes were stable up to 210°C. However, the stability order of the tetrahedral complexes was X=Cl>Br. Values of n, E, lnA and ΔS ^# have been approximated and compared. Complexes having Br have higher E _a, lnA and ΔS ^# values than that having Cl.     

Coordination compounds of Co(II), Ni(II) and Cu(II) with capric acid hydrazide

The reaction of aquo-ethanolic solutions of Co(II), Ni(II) and Cu(II) salts and ethanolic solution of capric acid hydrazide (L) yielded paramagnetic, high-spin bis- and tris(ligand) chelate complexes. The tris(ligand) complexes, [ML ₃]X ₂·nH₂O [M=Co(II), Ni(II);X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ], have an octahedral structure formed on account of the bidentate (NO) coordination of three neutral hydrazide molecules. In the bis(ligand) complexes,ML ₂(NCS)₂ [M=Co(II), Ni(II)] and CuL ₂ X ₂·nH₂O (X=NO ₃ ^– , ClO ₄ ^– and 1/2SO ₄ ^2– ), the oxoanions and NCS^– take also part in coordination. The complexes have been characterized by elemental analysis, IR spectra, magnetic measurements, molar conductivity and TG analysis.

---

Caprinsäurehydrazid-Komplexe von Co(II), Ni(II) und Cu(II)

Zusammenfassung Durch die Reaktion von wäßrig-ethanolischen Lösungen von Co(II)-, Ni(II)-und Cu(II)-Salzen mit einer ethanolischen Lösung von Caprinsäurehydrazid (L) wurden paramagnetische high-spin Bis- und Tris-Ligand-Chelatkomplexe erhalten. Tris-Ligand-Komplexe des Typs [ML ₃ X ₂·nH₂O [M=Co(II), Ni(II);X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ], die eine oktaedrische Struktur besitzen, entstehen durch die Koordination von drei neutralen zweizähnigen (NO)-Hydrazidmolekülen. Bei den Bis-Ligand-KomplexenML ₂(NCS)₂ [M=Co(II), Ni(II)], sowie bei den Bis-Ligand-Komplexen CuL ₂ X ₂·nH₂O (X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ) nehmen bei der Koordination außer Hydrazid auch die Säurereste teil. Die Komplexe wurden durch Elementaranalyse, IR-Spektren, magnetische Messungen, molare Leitfähigkeit und TG-Analysen charakterisiert.

     

Characterization of the potential energy surfaces of two small but challenging noncovalent dimers: (P2)2 and (PCCP)2

This work characterizes eight stationary points of the P₂ dimer and six stationary points of the PCCP dimer, including a newly identified minimum on both potential energy surfaces. Full geometry optimizations and corresponding harmonic vibrational frequencies were computed with the second‐order Møller–Plesset (MP2) electronic structure method and six different basis sets: aug‐cc‐pVXZ, aug‐cc‐pV(X+d)Z, and aug‐cc‐pCVXZ where X = T, Q. A new L‐shaped structure with C₂ symmetry is the only minimum for the P₂ dimer at the MP2 level of theory with these basis sets. The previously reported parallel‐slipped structure with C_2h symmetry and a newly identified cross configuration with D₂ symmetry are the only minima for the PCCP dimer. Single point energies were also computed using the canonical MP2 and CCSD(T) methods as well as the explicitly correlated MP2‐F12 and CCSD(T)‐F12 methods and the aug‐cc‐pVXZ (X = D, T, Q, 5) basis sets. The energetics obtained with the explicitly correlated methods were very similar to the canonical results for the larger basis sets. Extrapolations were performed to estimate the complete basis set (CBS) limit MP2 and CCSD(T) binding energies. MP2 and MP2‐F12 significantly overbind the P₂ and PCCP dimers relative to the CCSD(T) and CCSD(T)‐F12 binding energies by as much as 1.5 kcal mol^?1 for the former and 5.0 kcal mol^?1 for the latter at the CBS limit. The dominant attractive component of the interaction energy for each dimer configuration was dispersion according to several symmetry‐adapted perturbation theory analyses. © 2014 Wiley Periodicals, Inc.     

Poly (methacrylic acid)‐based molecularly imprinted polymer nanoparticles containing 5‐fluourouracil used in colon cancer therapy potentially

The objective of this work was to synthesize molecularly imprinted polymer (MIP) nanoparticles based on methacrylic acid (MAA) monomer with a high selectivity against an anti‐cancer drug, 5‐fluorouracil (5‐FU), as a template. In this case, the nanoparticles were prepared via precipitation polymerization in the presence of ethylene glycol dimethacrylate as cross‐linker and azobisisobutyronitrile as initiator. Besides, 3 independent variables including MAA: 5‐FU molar ratio (X₁), temperature (X₂), and time (X₃) were investigated utilizing response surface methodology. The scanning electron microscopy and dynamic light scattering resulted the average diameter of approximately 65 nm, and the MIP nanoparticle sample with the imprinting factor of 1.57 was polymerized in optimized conditions as follows: X₁ = 6: 1, X₂ = 60°C, and X₃ = 3 days in acetonitrile as porogenic solvent. Also, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis confirmed the formation of MAA/5‐FU complex and lower thermal stability of the washed MIP sample than the unwashed MIP and non‐imprinted polymer (NIP) samples, respectively. Moreover, the optimized MIP nanoparticles have more controlled release of 5‐FU rather than the NIP sample. Finally, the flow cytometry showed that 5‐FU‐loaded MIP sample has the highest apoptosis of human colon cancer cell line, HCT‐116, after 3 days compared with NIP sample and also the exclusive use of drug.     

Ruthenium Tris-pyrazolylborate Complexes XVII [1]. Structure and Bonding in a Series of Ruthenium Hydrido-tris-(pyrazolyl)-borate Cyclooctadiene Complexes

Summary.  The complexes RuTp(cod)X (X = Br⁻ (2), I⁻ (3), CN⁻ (4)) have been obtained by the reaction of RuTp(cod)Cl (1) with KX in boiling MeOH in high yields. The cationic complexes [RuTp(cod)(py)]⁺ (5), [RuTp(cod)(dmso)]⁺ (6), and [RuTp(cod)(CH₃CN)]⁺ (7) were prepared as the CF₃SO₃ ⁻ salts by reacting 1 with 1 equivalent of AgCF₃SO₃ in the presence of the respective co-ligand in CH₂Cl₂. The crystal structures of 1, 3, 4, 5, 6, and 7 are reported. Structural features are discussed in conjunction with ¹H, ¹³C, and ¹⁵N NMR spectroscopic data revealing a linear correlation of ¹⁵N chemical shifts and Ru-N (trans to X(L)) bond distances. Received August 31, 2000. Accepted (revised) October 23, 2000     

Darstellung und Charakterisierung von Halogeno(diethyldithiocarbamato) (triethyl- und triphenylphosphin)palladium(II)-Komplexen

The Complexes [Pd(PEt ₃)₂ dtc]X (1) and Pd(PR ₃)Xdtc (2, 3) (dtc=S₂CNEt ₃;X=Cl, Br, I;R=Et, Ph) have been prepared. Conductivity, susceptibility, UV and IR measurements show that the cations [Pd(PEt ₃)₂ dtc]⁺ of1 and the complexes2, 3 have square-planar structure.

     

Statistical analysis and optimization of photodegradation efficiency of methyl orange from aqueous solution using cellulose/zinc oxide hybrid aerogel by response surface methodology (RSM)

The photodegradation efficiency of cellulose-X/zinc oxide-Y (CA-X/ZnO-Y) aerogels was studied to degrade methyl orange (MO) as an organic dye pollutant from an aqueous solution under UV light irradiation. In this study, the initial pH of the solution (3, 7, and 11), the photocatalyst dosage (3, 6, and 9 g L^-1), the initial concentration of solution MO (10, 20, and 30 ppm), and the concentration of cellulose in CA-X/ZnO-Y hybrid aerogel (3, 6, and 9 wt%) were selected as four variable parameters, whereas the photoderadation performance was selected as the response. Moreover, the response surface methodology (RSM) analysis was carried out to investigate the influence of four various experimental factors at different times on the degradation of MO. The adequacy result of the proposed models displays that total of the proposed models can predict the photodegradation efficiency of MO by CA-x/ZnO-y aerogel. The optimization results of the process showed that pH = 3 and concentration of MO = 10 ppm, photocatalyst dosage (9 g L^-1), and MCC concentration (9 g) are the optimal level of the studied parameters. Also, the results showed that desirability of 0.96 confirms the acceptance and applicability of the model where the RSM model is a helpful technique for the optimum conditions design.