Rationally Investigating the Influence of T1 Location on Electroluminescence Performance of Aryl Amine Modified Phosphine Oxide Materials

The correspondence between triplet location effect and host‐localized triplet–triplet annihilation and triplet–polaron quenching effects was performed on the basis of a series of naphthyldiphenylamine (DPNA)‐modified phosphine oxide hosts. The number and ratio of DPNA and diphenylphosphine oxide was adjusted to afford symmetrical and unsymmetrical molecular structures and different electronic environments. As designed, the first triplet (T₁) states were successfully localized on the specific DPNA chromophores. Owing to the meso‐ and multi‐insulating linkages, identical optical properties and comparable electrical performance was observed, including the same first singlet (S₁) and T₁ energy levels to support the similar singlet and triplet energy transfer and the close frontier molecular orbital energy levels. This established the basis of rational investigation on T₁ location effect without interference from other optoelectronic factors.     

金红石相TiO_2纳米棒的氢化处理及其光催化活性

以钛酸四丁酯为钛源,通过盐酸调制的水热法制备出了具有棒状结构的金红石相纳米TiO2,并进一步进行高温氢化处理.采用X射线衍射(XRD),透射电镜(TEM),紫外-可见-近红外漫反射(UV-Vis-NIR DRS),电子顺磁共振(EPR)和表面光伏(SPS)等测试手段对样品进行表征,以气相乙醛和液相苯酚为目标污染物考察催化剂的光催化活性.结果表明:随着高温氢化处理时间的延长,TiO2样品的可见光吸收逐渐增强,其颜色逐渐由白色转变成灰色,这主要与引入的Ti3+/氧空位缺陷有关.表面光电压谱和羟基自由基测试表明,适当时间的氢化处理有利于光生电荷的分离.在光催化氧化降解气相乙醛和液相苯酚过程中,经适当时间氢化处理的样品表现出高的可见光催化活性.并且可见光催化活性的规律与紫外光下的是一致的.这是因为氢化处理后在导带底下方引入了缺陷能级,拓展了可见光响应.过度的氢化处理会在TiO2导带下方引入较低的缺陷能级,使光生电荷的复合加剧,导致光催化活性降低.     

Self‐Propelled Janus Mesoporous Silica Nanomotors with Sub‐100 nm Diameters for Drug Encapsulation and Delivery

The synthesis of an innovative self‐propelled Janus nanomotor with a diameter of about 75 nm that can be used as a drug carrier is described. The Janus nanomotor is based on mesoporous silica nanoparticles (MSNs) with chromium/platinum metallic caps and propelled by decomposing hydrogen peroxide to generate oxygen as a driving force with speeds up to 20.2 μm s^?1 (about 267 body lengths per second). The diffusion coefficient (D) of nanomotors with different H₂O₂ concentrations is calculated by tracking the movement of individual particles recorded by means of a self‐assembled fluorescence microscope and is significantly larger than free Brownian motion. The traction of a single Janus MSN nanomotor is estimated to be about 13.47×10^?15 N. Finally, intracellular localization and drug release in vitro shows that the amount of Janus MSN nanomotors entering the cells is more than MSNs with same culture time and particle concentrations, meanwhile anticancer drug doxorubicin hydrochloride loaded in Janus MSNs can be slowly released by biodegradation of lipid bilayers in cells.     

Synthesis,Structure and Magnetic Property of One Ni~Ⅱ Based Coordination Polymer

One new coordination polymer, [Ni(m-bix)(m-BDC)](1, m-bix = 1,3-bis(imidazol-1-ylmethyl)benzene, m-BDC = 1,3-benzenedicarboxylic acids), has been hydrothermally synthesized and structurally characterized by elemental analysis, IR, TGA and X-ray single-crystal diffraction. The green block crystal of complex 1(C22H18N4Ni O4) belongs to monoclinic system, space group P21/c with a = 10.0418(3), b = 23.8651(6), c = 8.7872(2) A, β = 112.333(3)o, V = 1947.88(9)A3, Z = 4, Dc = 1.572 g/cm3, Mr = 461.11, F(000) = 952, R = 0.0335 and w R = 0.0683 for 2827 observed reflections(I 2σ(I)). Complex 1 exhibits a novel 6-connected 3D sxd type topological framework. The magnetic characterization of complex 1 shows antiferromagnetic coupling exchange.     

Molecular vibrational dynamics of rhodamine B dye in solution studied by femtosecond CARS

Spectrally dispersed femtosecond time-resolved coherent anti-Stokes Raman spectroscopy is utilized to study the ultrafast vibrational dynamics in rhodamine B dye in solution at room temperature. The anti-Stokes intensities are monitored as a function of time and wavenumber. By simply changing the timing of laser pulses, the vibrational dynamics of excited Raman transitions in rhodamine B molecules can be tracked and detected.     

Highly Efficient Deep-Red Non-Doped Diodes Based on a T-Shape Thermally Activated Delayed Fluorescence Emitter

Device simplification is of practical significance for organic light emitting diodes (OLEDs), and remains the great challenge for deep-red emitters. Herein, a deep-red thermally activated delayed fluorescence molecule ( p TPA-DPPZ ) is reported which features a T shaped structure containing two triphenylamine (TPA) donors, one either side of a planar dipyridophenazine (DPPZ) acceptor. The rational spatial arrangement of the functional groups leads to limited but sufficient molecular packing for effective carrier transport. The neat p TPA-DPPZ film achieves an around 90-fold improved radiation rate constant of 10⁷ s⁻¹ and the nearly unitary reverse intersystem crossing (RISC) efficiency, as well as accelerated emission decays for quenching suppression. The high radiation and RISC result in a photoluminescence quantum yield of 87 %. The bilayer OLED based on the p TPA-DPPZ emissive layer achieved the record external quantum efficiencies of 12.3 % for maximum and 10.4 % at 1000 nits, accompanied by the deep-red electroluminescence with the excellent color purity.     

Phosphorene: a Potential 2D Material for Highly Efficient Polysulfide Trapping and Conversion

Effectively trapping lithium polysulfide species and accelerating the reaction conversion kinetics are the main strategies to improve the performance of lithium-sulfur(Li-S) batteries. Since the researchers found in 2014 that two-dimensional(2D) phosphorene nanosheets could be exfoliated from the bulk black phosphorus, numerous researches have been devoted to exploring the phosphorene with unique properties for the application in Li-S batteries. In this review, we summarize the recent theoretical and experimental progress of phosphorene for Li-S batteries. Besides, we also introduce the relationship between the interfacial interaction on phosphorene and the performance enhancement of Li-S batteries. Furthermore, future challenges and remaining opportunities for phosphorene in Li-S batteries are finally discussed.     

Preparation of N-acetyl-para-aminophenol via a flow route of a clean amination and acylation of p-nitrophenol catalyzing by core-shell Cu2O@CeO2

The selectivity and reactivity to converse series nitroaromatic into aminobenzenes are especially significant, which play a vital role in synthesizing required drugs or other fine chemicals. Herein, p-nitrophenol (p-NP) has been completely conversed into p-anomiphenol (p-AP) with a high activity factor k (0.033 s⁻¹·mg⁻¹) and reusability by core-shell Cu₂O@CeO₂ catalyst. N-acetyl-para-aminophenol (paracetamal, APAP) as a model drug was further synthesized via a flow route proceeded in two steps including p-NP reduction and subsequently p-AP acylation with self-constructing device. The yield of the paracetamal is up to 85% with a highly purity. The mechanism investigation justifies the rich-electron centers and cation defects generated from the redox coupled Cu⁺→Cu⁰ with Ce³⁺→Ce⁴⁺ will steer selective conversion of p-NP to p-AP, a rate-determining step in the production of APAP. The present results could visualize a highly selective catalyst and a new synthesis route for pharmaceuticals such as paracetamal by using nitroaromatic compounds as the raw materials with environment-friendly, low-cost, easy-manipulation, high-efficiency and high purity.     

基于神经网络的核电厂设备易损性分析

核电结构的易损性分析是核电厂地震安全评估中至关重要的一环, 但是由于核电结构的复杂性以及考虑土?结相互作用SSI时较大的计算规模, 使得计算核电厂设备易损性曲线十分耗时. 为发展高效的核电厂设备易损性分析方法, 本文采用核电结构土?结相互作用分析的分区计算方法, 并利用有限的SSI分析结果建立神经元模型ANN代替有限元模型, 分别基于对数正态假定的回归法和蒙特卡洛法进行了设备易损性分析. ANN数值模拟包括了以下内容: (1)基于半偏相关系数选择最相关的地震动参数作为ANN输入, 并通过交叉检验建立神经元模型; (2)量化研究ANN数值模拟的预测不确定性, 其中包含了由于简化地震动输入引起的随机不确定性和训练样本缺失引起的认知不确定性; (3)基于ANN模型预测结果分别采用蒙特卡洛法和基于对数正态假定的回归法进行设备的易损性分析. 本文探讨了不同的地震强度指标以及土层材料的不确定性对易损性曲线的影响, 同时验证了回归法中对数正态模型假定的基本合理性, 为核电厂设备易损性分析提供了一种可能方向.      

一种弹体入水冲击波阴影成像可视化系统及其试验研究

扩大成像视野对于开展充水容器中弹体入水冲击波传播及弥散方面的可视化研究具有重要的实际意义。阴影成像技术适用于大视野实验,且对流场冲击波和扰动的可视化研究具有简单性和通用性,其中直接阴影成像最为简单,但可靠点光源的缺乏是阻碍其发展应用的瓶颈。因此基于国产短弧氙灯管,自制了短弧氙灯点光源,根据阴影成像原理,设计出一种弹体入水冲击波阴影成像可视化系统,详细介绍了其组成和运行原理。利用该系统对高速弹体入水进行了试验研究,获得了弹体入水冲击波的阴影成像和冲击波信号的压力时程曲线,通过阴影成像和冲击波信号相结合分析了弹体入水冲击波的传播特性,并进行了理论验证。结果表明:该弹体入水冲击波阴影成像可视化系统具有可靠性和设计的合理性。弹体高速入水后,初始冲击波的强度最大,随着冲击波的传播,冲击波强度逐渐降低,水中冲击波的传播速度不断降低,球形冲击波的半径逐渐增大。