Demetallation of methemoglobin in cellulose nanofibril–TiO2 nanoparticle composite membrane electrodes

Porous composite films containing cellulose nanofibrils (from sisal) and TiO₂ nanoparticles (ca. 6 nm diameter) are obtained in a layer-by-layer assembly process. Each layer consists of ca. 0.18 μg cellulose nanofibrils and ca. 0.72 μg TiO₂ (determined by QCMB) and adds a thickness of ca. 16 nm (by AFM) to the uniform deposit. The TiO₂ nanophase is creating conducting pathways for electrons in a relatively open cellulose structure (ca. 82% open pores) potentially suitable for the immobilization of large redox proteins such as methemoglobin.Methemoglobin is shown to readily adsorb into the cellulose–TiO₂ film. However, electrochemical responses for the immobilized methemoglobin in aqueous 0.1 M phosphate buffer at pH 5.5 suggest that facile demetallation occurs. Experiments with Fe³⁺ in the absence of protein result in voltammetric responses indistinguishable from those observed for immobilized methemoglobin. In the presence of ethylenediamine tetraacetic acid (EDTA) the voltammetric signals for the Fe³⁺ immediately disappear. Complementary experiments conducted in 0.1 M acetate buffer at pH 5.5 demonstrate that methemoglobin can indeed be immobilized in electrochemically active form and without demetallation loss of the voltammetric signal in the presence of EDTA. Demetallation appears to occur (i) in the presence of phosphate, (ii) at pH 5.5, (iii) and in the presence of a charged surface.     

(Liquid + liquid) equilibria for ternary mixtures of (methanol or ethanol + toluene or m-xylene + n-dodecane)

(Liquid + liquid) equilibrium (LLE) results for the ternary mixtures of (methanol or ethanol + toluene or m-xylene + n-dodecane) at three temperatures (298.15, 303.15 and 313.15) K are reported. The compositions of liquid phases at equilibrium were determined by g.l.c. measurements and the results were correlated with the UNIQUAC and NRTL activity coefficient models. The partition coefficients and the selectivity factor of methanol and ethanol are calculated and compared to suggest which alcohol is more suitable for extracting the aromatic hydrocarbons (toluene or m-xylene) from n-dodecane. The phase diagrams for the ternary mixtures including both the experimental and correlated tie lines are presented. From the phase diagrams and the selectivity factors it is concluded that methanol has a higher efficiency as a solvent in extraction of aromatic hydrocarbon from alkane mixtures.     

Suzuki-Miyaura coupling reaction of aryl chlorides using di(2,6-dimethylmorpholino)phenylphosphine as ligand

Suzuki-Miyaura coupling was achieved on a variety of aryl chlorides by using di(2,6-dimethylmorpholino)phenylphosphine (L1) as a bulky electron-rich monoaryl phosphine ligand. We report the couplings of various chlorobenzenes and heteroaryl chlorides.     

Crystal structure of the parent misfit-layered cobalt oxide [Sr2O2]qCoO2

The crystal structure of our newly discovered Sr-Co-O phase is investigated in detail through high-resolution electron microscopy (HREM) techniques. Electron diffraction (ED) measurement together with energy dispersive X-ray spectroscopy (EDS) analysis show that an ampoule-synthesized sample contains an unknown Sr-Co-O ternary phase with monoclinic symmetry and the cation ratio of Sr/Co=1. From HREM images a layered structure with a regular stacking of a CdI₂-type CoO₂ sheet and a rock-salt-type Sr₂O₂ double-layered block is observed, which confirms that the phase is the parent of the more complex “misfit-layered (ML)” cobalt oxides of [M_mA₂O_m+2]_qCoO₂ with the formula of [Sr₂O₂]_qCoO₂, i.e. m=0. It is revealed that the misfit parameter q is 0.5, i.e. the two sublattices of the CoO₂ sheet and the Sr₂O₂ block coexist to form a commensurate composite structure. We propose a structural model with monoclinic P2₁/m symmetry, which is supported by simulations of ED patterns and HREM images based on dynamical diffraction theory.     

Enhanced electrochromic absorption in Ag nanoparticle embedded conjugated polymer composite films

Ag/MEH-PPV {poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]} composite films were prepared by the pulse current electrodeposition of Ag nanoparticles followed by spin coating of MEH-PPV and their enhanced electrochromic coloration was investigated. A relatively uniform Ag nanoparticle array was obtained by the electrodeposition and distinct plasmon absorption bands of Ag nanoparticles were observed. The absorption maximum of Ag/MEH-PPV was much higher than that of MEH-PPV, indicating that the Ag nanoparticles induced an enhanced absorption. In addition, the electrochromic absorption was 1.6 times higher at 500 nm wavelength, with a clearly different coloration compared to MEH-PPV.     

Catalytic vapor-phase oxidation of 2,2,2-trifluoroethanol

The synthesis of trifluoroacetaldehyde by vapor-phase oxidation of 2,2,2-trifluoroethanol using supported vanadium catalysts was studied. Significant differences were observed in the reaction outcomes resulting from different types of catalysts. The ZrO₂- and Al₂O₃-supported catalyst demonstrated both high catalytic activity and selectivity. The addition of co-catalysts such as MoO₃ or SnO₂ improved catalytic performance (Selectivity: up to 91%; S.T.Y.: >200 g L⁻¹ h⁻¹). The experimental results on catalyst lifetime showed a marked decrease in the activity of the Al₂O₃-supported catalyst within tens of hours, while the ZrO₂-supported catalyst showed little, if any, performance alterations for 2000 h.     

Characterization of non-uniformly charged ion-exchange membranes prepared by plasma-induced graft polymerization

Cation-exchange membranes were prepared by plasma-induced grafting of sulfonated glycidyl methacrylate (GMA) and porous polypropylene (PP) membranes. The chemical and physical structures of the prepared membranes were investigated using Fourier transform infrared spectroscopy (FTIR), field emission-scanning electron microscopy (FESEM) and electron-probe micro-analyzing (EPMA). The membranes were also characterized in terms of their electrochemical properties. A non-uniform distribution of fixed charges across the membrane matrix was detected by EPMA analysis. This non-uniform distribution of the fixed charges is the result of using water as solvent for the monomer which led to a fast reaction on the membrane surface and a slow diffusion of the monomer into the pores of the membrane. The prepared membranes exhibited moderate ion-exchange capacities (2.53–3.30 mmol/g dry membrane) and electrical resistances (0.349–0.589 Ω cm²) and an ion permselectivity comparable to that of the commercial membrane CM-1 (Tokuyama Corp.), while the water content of the membranes was significantly higher than that of the commercial membrane. The higher water content of the membranes is the result of water occupying the pores in the bulk of the support membrane after the dense layers with fixed charges are formed on the membrane surfaces by the grafting reaction. The relatively high ion permselectivity in spite of the high water sorption of the membranes is the result of the high fixed charge density in the layers on the membrane surfaces. Current versus voltage curves and the chronopotentiometric measurements revealed that the sulfonated GMA-g-PP membranes can be operated effectively at high current density.     

Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in Nafion-RTIL composite film

The composite film based on Nafion and hydrophobic room-temperature ionic liquid (RTIL) 1-butyl-3-methyl-imidazolium hexafluorophosphate ([bmim] PF₆) was explored. Here, Nafion was used as a binder to form Nafion-ionic liquids composite film and help [bmim] PF₆ effectively adhered on glassy carbon (GC) electrode. X-ray photoelectron spectroscopy (XPS), cyclic voltammtery (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize this composite film, showing that the composite film can effectively adhere on the GC electrode surface through Nafion interacting with [bmim] PF₆ and GC electrode. Meanwhile, doping [bmim] PF₆ in Nafion can also effectively reduce the electron transfer resistance of Nafion. The composite film can be readily used as an immobilization matrix to entrap horseradish peroxidase (HRP). A pair of well-defined redox peaks of HRP was obtained at the HRP/Nafion-[bmim] PF₆ composite film-modified GC electrode through direct electron transfer between the protein and the underlying electrode. HRP can still retain its biological activity and enhance electrochemical reduction towards O₂ and H₂O₂. It is expected that this composite film may find more potential applications in biosensors and biocatalysis.     

Preparation of TiO2 nanocrystallites by hydrolyzing with gaseous water and their photocatalytic activity

TiO₂ nanocrystallites were prepared from precursors tetra-n-butyl titanate (Ti(OC₄H₉)₄) and titanium tetrachloride (TiCl₄). The precursors were hydrolyzed by gaseous water in autoclave, and then calcined at predetermined testing temperatures. The samples were characterized by X-ray diffraction (XRD), thermogravimetry–differential thermal analysis (TG–DTA), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectra (FT-IR), and UV–vis diffuse reflectance spectra (DRS). The photocatalytic activities of the samples were evaluated by the photobleaching of methylene blue (MB) in aqueous solution and the photocatalytic oxidation of propylene in gas phase at ambient temperature. The results showed that the anatase phase nanocrystalline TiO₂ could be obtained at relatively low temperatures (for precursor Ti(OC₄H₉)₄ at 110 °C and for TiCl₄ at 140 °C, respectively), and that the as prepared samples exhibited high photocatalytic activities to photobleach MB in aqueous solution. As the calcination temperatures increasing, the decolor ratio of MB increased and reached the maximum value of nearly 100% at 600 °C, and then decreased. The photobleaching of MB by all samples followed the pseudo-first-order kinetics with respect to MB concentration. The photodecomposition amount of propylene by TiO₂ nanocrystallites calcined at 600 °C from precursor of Ti(OC₄H₉)₄ is 21.6%, which is approaching to that by Degussa P25 TiO₂ (24.9%).     

Gas chromatographic/mass spectrometric and microbiological analyses on irradiated chicken

Ionizing radiation is widely used as treatment technique for food preservation. It involves among others reduction of microbial contamination, disinfestations, sprout inhibition and extension of shelf life of food. However, the commercialization of irradiated food requires the availability of reliable methods to identify irradiated foodstuffs. In this paper, we present results on the application to irradiated chicken of this method, based on the detection, in muscle and skin samples, of the peaks of ions 98 Da and 112 Da, in a ratio approximately 4:1, typical of radiation induced 2-dodecylcyclobutanones (2-DCB). Aim of the work was also to study the time stability of the measured parameters in samples irradiated at 3 and 5 kGy, and to verify the efficacy of the treatment from a microbiological point of view. Our results show that, one month after irradiation at 3 kGy, the method is suitable using the skin but not the muscle, while the measured parameters are detectable in both samples irradiated at 5 kGy. The microbial population was substantially reduced even at 3 kGy.