QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

Twining Poly(polyoxometalate) Chains into Nanoropes

Organic polymers and inorganic clusters belong to two different disciplines and have completely different properties and structures. When a cluster is attached to the backbone of a polymer as a pendant, the resultant hybrid polymers (polyclusters) exhibit unique behaviours totally different from those of conventional polymers owing to the nanoscale size of the cluster and its particular interactions. Herein, the aggregation of a poly(polyoxometalate)—a polynorbornene backbone with inorganic polyoxometalate cluster pendants—upon addition of a non-solvent to its dilute solution is reported. A three-dimensional network of tangled and snake-like nanothreads was observed. Direct visualisation of individual nanoscale clusters enabled identification of single chains within the nanothreads. These observations suggest that during the process of aggregation, the hybrid polymer forms curved or extended chains as a consequence of an armouring effect in which the collapsed cluster pendants wrap around the backbone. The collapse occurs because they become less soluble in the solvent/non-solvent mixture. The extended chains then become entwined and form nanoropes consisting of multiple chains wound around each other. This study provides a deeper understanding of the nature of polyclusters and should also prove useful for their future development and application.     

识别过渡金属离子的1,8-萘二甲酰亚胺多胺衍生物荧光传感器的研究

设计合成了用以检测过渡金属离子的荧光化学敏感器体系,它们是由1,8-萘二酰亚胺为荧光团,多胺衍生物为金属离子受体组成．在室温下对其光物理性质的研究中发现,在没有加入过渡金属离子时,由于体系内存在有效的光诱导电子转移过程使得荧光团的荧光被淬灭．加入过渡金属离子后,金属离子受体中的氮原子和过渡金属离子之间的配位作用阻断了光诱导电子转移过程,体系的荧光增强．不同的金属离子受体表现出了和过渡金属离子不同的配位识别能力,并且通过荧光的变化传递出受体-金属离子作用的信息．     

Effect of additives on the proline-catalyzed ketone–aldehyde aldol reactions

The effect of bases, acids, and water as additives in proline-catalyzed ketone–aldehyde aldol reactions has been studied. While the reaction appears to be relatively tolerant to small amounts of tertiary amine bases or weak acids, it stops completely with strong acids. The use of water as an additive had a highly beneficial effect on reactions that were conducted with a stoichiometric ratio of ketone to aldehyde, especially with cyclic ketones. This allows the efficient use of more precious ketones such as 4-thianone as donors in the direct enantioselective aldol and facilitates purification.     

Newton-Leibniz integration for ket-bra operators in quantum mechanics and derivation of entangled state representations

Newton-Leibniz integration rule only applies to commuting functions of continuum variables, while operators made of Dirac’s symbols (ket versus bra, e.g., |q〉〈q| of continuous parameter q) in quantum mechanics are usually not commutative. Therefore, integrations over the operators of type |〉〈| cannot be directly performed by Newton-Leibniz rule. We invented an innovative technique of integration within an ordered product (IWOP) of operators that made the integration of non-commutative operators possible. The IWOP technique thus bridges this mathematical gap between classical mechanics and quantum mechanics, and further reveals the beauty and elegance of Dirac’s symbolic method and transformation theory. Various applications of the IWOP technique, including constructing the entangled state representations and their applications, are presented.     

纳米MOSFET迁移率解析模型

从玻尔兹曼方程出发，重新计算了纳米MOSFET沟道内的载流子所服从的分布函数，特别是考虑了纳米MOSFET横向电场和纵向电场之间的相互作用，并且以得到的非平衡状态下的分布函数为基础，考虑载流子寿命和速度的统计分布，给出了纳米MOSFET载流子迁移率的解析表达式.通过与数值模拟结果进行比较和分析，该迁移率解析模型形式简洁、物理概念清晰，且具有相当精度. 关键词： 玻尔兹曼方程 纳米MOSFET 迁移率 沟道有效电场     

Direct preparation of silica hollow spheres in a water in oil emulsion system: The effect of pH and viscosity

Silica hollow particles have been prepared in this work in using a water in oil (W/O) emulsion system at room temperature that employs a water-soluble amine as catalyst and tetraethylorthosilicate (TEOS) as the silica source. The pH value of the aqueous phase and the viscosity of external oil phase were found to be the key factors contributing to the formation of stable and regular spherical silica hollow particles. When the pH value of the aqueous phase was controlled between 8 and 9, silica hollow particles could be synthesized. The shell thickness of the hollow particles increased with the length of the hydrocarbon tail of the amine catalyst. The viscosity of the external oil phase determined the shape regularity of the spherical silica hollow particles. If viscous silicon oil was used as the external oil phase instead of kerosene, perfect silica hollow spheres could be fabricated. The kinetics of the formation of silica hollow particles was believed to be based on the difference between the hydrolysis rate and the condensation rate of TEOS, which can be adjusted by the pH value of the aqueous phase and the viscosity of external oil phase.     

Electronic structure of the diaquabis(hydrogen malato) copper(II) crystal

Summary The electronic absorption and e.s.r. spectra of a crystal of the title compound [Cu(H₂O)₂ (C₄H₅O₅)₂] were recorded and experimental results are discussed quantitatively, using ligand field theory and the radial wave function of bound Cu^II. The electronic structure of the compound is consistent with its crystal structure.     

DISTORTION THEOREM FOR BIHOLOMORPHIC MAPPINGS IN TRANSITIVE DOMAINS (III)

The distortion theorem for biholomorphic convex mappings in bounded symmetric domains are considered. Especially the distortion theorem for biholomorphic convex mappings in classical domain of type IV and two exceptional domains are given.