GRAFTING OF ETHYLENE GLYCOL DIMETHACRYLATE ONTO SILK IN AQUEOUS ALCOHOLIC SOLUTION

The grafting of ethylene glycol dimethacrylate (EGDMA) onto silk in aqueous alcohol systems using potassiumpersulfate (KPS) in the presence of air was investigated. Effects of grafting conditions, such as concentrations of monomer,initiator and formic acid, temperature and time, on the graft yield were determined. The optimum graft conditions were foundto be: T = 80℃, t = 30 min, [KPS] = 1.85% [on the weight ofmonomer (owm)]; [formic acid] = 0.2% (V/V); [EGDMA] =80% [on the weight of fiber (owf)]. The activation energy of grafting at 50-80℃ was found to be 71.31 kJ/mol for EGDMA.Grafting equations were also evaluated. The graft yield value can be regulated by the concentration of monomer. The graftcopolymerization of EGDMA onto silk is effective in improving the crease-proofing of silk fabrics.     

Amperometric determination of 6-mercaptopurine on functionalized multi-wall carbon nanotubes modified electrode by liquid chromatography coupled with microdialysis and its application to pharmacokinetics in rabbit

In this paper, multi-wall carbon nanotubes fuctionalized with carboxylic groups modified electrode (MWNT-COOH CME) was fabricated. This chemically modified electrode (CME) can be used as the working electrode in the liquid chromatography for the determination of 6-mercaptopurine (6-MP). The results indicate that the CME exhibits efficiently electrocatalytic oxidation for 6-MP with relatively high sensitivity, stability and long-life. The peak currents of 6-MP are linear to its concentrations ranging from 4.0×10⁻⁷ to 1.0×10⁻⁴ mol l⁻¹ with the calculated detection limit (S/N=3) of 2.0×10⁻⁷ mol l⁻¹. Coupled with microdialysis, the method has been successfully applied to the pharmacokinetic study of 6-MP in rabbit blood. This method provides a fast, sensible and simple technique for the pharmacokinetic study of 6-MP in vivo.     

Effect of γ-radiation on ointment cold cream

In this paper, Co-60γ ray was used to irradiate the ointment cold cream at room temperature (25°C). We also used FTIR, GC and thin film chromatogram to analyse various irradiated samples. It was found that the ointment cold cream can be irradiated at dose of 5–35 kGy and at dose rate from 0.2 to 0.6 kGy/h at room temperature (25°C) without evident decomposition. At dose of 5–15 kGy, the number of bacteria can be reduced to hygienic standard value. The radiation sterilization is a safe method for killing the bacteria in the ointment cold cream.     

A dual-electrode approach for highly selective detection of glucose based on diffusion layer theory: experiments and simulation

A dual-electrode configuration for the highly selective detection of glucose in the diffusion layer of the substrate electrode is presented. In this approach, a glassy carbon electrode (GCE, substrate) modified with a conductive layer of glucose oxidase/Nafion/graphite (GNG) was used to create an interference-free region in its diffusion layer by electrochemical depletion of interfering electroactive species. A Pt microelectrode (tip, 5 microm in radius) was located in the diffusion layer of the GNG-modified GCE (GNG-G) with the help of scanning electrochemical microscopy. Consequently, the tip of the electrode could sense glucose selectively by detecting the amount of hydrogen peroxide (H2O2) formed from the oxidization of glucose on the glucose oxidase layer. The influences of parameters, including tip-substrate distance, substrate potential, and electrolyzing time, on the interference-removing efficiency of this dual-electrode approach have been investigated systematically. When the electrolyzing time was 30 s, the tip-substrate distance was 1.8 a (9.0 microm) (where a is the radius of the tip electrode), the potentials of the tip and substrate electrodes were 0.7 V and 0.4 V, respectively, and a mixture of ascorbic acid (0.3 mM), uric acid (0.3 mM), and 4-acetaminophen (0.3 mM) had no influence on the glucose detection. In addition, the current-time responses of the tip electrode at different tip-substrate distances in a solution containing interfering species were numerically simulated. The results from the simulation are in good agreement with the experimental data. This research provides a concept of detection in the diffusion layer of a substrate electrode, as an interference-free region, for developing novel microelectrochemical devices.     

Microwave-assisted extraction followed by gas chromatography-mass spectrometry for the determination of endocrine disrupting chemicals in river sediments

A method for the simultaneous measurement of trace amounts of phenolic xenoestrogens, such as 2,4-dichlorophenol (2,4-DCP), 4-tert-butyl-phenol (BP), 4-tert-octylphenol (OP), 4-nonylphenol (NP), pentachlorophenol (PCP) and bisphenol A (BPA), in water samples was developed using stir bar sorptive extraction (SBSE) with in situ derivatization followed by thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS) analysis. The conditions for derivatization with acetic acid anhydride were investigated. A polydimethylsiloxane (PDMS)-coated stir bar and derivatization reagents were added to 10 ml of water sample and stirring was commenced for 10-180 min at room temperature (25 degrees C) in a headspace vial. Then, the extract was analyzed by TD-GC-MS. The optimum time for SBSE with in situ derivatization was 90 min. The detection limits of 2,4-DCP, BP, OP, NP, PCP and BPA were 2, 1, 0.5, 5, 2 and 2 pg ml(-1), respectively. The method showed good linearity over the concentration ranges of 10, 5, 2, 20, 10 and 10-1000 pg ml(-1) for 2,4-DCP, BP, OP, NP, PCP and BPA, respectively, and the correlation coefficients were higher than 0.99. The average recoveries of those compounds in river water samples were equal to or higher than 93.9% (R.S.D. <7.2%) with correction using the added surrogate standards. This simple, accurate, sensitive and selective method can be used in the determination of trace amounts of phenolic xenoestrogens in river water samples.     

En route to coordination chemistry under confined conditions in a porous capsule: Pr3+ with different coordination shells

The highly charged nanocontainer capsule of the type [pentagon]12[linker]30 identical with [(Mo)Mo5O21(H2O)6]12[Mo2O4(SO4)]30 with 20 nanosized pores and channels allows the entrance of cations like Pr3+: the latter are positioned at two different sites and have two different coordination shells, corresponding to a coordination chemistry under confined conditions; a fascinating aspect is that capsule encapsulated water shells fixed by hydrogen bonds act formally as polydentate ligands.     

Synthesis,spectroscopy and crystal structure of a new heterodinuclear silver(I)—copper(I) cryptate

A new heterodinuclear cryptate [AgCuL](ClO₄ ^–)₂ was synthesized by transmetallation via its precursor [Ag₂L](ClO₄ ^–)₂ (L = ligand). The electrospray mass spectrum (ES-MS) showed that the heterodinuclear entity exists in the solution. The X-Ray structure analysis shows that the Ag^I ion has tetrahedral geometry while Cu^I lies in a three-coordinate environment.     

Furostanol saponins with inhibitory action against COX-2 production from Tupistra chinensis rhizomes

Two furostanol saponins were obtained from the n-butanol fraction of methanol extract from Tupistra chinensis rhizomes,a folk medicine of Shennongjia Forest District of Hubei Province.Their structures were determined as (25S)-26-O-(β-D-glucopyranosyl)- furost-1β,3β,22α,26-tetrol-3-O-β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→2)-β-D-glucopyranoside (1) and (25R)- 26-O-(β-D-glucopyranosyl)-furost-1β,3β22α,26-tetrol 3-O-β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→2)-β-D-glu- copyranoside (2),on basis of chemical and spectroscopic evidences.1 and 2 displayed marked inhibitory action towards COX-2 production in macrophages of the rat abdomen induced by LPS at 20μg/mL.     

羧酸铜与单螺旋吡啶胺配体自组装的两种新型超分子配合物

Two novel supramolecular complexes [Cu（bpapa）（dhbd）]·CHaOH （1） and [Cu（bpapa）（ma）]·ma （2） （bpapa= bis[6-（2-pyridylamino）pyrid-2-yl]amine, dhbd=2,3-dihydroxybutanedioate dianion, ma=a-methacrylate） were rationally designed, synthesized and characterized by single crystal X-ray diffraction, IR, electronic spectroscopy and thermogravimetric analyses. Complex 1 was the first oligo-a-pyfidylamino complex based on hydroxypolycarboxylate and self-assembled into a 3D honeycomb configuration network with open channels and tubes containing 1D ladder-shaped double chains formed by hydrogen bonds and aromatic π-π stacking interactions. Complex 2 constructed a 2D supramolecular network extended by 1D chains from dimeric supramolecular synthon through noncovalent supramolecular interactions. In the two complexes, the chelating monohelical ligand adopted all-anti configuration. Density functional theory calculations were applied to 1 and 2.     

New liquid‐crystal alignment agents based on fluorinated polyimides with trifluoromethyl‐substituted benzene or diphenylether in the side chain

Fluorinated copolyimides derived from 4,4′‐oxydiphthalic anhydride (ODPA) with 4,4′‐oxydianline (ODA) and trifluoromethyl‐containing aromatic diamines have been synthesized and characterized. The trifluoromethyl‐containing diamines include 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, 3,5‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] benzamide, 3,5‐diamino‐1‐[(3′‐trifluoromethyl) phenyl] benzamide, 1,4‐bis(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl) benzene, 3,5‐diaminobenzenetrifluoride, 4,4′‐diamino‐4″‐(p‐trifluoromethyl phenoxy) triphenylamine, and 4‐[(4′‐trifluoromethylphenoxy) phenyl]‐2,6‐bis(4″‐aminophenyl)pyridine. Strong and flexible copolyimide films, produced by casting the polyamic acid solution followed by thermal imidization, exhibited great thermal stability and high mechanical properties. The polyimides had an ultraviolet–visible absorption cutoff at 330–340 nm and pretilt angles as high as 20° for nematic liquid crystals, making them great potential candidates for advanced liquid‐crystal display applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1583–1593, 2002