The use of carbon nanofibers microcolumn preconcentration for inductively coupled plasma mass spectrometry determination of Mn,Co and Ni

Based on carbon nanofibers (CNFs) as a solid phase extraction adsorbent, a microcolumn preconcentration method coupled to inductively coupled plasma mass spectrometry (ICP–MS) was developed for the determination of trace elements (Mn, Co and Ni). The effect of various experimental parameters such as pH, sample flow rate and volume, elution solution and interfering ions on the retention of the studied ions have been investigated systematically. During all the steps of the experimental process, Mn, Co and Ni could be quantitatively sorbed on the microcolumn containing CNFs in the range of pH 6.0–9.0, and then eluted completely with 0.5 mol ml^− 1 HNO₃. A preconcentration factor of 150-fold was obtained. The detection limits for Mn, Co and Ni were 40, 0.4 and 8.0 pg ml^− 1, respectively, with relative standard deviations less than 6.0%. In order to validate the proposed method, two certified reference materials of human hair (GBW 07601) and mussel (GBW 08571), and water sample were analyzed with satisfactory results. The recoveries were between 95.0 and 114%.     

一类新的手性β-二酮铜(Ⅱ)配合物合成及性质 Ⅰ.( )双[1-对烷氧基苯基-3-对-(2′-甲基丁氧基)苯基-1,3-丙二酮]合铜(Ⅱ)

本文合成了一类新的含手性基团的β－二酮铜（Ⅱ）配合物，双［１－对烷氧基苯基－３－对－（２′甲基丁氧基）苯基－１，３－丙二酮］合铜（Ⅱ），经元素分析、红外光谱及比旋光度测定确定了结构。通过偏光显微镜下相变观察及ＤＳＣ图谱，证实这些配合物没有液晶性，其原因可能在于分子的对称性不好     

材料化学实验课程体系的改革与建设

结合材料化学实验课程自身的特点及材料化学实验教学的经验，系统阐述我院材料化学实验改革的思路，通过深化材料化学实验教学改革，提高任课教师的学术水平，更新教学内容，优化教学模式，推进教材的系统性建设，实现材料化学实验教学质量的提高，激发学生的学习热情与兴趣，进一步培养学生的创新能力。     

General solution for Poisson-Boltzmann equation in semiinfinite planar symmetry

Self-assembled multilayer thin films have been prepared on Au substrate by alternate surface derivatization with L-cysteine hydrochloride and cupric perchlorate. The layer-by-layer structure at each step of multilayer formation was investigated by X-ray photoelectron spectroscopy. The measurements indicate that there are two structure modes in the multilayers. One is that Cu(2+) sandwiches between two amino acid groups. The other one is that Cu(+) is bonded through disulfide and thiolate. This process is also confirmed by cyclic voltammetry of Cu ion at different self-assembled multilayers. Steps further on will lead to repeated multilayer films.     

磷脂酰胆碱与牛血清白蛋白相互作用的FT-IR研究

利用傅立叶变换红外(FT-IR)和拉曼(FT-Raman)光谱研究了高浓度磷脂酰胆碱(PC)与牛血清白蛋白(BSA)的相互作用,及Eu3＋对该作用的影响.FT-IR结果显示,PC/BSA混合体系中二者的相互作用主要发生在PC头部极性基团,且这一作用随BSA含量的增加而增强,作用后蛋白质二级结构中α螺旋的比例有所增加. FT-Raman光谱说明PC与BSA的相互作用影响磷脂CH链的排列有序程度. PC/BSA/Eu3＋体系的红外光谱显示, Eu3＋与PC的磷氧键发生了强相互作用,并使蛋白α螺旋的比例进一步增加.     

直键与弯键的对称性判据

一穹键的提出人们认为,杂化轨道(HAO)角函数的最大值方向(亦即HAO的方向)指向与之键合的原子,这样形成的化学键称为“直键”。但环丙烷分子中的三个碳原子构成三元环,有60°的键角。而任意两个正交的S-P杂化轨道之间的夹角θ都不可能小于90°,因而形成C-C键的HAO,不可能指向键合原子,环上的C-C键不可能是直键,而是“弯键”(BentBond)。通常,人们认为张力分子环上的键是弯键,其他的键为直键。     

稀土配位催化马来酸酐-苯乙烯-N-苯基马来酰亚胺三元共聚合

采用稀土配位催化剂研究了马来酸酐、苯乙烯和N 苯基马来酰亚胺的三元共聚合反应 .考察了Al La物质的量的比、不同稀土元素、催化剂浓度、聚合反应时间、单体配比等因素对共聚合反应的影响 .利用核磁、红外、热分析等方法对共聚物进行了初步的表征     

制备方法对Mg1.9Al0.1Ni合金储氢性能的影响

文中采用机械合金化(MA)和氢化燃烧法(HCS)制备了Mg1.9Al0.1Ni,通过对它们储氢性能的对比研究发现,MA优于HCS.采用MA制得的Mg1.9Al0.1Ni储氢合金具有较高的活性和高储氢量,对PCT结果进行计算,得出温度和氢平衡压的关系式.Mg1.9Al0.1Ni(MA)553K时100s内吸放氢量分别为2.67和2.54 mass%H.用XRD方法进行物相分析,表明添加适量Al没有改变Mg2Ni的物相结构,由于MA能够制备出纳米晶粒,使得Mg1.9Al0.1Ni合金具有更好的储放氢动力学性能.     

Longistylumphyllines A–C,Three New Alkaloids from Daphniphyllum longistylum

Three new alkaloids, longistylumphyllines A–C (1–3), together with the six known alkaloids deoxycalyciphylline B, deoxyisocalyciphylline B, methyl homosecodaphniphyllate, daphnicyclidin A, daphnicyclidin B, and daphnicyclidin F, were isolated from the stems and leaves of Daphniphyllum longistylum. Their structures and relative configuration were elucidated on the basis of spectroscopic data, especially 1D and 2D NMR techniques.     

Maximum overlap symmetry molecular orbital model

This paper provides a brief and systematic presentation of the basic principle and method of the maximum overlap symmetry molecular orbital (MOSMO ) model and its application to simplification of molecular orbital calculation and to calculation of molecular structures and properties, together with some new results about the MOSMO calculation and new insights concerning the further extension of the principle and method. It has been shown that the theoretical method of the MOSMO model is very simple, reliable, and useful and can be employed to study the structure–property relation in even very large molecular systems. The numerical results obtained from the MOSMO calculation on various semiempirical molecular orbital approximation levels show that when the same parametrization, such as one of those employed in EHMO , CNDO /2, and HMO methods, is adopted, the MOSMOS are very close to the canonical molecular orbitals obtained from the customary LCAO method and the MOSMO calculation requires less computing time than does the LCAO method. The MOSMO calculation can be used for rapidly obtaining reasonably good molecular geometries, vibrational frequencies, and other properties of molecules by employing a simple improved semiempirical parametrization. Equilibrium geometries, vibrational frequencies, and other results are in good agreement with the experimental data and the results obtained from ab initio molecular orbital calculation. The basic calculational procedure of the MOSMO model can be extended further and has been employed to give some new results, to propose some new theoretical schemes and principles, and to introduce some new interesting theoretical problems that deserve to be studied further.