ZrO2-TiO2-CeO2的制备及其在NH3选择性催化还原NO中的应用

采用共沉淀法制备了载体材料TiO2、ZrO2-TiO2及ZrO2-TiO2-CeO2, 并利用X射线衍射(XRD)实验、比表面积测定(BET)、程序升温脱附(NH3-TPD)、储氧性能测定(OSC)及程序升温还原(H2-TPR)等方法对三种载体材料进行了表征. 结果表明, ZrO2-TiO2-CeO2具有较多的表面强酸位, 并具有一定的储氧性能和较强的氧化还原性能. 以三种材料为载体, 制备了质量分数分别为1%、9%的V2O5、WO3的整体式催化剂. 研究了三种催化剂在富氧条件下用NH3选择性催化还原NO的催化性能. 结果表明, 以ZrO2-TiO2-CeO2为载体的催化剂在反应空速为10000 h-1, 275 ℃时, NO的转化率接近100%, 具有最好的催化活性,并有良好的应用前景。     

De novo sequencing of tryptic peptides sulfonated by 4-sulfophenyl isothiocyanate for unambiguous protein identification using post-source decay matrix-assisted laser desorption/ionization mass spectrometry

A simple method of solid-phase derivatization and sequencing of tryptic peptides has been developed for rapid and unambiguous identification of spots on two-dimensional gels using post-source decay (PSD) matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The proteolytic digests of proteins are chemically modified by 4-sulfophenyl isothiocyanate. The derivatization reaction introduces a negative sulfonic acid group at the N-terminus of a peptide, which can increase the efficiency of PSD fragmentation and enable the selective detection of only a single series of fragment ions (y-ions). This chemically assisted method avoids the limitation of high background normally observed in MALDI-PSD spectra, and makes the spectra easier to interpret and facilitates de novo sequencing of internal fragment. The modification reaction is conducted in C(18) microZipTips to decrease the background and to enhance the signal/noise. Derivatization procedures were optimized for MALDI-PSD to increase the structural information and to obtain a complete peptide sequence even in critical cases. The MALDI-PSD mass spectra of two model peptides and their sulfonated derivatives are compared. For some proteins unambiguous identification could be achieved by MALDI-PSD sequencing of derivatized peptides obtained from in-gel digests of phosphorylase B and proteins of hepatic satellite cells (HSC).     

Fingerprint quality control of Tianjihuang by high-performance liquid chromatography-photodiode array detection

A novel, simple and accurate fingerprint method was developed using high-performance liquid chromatography-photodiode array detection (HPLC-DAD) for the quality control of Hypericum japonicum thunb (Tianjihuang), a Chinese herbal medicine used for the treatment of several bacterial diseases, infectious hepatitis, gastrointestinal disorder, internal hemorrhage and tumors. For the first time, the feasibility and advantages of employing chromatographic fingerprint were investigated and demonstrated for the evaluation of Tianjihuang by systematically comparing chromatograms with a professional analytical software recommended by State Food and Drug Administration (SFDA). Our results revealed that the chromatographic fingerprint combining similarity evaluation could efficiently identify and distinguish raw herbs of Tianjihuang from different sources. The effects resulted from collecting locations, harvesting time and storage time on herbal chromatographic fingerprints were also examined.     

CBS法合成光学活性二茂铁基醇

以非天然氨基酸合成的手性β-氨基醇(4a～4c)为催化剂，用于不对称硼烷还原反应来合成光学活性的二茂铁基醇(1a～1e)，对映体过量值高达96%。     

Effects of organic solvents on the structure stability of TS-1 for the ammoximation of cyclohexanone

The effects of organic solvents on the ammoximation of cyclohexanone to cyclohexanone oxime with H₂O₂and NH₃ over TS-1 were studied. To investigate the effects of ammonia and organic solvents on the structure stability of the catalyst, TS-1 samples were pretreated under severe conditions in ammonia solution or ammonia solution plus methanol, toluene or t-butanol, respectively, and then characterized bySEM, XRD, FTIR, etc. The results revealed that t-butanol is the best solvent for the ammoximation reaction; ammonia tends to destroy the active sites, -Ti-O-Si- structure in TS-1, but the presence of organic solvents remarkably limits this damaging effect of ammonia.     

Extraction and detection of arsenicals in seaweed via accelerated solvent extraction with ion chromatographic separation and ICP-MS detection

An accelerated solvent extraction (ASE) device was evaluated as a semi-automated means of extracting arsenicals from ribbon kelp. The effect of the experimentally controllable ASE parameters (pressure, temperature, static time, and solvent composition) on the extraction efficiencies of arsenicals from seaweed was investigated. The extraction efficiencies for ribbon kelp (approximately 72.6%) using the ASE were fairly independent (< 7%) of pressure, static time and particle size after 3 ASE extraction cycles. The optimum extraction conditions for the ribbon kelp were obtained by using a 3 mL ASE cell, 30/70 (w/w) MeOH/H2O, 500 psi (1 psi = 7 KPa), ambient temperature, 1 min heat step, 1 min static step, 90% vol. flush, and a 120 s purge. Using these conditions, two other seaweed products produced extraction efficiencies of 25.6% and 50.5%. The inorganic species present in the extract represented 62.5% and 27.8% of the extracted arsenic. The speciation results indicated that both seaweed products contained 4 different arsenosugars, DMA (dimethylarsinic acid), and As(V). One seaweed product also contained As(III). Both of these seaweed products contained an arsenosugar whose molecular weight was determined to be 408 and its structure was tentatively identified using ion chromatography-electrospray ionization-mass spectrometry/mass spectrometry (IC-ESI-MS/MS).     

Synthesis,crystal structure and magnetic property of a binuclear iron(III) citrate complex

The compound (Hql)₂[Fe₂(cit)₂(H₂O)₂]·4H₂O (1) [ql = quinoline, cit^4– = C(O^–)(CO^– ₂)(CH₂CO^– ₂)₂], prepared by reacting ferric nitrate, sodium citrate and quinoline in a molar ratio of 1:1:1 in aqueous solution, was characterized by density measurements, elementary analysis, i.r., X-ray crystallography and magnetic measurements. The X-ray crystallography results reveal that the molecule (1) consists of a binuclear iron(III) citrate anionic complex [Fe₂(cit)₂(H₂O)₂]^2– and two protonated quinolines [Hql]⁺. The anionic complex has a centro-symmetric structure, in which two Fe³⁺ ions are bridged by two ₂-alkoxo groups of the two deprotonated citrate ligands. The other coordination sites of the two slightly distorted octahedra are completed by all the carboxylate groups of the two cit^4– ligands in a monodentate mode, and two coordinated water molecules. Magnetic measurements indicate that the two Fe³⁺ ions are antiferromagnetically coupled below 200 K. A least-squares fit of variable-temperature (1.5–291 K) molar susceptibility data to a dimer model gave the coupling constant J/k = –6.35(7) K and Landé factor g = 2.052(9), where the spin-only Heisenberg–Dirac–van Vleck Hamiltonian is expressed as H = –2J S ₁ S ₂.     

Lanthanum heterocyclic Schiff-base complex initiated ring-opening polymerization of ε-caprolactone

Lanthanum complex supported by the heterocyclic Schiff-base ligand of N-(2-pyridyl)-3,5-di-tert-butyl-salicylaldimine was prepared and employed for the ring-opening polymerization(ROP)ofε-caprolactone(ε-CL).The polymers obtained with this initiator showed a unimodal molecular weight distribution implied that only one active species was present.Mechanism study revealed that the polymerization proceeds via acyl-oxygen bond cleavage.     

Mössbauer Studies on Spin State of the Thermal Decomposition of Substituted Tris (2-Pyridylimine) Iron (II) Thiocyanate

The spin states of iron (II) in FeL₂(NCS)₂ produced from the thermal decomposition of FeL₈(NCS)₂ (L=2-py-CR₁=NR₂, R₁ or R₂=H, Me(CH₃), Ph) under nitrogen atmosphere are investigated by means of Mössbauer spectroscopy and magnetic measurements. It was found that the spin states of iron (II) in substitutited bis (2-pyridylimine) iron (II) thiocyanate are included: intermediate-spin (³T₁, S=1), mixed-spin of ⁵T₂(S=2)+³T₁ and spin incomplete transition of ⁵T₂?³T₁.     

含苯并硒二唑聚咔唑/芴类共轭聚电解质及其前驱体的合成与性能研究

采用Suzuki偶合反应合成了一系列新型的咔唑、芴和2,1,3-苯并硒二唑的共聚物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-双(N,N-二甲基胺丙基)芴](PCzN-BSeD)及其相应的聚电解质衍生物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-(双(3′-(N,N-二甲基)-N-乙基铵)丙基)芴]二溴(PCzNBr-BSeD).在聚咔唑和芴中引入不同比例的2,1,3-苯并硒二唑(BSeD)单元,引起了由咔唑和芴链段向窄带隙苯并硒二唑(BSeD)单元有效的能量转移.通过对聚合物电致发光性能的研究,发现用聚(3,4-亚乙基二氧基噻吩)(PEDOT)或聚(3,4-亚乙基二氧基噻吩)/聚乙烯咔唑(PEDOT/PVK)作为空穴传输层时,器件的性能相差不大,表明咔唑的引入较明显的改善了聚合物的空穴注入性能.而且几乎所有的聚合物用高功函数铝作阴极的器件和用钡/铝作阴极的器件具有相近的发光性能,表明这类聚合物具有良好的电子注入性能.