Heat capacity measurements of MnxFe3−xO4

Heat capacities of Mn_xFe_3?xO₄ with the composition x = 1.0, 1.5, and 2.0 were measured from 200 to 740 K. λ-type heat capacity anomalies due to the ferri-paramagnetic transition were observed for all the compositions. The transition temperatures were 577, 471, and 385 K for the composition x = 1.0, 1.5 and 2.0, respectively, which are in good agreement with the results of magnetic measurements. The difference in heat capacities between the different samples was small except for the temperature range of the transition. The magnetic contribution to the observed heat capacity was obtained by assuming that the heat capacity can be expressed by the sum of the lattice heat capacity C_v (l), the dilation contribution C(d), and the magnetic contribution C(m). Entropy changes due to the transition were obtained from C(m) as 55.5, 50.7 and 49.2 J K^?1 mole^?1 for the composition x = 1.0, 1.5, and 2.0, respectively. The entropy changes were also calculated by assuming the randomization of unpaired electron spins on each ion, but they were from 6 to 10 J K^?1 mole^?1 smaller than the observed ones. The difference between the experimental and the calculated values is roughly explained by taking into account the cation exchange reaction between the tetrahedral and the octahedral sites in the spinel structure.     

Arg-72 of pharaonis phoborhodopsin (sensory rhodopsin II) is important for the maintenance of the protein structure in the solubilized states

In bacteriorhodopsin (bR), Arg-82bR has been proven to be a very important residue for functional role of this light-driven proton pump. The arginine residue at this position is a super-conserved residue among archaeal rhodopsins. pharaonis phoborhodopsin (ppR; or called as "pharaonis sensory rhodopsin II") has its absorption maximum at 498 nm and acts as a sensor in the membrane of Natronobacterium pharaonis, mediating the negative phototaxis from the light of wavelength shorter than 520 nm. To investigate the role of the arginine residue (Arg-72ppR) of ppR corresponding to Arg-82bR, mutants whose Arg-72ppR was replaced by alanine (R72A), lysine (R72K), glutamine (R72Q) and serine (R72S) were prepared. These mutants were unstable in low concentrations of NaCl and lost their color gradually when the proteins were solubilized with 0.1% n-dodecyl-beta-D-maltoside. The order of instability was R72S > R72A > R72K > R72Q > the wild type. The rates of denaturation were reduced in a solution of high concentrations of monovalent anions.     

Distribution of aquatic plants and absorption of radionuclides by plants through the leaf surface in brackish Lake Obuchi, Japan, bordered by nuclear fuel cycle facilities

We investigated the distribution of aquatic plants and the absorption of radionuclides by them in the brackish Lake Obuchi, Japan, which is bordered by nuclear fuel cycle facilities. We studied 5 species of submerged plants: Zannichellia palustris, Ruppia maritima, Potamogeton pectinatus, Zostera japonica, and Z. marina. The plants contained many elements, including radionuclides. The concentrations of ²³⁸U, ¹³⁷Cs, and ⁹⁰Sr in Z. marina were 11.3-12.4, 0.000-0.144, and 0.151-0.202 Bq^.kg^-1 dw, respectively. Those in Z. japonica were 5.2-8.8, 0.000-0.267, and 0.081-0.175 Bq^.kg^-1 dw, respectively. The concentrations of these radionuclides in the plants tended to be higher in higher-salinity regions than in lower-salinity regions of the lake. We found a close relationship between photosynthetic activity and the absorption of stable Sr by plants in the laboratory. Salinity, illumination, and water temperature influenced the photosynthetic activity of the plants and the consequent absorption of elements.     

Stereospecific polymerization of isobutyl vinyl ether. III. Polymerization with VCl3 • LiCl

The polymerization of isobutyl vinyl ether by vanadium trichloride in n-heptane was studied. VCl₃ ? LiCl was prepared by the reduction of VCl₄ with stoichiometric amounts of BuLi. This type of catalyst induces stereospecific polymerization of isobutyl vinyl ether without the action of trialkyl aluminum to an isotactic polymer when a rise in temperature during the polymerization was depressed by cooling. It is suggested that the cause of the stereospecific polymerization might be due to the catalyst structure in which LiCl coexists with VCl₃, namely, VCl₃ ? LiCl or VCl₂ ? 2LiCl as a solid solution in the crystalline lattice, since VCl₃ prepared by thermal decomposition of VCl₄ and a commercial VCl₃ did not produce the crystalline polymer and soluble catalysts such as VCl₄ in heptane and VCl₃ ? LiCl in ether solution did not yield the stereospecific polymer. It was found that some additives, such as tetrahydrofuran or ethylene glycol diphenyl ether, to the catalyst increased the stereospecific polymerization activity of the catalysts. Influence of the polymerization conditions such as temperature, time, monomer and catalyst concentrations, and the kind of solvent on the formed polymer was also examined.     

Nmr spectroscopic studies on the tautomerism in tenuazonic acid analogs

Nmr spectra of structural analogs of tenuazonic acid such as 3-acetyltetramic acid, 3-acetyltetronic acid, 3-acetylthiotetronic acid and others were investigated for elucidation of the tautomeric structures. These compounds have completely enolized β,β′-triketone systems, and the position of the nmr signals for the enolic proton shows that the strength of their intramolecular hydrogen-bonding is weaker than those of acyclic β,β′-triketones and six-membered cyclic triketones. The assignment was made for nmr signals split by the difference of the diamagnetic anisotropic effect in each tautomers. The percentages of each of the tautomers were calculated from the intensities of the corresponding nmr signals. The results were confirmed by means of ¹³C-nmr spectroscopy.     

Synthesis and photochemical properties of a photochromic iron(II) complex of hexaarylbiimidazole

The photochromic ligand bis(terpyridyl)hexaarylbiimidazole (bistpy-HABI) and the Fe(II) complex of bistpy-HABI with formula [{Fe(tpy)}2.bistpy-HABI](PF6)4.4H2O were synthesized and characterized. Bistpy-HABI is readily cleaved into a pair of terpyridyltriphenylimidazolyl radicals (tpy-TPI*) on irradiation with UV light. This photochemical reaction is completely reversible, and the light-induced radicals can thermally recombine to form bistpy-HABI in the dark. [{Fe(tpy)}2.bistpy-HABI]4+ is the first example of a transition-metal complex of an HABI derivative and was found to show photochromic reaction in solution. The spin state of the light-induced radical pair in a frozen matrix was investigated by ESR spectroscopy. The triplet state of the light-induced radical pair from [{Fe(tpy)}2.bistpy-HABI]4+, as well as that from bistpy-HABI, was confirmed to be a ground state or nearly degenerated with a singlet state. Kinetic studies on the radical recombination reaction in solution elucidated the decrease in the activation energy by forming the Fe(II) complex. This is the first observation of a decrease in the activation energy of the radical recombination reaction by the formation of a metal-coordinated radical complex. The syntheses, photochemical properties, and spin states of bistpy-HABI and [{Fe(tpy)}2.bistpy-HABI](PF6)4 are discussed.     

On the topology of compact smooth three-dimensional Levi-flat hypersurfaces

We study topological conditions that must be satisfied by a compactC ^∞ Levi-flat hypersurface in a two-dimensional complex manifold, as well as related questions about the holonomy of Levi-flat hypersurfaces. As a consequence of our work, we show that no two-dimensional complex manifold admits a subdomain Ω with compact nonemptyC ^∞ boundary such that Ω ? ?².     

Distribution and dynamics of radionuclides and stable elements in the coastal waters off Rokkasho Village, Japan, prior to the opening of a nuclear reprocessing facility

A nuclear fuel reprocessing facility is currently under construction in Rokkasho Village, Aomori, Japan. After completion and start-up, this facility will discharge radionuclides into the Pacific Ocean through an outlet pipe set on the seafloor offshore. For future assessments of the stability of these radionuclides in the environment, a sufficient understanding of the behavior of radionuclides in this ocean ecosystem before the start-up of the facility is necessary. To understand the processes by which radionuclides and various other types of elements are eliminated from seawater, we measured the sedimentation flux of suspended particles in the coastal waters off Rokkasho Village where the sea emissions pipes will be placed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Metal-ion-assisted hydrolysis of dipeptides involving a serine residue in a neutral aqueous solution

Dipeptides having a serine residue at the C-terminus, X-Ser, where X is an appropriate amino acid residue, were efficiently hydrolyzed in the presence of ZnCl2 at pH 7.0. The rapid hydrolysis of X-Ser is due to an autocatalysis of the hydroxy group in the serine residue, and is found to be accelerated by a metal ion, in particular by ZnCl2. Roles of the metal ion in the hydrolysis of peptides involving a serine residue, in relation to the recently reported protein cleavages, are discussed.     

Preparation and characterization of polypropylene/mesoporous silica nanocomposites with confined polypropylene

Polypropylene (PP)/Ti-MCM-41 nanocomposites were prepared by isospecific propylene polymerization with Ti-MCM-41/Al(i-C₄H₉)₃ catalyst. The cross polarization/magic angle spinning (CP/MAS) ¹³C NMR spectrum of the composite was similar to that of the conventional isotactic PP, and the decrease in the pore volume of Ti-MCM-41 in the nanocomposites, as measured by N₂ adsorption, was consistent with the value calculated from the weight loss in the thermogravimetric analysis (TGA) curve; both these facts attest to propylene polymerization within the mesopores of Ti-MCM-41. Alkali treatment followed by extraction with o-dichlorobenzene allows us to extract the confined PP out of the Ti-MCM-41 mesopores. Although the PP/Ti-MCM-41 nanocomposites do not exhibit a crystalline melting point, the same PP when extracted from the mesopores showed a clear melting point at 154.7 °C; this indicates that the crystallization of PP confined in mesopores is strongly hindered. For the PP polymerized within the confinement, the molecular weight (M_w) and molecular weight distribution (M_w/M_n) were 84,000 and 4.3, respectively; these values were considerably smaller than those of the PP polymerized concurrently outside the Ti-MCM-41 mesopores (M_w = 200,000–450,000, M_w/M_n = 40–75). Therefore, the confinement also has a marked effect on the molecular weight of the PP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3324–3332, 2003