Diastereo‐ and Enantioselective Synthesis of Organometallic Bis(helicene)s by a Combination of C?H Activation and Dynamic Isomerization

Homochiral and heterochiral cis‐bis‐cycloplatinated‐[6]helicene derivatives 1 b^{1, 2} , as representative examples of platina[6]helicenes that share a common platinum center, have been prepared. A diastereo‐ and enantioselective synthesis, which combines CH activation and dynamic isomerization from heterochiral structure 1 b² into homochiral structure 1 b¹ , is also described. Overall, this isomerization process results in the transfer of chiral information from one helicene moiety to the other one. The chiroptical properties of homochiral (P)‐ and (M)‐ 1 b¹ were greatly modified upon oxidation into their corresponding (P)‐ and (M)‐diiodo‐Pt^IV complexes ( 5 ). The changes were also analyzed by performing theoretical calculations. C? H activation in the synthesis of organometallic helicenes is further demonstrated by the preparation of cis‐bis‐cycloplatinated‐[8]helicene 1 c .     

Alkylation/elimination from azetidinium ylides: an entry to functionalized acrylonitriles

Azetidinium triflates were reacted in a one-pot two-steps sequence involving, generation of an azetidinium ylide, its alkylation with an halide, and final regioselective Hofmann elimination of the produced alkylated azetidinium ion to yield substituted α,β-unsaturated nitriles bearing an aminoethyl side-chain. The scope of this sequence was examined, and was found to depend both on the steric hindrance around the reactive center in the starting azetidinium salt, and on the nature of the reacting halide. Produced acrylonitriles were further used in DBU-catalyzed conjugate addition of amines, to yield 4-amino-2-aminomethyl-butyronitriles with fair diastereoselectivity, or, alternatively, to give C₂ symmetrical cyclopropanes.     

Polyluminol/hydrogel composites as new electrochemiluminescent-active sensing layers

This paper reports on electrochemiluminescent sensors and biosensors based on polyluminol/hydrogel composite sensing layers using chemical or biological membranes as hydrogel matrices. In this work, luminol is electropolymerized under near-neutral conditions onto screen-printed electrode (SPE)-supported hydrogel films. The working electrode coated with a hydrogel film is soaked in a solution containing monomeric luminol units, allowing the monomeric luminol units to diffuse inside the porous matrix to the electrode surface where they are electropolymerized by cyclic voltammetry (CV). Sensors and enzymatic biosensors for H₂O₂ and choline detection, respectively, have been developed, using choline oxidase (ChOD) as a model enzyme. In this case, hydrogel is used both as the enzymatic immobilization matrix and as a template for the electrosynthesis of polyluminol. The enzyme was immobilized by entrapment in the gel matrix during its formation before electropolymerization of the monomer. Several parameters have been optimized in terms of polymerization conditions, enzyme loading, and average pore size. Using calcium alginate or tetramethoxysilane (TMOS)-based silica as porous matrix, H₂O₂ and choline detection are reported down to micromolar concentrations with three orders of magnitude wide dynamic ranges starting from 4?×?10^?7 M. Polyluminol/hydrogel composites appear as suitable electrochemiluminescence (ECL)-active sensing layers for the design of new reagentless and disposable easy-to-use optical sensors and biosensors, using conventional TMOS-based silica gel or the more original and easier to handle calcium alginate, reported here for the first time in such a configuration, as the biocompatible hydrogel matrix. Figure

Elaboration of electrochemiluminent polyluminol/hydrogel composite sensing layers     

One step nanoencapsulation of corrosion inhibitors for gradual release application

The direct application of corrosion inhibitors on metal surfaces is potentially dangerous for the environment and the restoration operators, thus new conservation strategies are mandatory. In this study, two copper corrosion inhibitors, 1H-benzotriazole (BTA) and 5-phenyl-1H-tetrazole (PT), are encapsulated in a silica nanocontainer, for future application in smart coatings, with the aim to reduce the amount of chemicals used in treatments, their dispersion in the environment and the direct exposure of the operators to these chemicals. In particular, composite silica nanocapsules, containing the corrosion inhibitors, are prepared via one-step synthesis, based on mini-emulsion polymerisation processes.The morphology, structure, and texture of these loaded silica nanocontainers are characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ physisorption (BET/BJH). Micro-Raman spectroscopy (RS) is performed to characterise the composition. UV–visible spectroscopy and thermal analysis (TG/DSC) are performed for the loading and encapsulation efficiency (L%, EE%) study.Synthesised nanocapsules show a core-shell structure and, when loaded with the inhibitors, have size ranging from about 130 to 170 nm and a BET surface area of the order of 800 m²/g. The EE% is maximum in the case of BTA and decreases to ～52% in the case of PT.     

Rational Development of a Metal-Free Bifunctional System for the C−H Activation of Methane: A Density Functional Theory Investigation

The activation or heterolytic splitting of methane, a challenging substrate usually restricted to transition metals, has so far proven elusive in experimental frustrated Lewis pair (FLP) chemistry. In this article, we demonstrate, using density functional theory (DFT), that 1-aza-9-boratriptycene is a conceptually simple intramolecular FLP for the activation of methane. Systematic comparison with other FLP systems allows to gain insight into their reactivity with methane. The thermodynamics and kinetics of methane activation are interpreted by referring to the analysis of the natural charges and by employing the distortion-interaction/activation strain (DIAS) model. These showed that the nature of the Lewis base influences the selectivity over the reaction pathway, with N Lewis bases favoring the deprotonation mechanism and P bases the hydride abstraction one. The lower barrier of activation for 1-aza-9-boratriptycene and the higher products stability are due to a better interaction energy than its counterparts, itself due to electrostatic interactions with the methane moiety, favorable orbital overlaps allowed by the side-attack, and space proximity between the B and N atoms.     

Bipolar Electrochemiluminescence Imaging: A Way to Investigate the Passivation of Silicon Surfaces

This work depicts the original combination of electrochemiluminescence (ECL) and bipolar electrochemistry (BPE) to map in real-time the oxidation of silicon in microchannels. We fabricated model silicon-PDMS microfluidic chips, optionally containing a restriction, and monitored the evolution of the surface reactivity using ECL. BPE was used to remotely promote ECL at the silicon surface inside microfluidic channels. The effects of the fluidic design, the applied potential and the resistance of the channel (controlled by the fluidic configuration) on the silicon polarization and oxide formation were investigated. A potential difference down to 6 V was sufficient to induce ECL, which is two orders of magnitude less than in classical BPE configurations. Increasing the resistance of the channel led to an increase in the current passing through the silicon and boosted the intensity of ECL signals. Finally, the possibility of achieving electrochemical reactions at predetermined locations on the microfluidic chip was investigated using a patterning of the silicon oxide surface by etched micrometric squares. This ECL imaging approach opens exciting perspectives for the precise understanding and implementation of electrochemical functionalization on passivating materials. In addition, it may help the development and the design of fully integrated microfluidic biochips paving the way for development of original bioanalytical applications.     

Impact of Matrix Metalloproteinase-9 during Periodontitis and Cardiovascular Diseases

Matrix metalloproteinase-9 (MMP-9) has been shown to play a key role in endothelial function and perhaps pivotal in the correlation between periodontal disease and cardiovascular disease (CVD). For the study, the impact of MMP-9 of periodontitis and CVD on serum and saliva concentrations was analyzed. For the study patients with periodontitis (n = 31), CVD (n = 31), periodontitis + CVD (n = 31), and healthy patients (n = 31) were enrolled. Clinical and demographic characteristics as well as serum and salivary MMP-9 were evaluated. MMP-9 concentrations in serum and saliva were statistically elevated in patients with CVD (p < 0.01) and in patients with periodontitis plus CVD (p < 0.001) compared to patients with periodontitis and healthy subjects. Multivariate regression analysis showed that c-reactive protein (hs-CRP) was the only significant predictor for MMP-9 serum (p < 0.001), whereas hs-CRP (p < 0.001) and total cholesterol (p = 0.029) were the statistically significant salivary MMP-9 predictors. This study evidenced that patients with CVD and periodontitis + CVD presented elevated MMP-9 concentrations in serum and saliva compared to patients with periodontitis and healthy subjects. Furthermore, hs-CRP was a negative predictor of serum and salivary MMP-9.     

Third Generation ATP Sensor with Enzymatic Analyte Recycling

For the first time the direct electron transfer of an enzyme ‐ cellobiose dehydrogenase, CDH ‐ has been coupled with the hexokinase catalyzed competition for glucose in a sensor for ATP. To enhance the signal output for ATP, pyruvate kinase was coimmobilized to recycle ADP by the phosphoenolpyruvate driven reaction. The new sensor overcomes the limit of 1 : 1 stoichiometry of the sequential or competitive conversion of ATP by effective enzymatic recycling of the analyte. The anodic oxidation of the glucose converting CDH proceeds at electrode potentials below 0 mV vs. Ag|AgCl thus potentially interfering substances like ascorbic acid or catecholamines do not influence the measuring signal. The combination of direct electron transfer of CDH with the enzymatic recycling results in an interference‐free and oxygen‐independent measurement of ATP in the lower µmolar concentration range with a lower limit of detection of 63.3 nM (S/N=3).     

Elevated Catalytic Activity of Ruthenium(II)–Porphyrin‐Catalyzed Carbene/Nitrene Transfer and Insertion Reactions with N‐Heterocyclic Carbene Ligands

Bis(NHC)ruthenium(II)–porphyrin complexes were designed, synthesized, and characterized. Owing to the strong donor strength of axial NHC ligands in stabilizing the trans M?CRR′/M?NR moiety, these complexes showed unprecedently high catalytic activity towards alkene cyclopropanation, carbene C? H, N? H, S? H, and O? H insertion, alkene aziridination, and nitrene C? H insertion with turnover frequencies up to 1950 min^?1. The use of chiral [Ru(D₄‐Por)(BIMe)₂] ( 1 g ) as a catalyst led to highly enantioselective carbene/nitrene transfer and insertion reactions with up to 98 % ee. Carbene modification of the N terminus of peptides at 37 °C was possible. DFT calculations revealed that the trans axial NHC ligand facilitates the decomposition of diazo compounds by stabilizing the metal–carbene reaction intermediate.